2 weeks ago I dropped my cell phone, shatering the screen. I replaced the screen myself today (looks good a new) but I have 1 problem the calabration is all off, so I am wondering is there a way to calabrate the touch screen, I remember back with my old palm pilot there was a program that would have you touch the screen in 9 points to calabrate the screen is there a way to do that with the cliq?
View 6 Replies
I just got this phone from someone who upgraded up. If I only want to use it for calls and texting and nothing else, should I update from its current system version 1.6 / Firmware version 1.5?If I wanted to do this manually, are system and firmware updates done separately and where are the download pages to do it manually?There are threads talking about how updates slowed down CLIQ MB200 phones. Do they slow down the basic functions of this phone? I see there are Android platform versions all the way up to 3.2. Is version 2.1 the last version compatible with MB200?Some threads compare updating this phone to installing Windows 7 or Vista on older computers - they would slow down basic functions on them so it's really not worth it to update. Is that comparison true when it comes to this first Android phone?
View 2 Replies View RelatedI have a Motorola Cliq updated to 2.1.5 through T-mobile.Up until this weekend, I had no problem getting Data pushed through whether I was in my area or my boyfriends area (his is non 3G and he does NOT have WiFi) ...I was at his place this weekend, and my Data ONLY pushed through when I was in a WiFi area and I had WiFi enabled.he problem is, now that I'm home IN A 3G AREA my Data STILL only pushes through when WiFi is enabled. I get NO INTERNET CONNECTION at all.I can't even get my phone to be recognized through the Motorola Troubleshooter now when it IS plugged into my laptop via USB ....Hoping to avoid a reset, even though I have everything synched through my Blur acct and Gmail
View 4 Replies View RelatedI inherited a Cliq 2 from my father-in-law and I have a T-Mobile sim in it right now. When I look at the system version, it is saying 1.1.28. From all the info that I've read, the latest version is 1.1.30. I've tried doing a system update from the phone, but it tells me that I am up to date.
View 2 Replies View RelatedThe screen has been cracked recently, so my brother took it upon himself to buy me a Cliq (MB200) from someone off CraigsList for my birthday. I am not sure if this is the route I would had gone but it's not like he can take it back now. Luckily it is a Cliq with a T-Mobile emblem on it, which is my carrier, so there shouldnt be any problems. And it appears to be in excellent condition.OK, time to transfer the SIM card.First, we cannot get the newly purchased Cliq to recgognize my SIM card. It is an old T-Mo SIM card that has been transferred from A Samsung T-719 purchased in 2007 to a BB Pearl to a BB Curve and then to the Cliq2 bought in 2011. I do have newer SIM cards that have never been opened or activated, so that could be an option. But the SIM works fine in my Cliq2. But in the newly purchased Cliq we immediately get the "Please insert SIM card" message on the screen.Yes, we did do a factory reset and then re-tested the SIM.Wi-Fi works.We were curious if the SIM Card can't be read until we go through the Motoblur registration.Also, can the Motoblur info just be transferred from the Cliq2 to the SIM Card or SD Card so I don't have to login on the newly purchased Cliq?I forgot my Motoblur password and it is registered with an inactive email address, so a password recovery via email is not an option. Should I just open a new Motoblur account? Will it let me connect the same emails and social media accounts as the old Motoblur account?
View 5 Replies View RelatedI had a Motorola CLIQ for about a year already and after all the trouble i had with it...i dealt with it. Then last week my phone was totally messed up with the ghost screen problem (screen moves by itself). SO i called T-Mobile and like always the only thing to do is to reboot which i already did once when my phone was stuck on the moto blur screen. I asked for new one with my warranty. 5 days later (today) i get a new CLIQ. Started it up...waiting...Moto Blur sign in screen comes up...sign in...waiting...google sign in screen comes up...sign in...waiting...DONE! NOW I CAN FINALLY TEXT! i guessed wrong. The normal screen comes up with the green leaves with the old vesion of Android 1.5 (Cupcake) and then all of the sudden the screen turns black. The notification window (on the top) shows but under that its just black. 1 second later it shows the wallpaper...and then another second later it shows the black screen and has been doing that for 4 hours already. I pulled out the battery turned it off, charged it but nothing works and I DO NOT WANT TO WAIT ANOTHER 5 DAYS TO GET A NEW PHONE THATS ALREADY BROKEN IN THE FIRST PLACE. Is anyone having or had the same problem because i cant get anywhere through my phone. I also put a video since i dont see this problem anywhere in the forums.
View 9 Replies View RelatedHalf of my screen is not working
View 4 Replies View RelatedAfter unlocking and entering my password, the top drop down menu jumped to the bottom. The menu accessability was still functioning from the top, however the entire screen shifted up. When I try to tap an app in the new, offset position, it will select the app below the one I am going for, suggesting that the digitizer is okay. When this shift happens, I press the lock button twice, swipe to unlock and it is good as new.....at least for a while. Now, there are times that, when I press the unlock button, there is only a black screen that lights up. I then press the lock button until my unlock screen appears.
