Motorola Cliq :: Continuously Reboots Over And Over?
Mar 31, 2012The phone continuously reboots over and over after displaying the error message - "process system is not responding"
View 3 RepliesThe phone continuously reboots over and over after displaying the error message - "process system is not responding"
View 3 RepliesI have a Cliq Xt and it reboots. I have read many forums and do not see a clear answer. Will rooting the phone and upgrading to gingerbread solve the problem?
View 1 Replies View RelatedMy Atrix 2 (on AT&T) operating system was upgraded to 2.3.6 this morning and since then it has been continuously rebooting (going off then on again) every few minutes. I have removed the battery and replaced it. It still did it. I have NOT done a HARD reboot.
I am also getting the "Process system is not responding" error message and a blue bar that says that it is having trouble connecting to the network.
UPDATE:
After hours of rebooting, (I had it charging throughout the time) it has stopped and is acting "normally". I am worried that it will start again and I don't have a fix.
Here I am, 2 weeks later and it started continuously rebooting again. No new updates, no new apps, no new anything. What I did notice was that the battery was below 20%. I have plugged it in and will wait to see if it stops by itself again. The fix described below is requiring too much from a non-technical. I do not have Motoblur. My calendar and contacts are backed up to my gmail account and LOOKOUT.
It continued to reboot for over a day. I went to the AT&T store. They gave me a new phone!
My 9700 reboots continously, shows white BB logo, reboots 30% of way, turns off and reboots.
View 1 Replies View RelatedSo recently my BB storm died so i plugged it in to charge, after a while i came back to it and it wouldn't boot up, it would just continuously reboot. I took it to the verizon store, they didn't help to much. So i came back home tried turning it on and it powered on to a white screen the said "Reload Software, 507" or something like that. So i plugged it in to my computer, launched DM and restored the whole phone back to original .328 OS. After it was done it started working, i was happy until it stopped working again. I let it charge over night and turned it back on in the morning and same thing happened.
I tried the App Loader wizard itself, and i got this message: "The blackberry Desktop software does not have blackberry device software for the device you have connected to the computer. Contact your wireless service provider or system administrator."
My blackberry battery died one afternoon and when i started to charge it, the reboot screen kept appearing followed by the red LED light before attempting to reboot again. i have tried installing the new software but it is still rebooting half way stopping, LED light comes on and the whole process continues. the bb is only 2 months old and hasnt been dropped or damaged in any way. could the battery need replaced?
View 5 Replies View RelatedI just got this phone from someone who upgraded up. If I only want to use it for calls and texting and nothing else, should I update from its current system version 1.6 / Firmware version 1.5?If I wanted to do this manually, are system and firmware updates done separately and where are the download pages to do it manually?There are threads talking about how updates slowed down CLIQ MB200 phones. Do they slow down the basic functions of this phone? I see there are Android platform versions all the way up to 3.2. Is version 2.1 the last version compatible with MB200?Some threads compare updating this phone to installing Windows 7 or Vista on older computers - they would slow down basic functions on them so it's really not worth it to update. Is that comparison true when it comes to this first Android phone?
View 2 Replies View RelatedI have a Motorola Cliq updated to 2.1.5 through T-mobile.Up until this weekend, I had no problem getting Data pushed through whether I was in my area or my boyfriends area (his is non 3G and he does NOT have WiFi) ...I was at his place this weekend, and my Data ONLY pushed through when I was in a WiFi area and I had WiFi enabled.he problem is, now that I'm home IN A 3G AREA my Data STILL only pushes through when WiFi is enabled. I get NO INTERNET CONNECTION at all.I can't even get my phone to be recognized through the Motorola Troubleshooter now when it IS plugged into my laptop via USB ....Hoping to avoid a reset, even though I have everything synched through my Blur acct and Gmail
View 4 