I am running 2.1 and this was a replacement cliq, as my original took a swim in the terlit
I recently replaced the screen on this phone and since then I have not had a successful boot up with the phone. I have checked all connections inside and everything is intact. Without any display I am able to do a factory reset but cannot 'Recover' or 'Fastboot'. Additionally, I am able to get to USB Bootloader Init but do not know steps to proceed. I am not able to read SD card from USB connection to PC. Senses phone but does not show SD or content. Some clarity about whether this is a salvageable situation or not. I'm thinking that OEM ROM software is toast and needs to be reflashed onto ROM but not sure what the steps are for this.
View 1 Replies View RelatedI have Motorola CLIQ and updated to Blur 2.1.5 on April. Currently, when I click to start recording, the screen will freeze; but the recording counter time on top left is still continuing. Once click again to stop recording, the file will shows error and cannot play. I try to reboot the system, and it didn't work. The App I have are: Angry Birds, Barcode Scanner, Gas Buddy, Google Maps, Skype, Translate, WhatsApp, Zillow.
View 4 Replies View RelatedThe last time the display functioned I was starting a play-list for my shower. I adjusted the volume once or twice without lighting the screen, and after drying off stopped the music by removing the speaker jack again without lighting the screen. The device then went into my shirt pocket and I ate dinner then watched a movie but when I tried to do a little surfing before bed the screen wouldn't light up. I had seen it light up the buttons but take a few seconds for the display when the CPU was busy so I waited, nothing happened. I pulled the battery and tried again, nothing on the screen. But then I discovered that the touch sensor was still functioning, I could swipe to unlock and power down in the standard fashion just blind. I have examined the water stickers they are both white with bright red X's.
While writing this question (I am sure many of you already know this fact) I discovered that the display of my device is in fact three distinct functional parts. The capacitive touch screen still in operation on my device, the LCD image generator also still in operation, and the Led illumination source which for lack of a more accurate description is burned out.So my question is how could this occur, is it software or hardware, and what are my recourses?
I have read somewhere that there is a proceeding to calibrate the magnetic compass on the 5230, and my questions are:
1) The 5230 has a magnetic compass built in it? Where it is documented?
2) It is used in navigation using Ovi Maps? How and when?
3) How I can calibrate it, making the 360 turn, as suggested elsewhere? On what screen/menu is the function selected?
I have this weird thing going on with my Atrix. I've had it for about six months and it was fine until now. What happens is that the touchscreen stops responding after it is turned off (pressing the power button) and back on. I can't unlock the phone, but the volume buttons are still responsive and I can still turn off the screen. If i reboot it (by removing the battery), it boots up just fine, with the screen working perfectly. It'll sometimes stop working when ending a call. The weird thing is that it doesn't happen everytime I turn off the screen, and when it happens, if I turn it off and back on it sometimes starts working again. It also seems to happen more frequently when the battery is low.
View 1 Replies View RelatedMy 5800 touch screen is not responding well like any touch screen should. Compared with my friend's phone and he said there is definite problem with touch. Now is this rectifiable? Or better to go for an exchange? I dont trust Nokia Care because my e72 is still with them for some error which they are not explaning properly. Poor customer service.
View 2 Replies View RelatedI rmb someone else reported this but I can't find the post. who else had this problem? the left side of my touchscreen when closed has a gap now with the keyboard to the point where if i press on the touchscreen, it will depress and "click".it's getting really annoying and i'm trying to "bend" the slider back so it doesn't but obviously that doens't help.
View 1 Replies View RelatedTouch screen not responding on the right, at the time of writing the letter "p" or "0" in an upright position in a horizontal position can not open the notification bar.What should I do torecalibrate the touch screen of my Motorola Atrix 2?
View 3 Replies View RelatedThe touch screen is blocked several times it doesn't care any stop or on/off buttons it's necessary to take out the battery.
View 1 Replies View RelatedJust got my Electrify Friday, and so far I have dropped just about every call I have made with it. The screen doesn't turn off during calls and I am either pushing every button and trying to conference in the Moon, or I hang up.
I've turned on and off the pocket mode, I've rebooted with it on, and off. I've turned pocket mode off, rebooted, and then turned it back on. Nothing has worked. I don't have a case on it, I don't have a screen protector on it.
I've had this problem since i got the phone.When it's on the charger, and i need to use it, the touch screen will be very uneven in its responsiveness... Sometimes it will read my gestures and taps, sometimes not.
View 7 Replies View RelatedWhen I connect with the Standard Dock or Webtop travel Adaptor and sometimes with usb to my computer: The touch screen does not respond. Even stranger, I found out by accident while on a call to Motorola that if I use my finger nail it will work, just not smooth. I did not think a finger nail was supposed to work. Motorola told me to go to the Verizon store and see if any other device had the issue. Verizon said they could not connect to webtop and as expected the usb did not have any issues.Is this my phone only or are there any others with the same issue?I was thinking of getting a replacement, but they said I could only get a referb He told me a finger nail would not work, so I demoed it for him.He told me to wait for the Nov updates, but I don't see anything like this on the list.Is anyone using the Webtop travel adaptor with desktop PC. Mine is Windows 7.
View 6 Replies View RelatedSo there I was saving an alien world by killing one jelly at a time when my screen completely quit responding to touch. First thought was my Razr just had its first freeze/reboot but the sound was still going and the jellies still marching toward my precious gems. Instantly realized my Razr was ignoring me. Tried my side keys and they worked as usual, sound keys toggled sound up and down and lock key locked/opened power menu but was unable to select any options as the touch sense was still out to lunch. It's been almost a half hour and the screen is stuck on the lock screen and won't even dim. Which coincidentally is a good thing b/c it's way to much work to pull the battery on these things .
View 2 Replies View RelatedGot My Defy 2 days back. Last night it rained heavily and I had to walk from my office to home. It was a 30-35 minute walk. I put my Defy in my pocket and started walking thinking its a water proof phone. When I reached home, first the phone's screen didn't respond to any touch. After a minute it went completely black and I could see heavy moisture under the glass. Only sensors were throwing some colored lights. I tried to call from my friend's phone on my number, and I could listen to the ringtone only. I could not pick up the call since there was nothing at all on screen. Today I put the phone in rice for around 8 hours still the condition is same. Its very unfortunate that I could use and explore my phone properly even for 2-3 days.
View 4 Replies View RelatedDoes anyone know how to replace the touch screen glass? I bout a replacement, but am not getting any support from the company I bought it from. Most of the phone is apart. I just can't get the phone itself and screen seperated at the rotary hinge.
View 1 Replies View RelatedI just bought the new Nokia 5233 phone.Whenever the phone is locked and I set a alarm. There is no way i can stop the alaram other than to reset the alarm manually by alarms-> edit.
There will be two touch buttons that apper on the otuch screen. One to stop and other to snooze the alarm. Even If press them, it wont work. The alaram keeps ringing. I even tried clicking on the green button and the menu botton at the bottom. Still no use. I cant even unlock the phone. Only thing i can do is press the red button at the end, which will snooze the alarm. After this, I have to manually change the alarm time.
The same thing happens even with phone calls. I cannot use the touch button that apper on the touch screen. I have to use the green and red button at the bottom.These problem come into picture only if the phone is locked. Otherwise it works fine.
Motorola Droid Turbo (v. 1) Ballistic - I have a dead spot on the upper left hand corner of the screen, annoyingly right where a menu or "back" navigation button usually is in an app. I have confirmed this one spot is dead to the touch with a screen tester. When I turn my phone off and back on, it reactivates the spot for a time, then eventually it goes dead again. This phone is less than 2 weeks old...I just got my settings just the way I like them.
View 3 Replies View RelatedWhen I connect my phone to a wall charger (provided my Motorola), the touch screen responds rarely (slowly). As soon you disconnect the charger it works fine. I had talked to Motorola specialist over the phone and she provided me with a new charger. However, the problem still persists.
Yesterday, I used a Blackberry charger (with very close voltage and current output) and the phone worked fine.
Looks like I will be heading to Verizon tomrrorow for an exchage on my DROID after 3 weeks with it. Today, suddenly, the bottom icons are no longer responding to touch. I cannot click the phone dialer, SMS, camera or app icons. Anything above this first row still works fine. I did a factory reset on the phone and still no luck.
View 9 Replies View RelatedI've had my Defy for almost a year and avoid sending text because the screen is not touch sensitive. It is pretty constant. I have to just about bash the screen to get any response when trying to input text. It also happens when trying to answer the phone or select apps.
View 1 Replies View RelatedI picked up my phone as I usually do, slid open the keyboard, typed out a text message, and then attempted to press the send button with my finger. For some reason, my touch didn't register and I had to manually select the send button by using the keyboard. I thought it was a glitch, however I am not able to select anything using the touch screen with the keyboard open. For example, if I press the lock button and attempt to unlock my phone with the touchscreen while the keyboard is open, I get no response. Also, if the keyboard is open and I try to open an app or perform any function using the touch screen, I recieve no response. However, the touch screen performs perfectly fine with the keyboard close. The main reason I got the Droid 2 was because of the physical keyboard paired with the touchscreen so I would like to fix this problem as soon as possible.
View 7 Replies View RelatedDiscovered something annoying today - the touch screen doesn't respond when it gets even slightly cold. It's 46F here today and during my short run, the screen stopped responding to touch. After coming indoors for just a minute or so, it's working fine.I couldn't stop my workout right away, though, so my measurements are off - that's the annoying bit. Has anyone had similar issues?
View 6 Replies View RelatedTouch Screen stops working when launching Camera
View 3 Replies View Related
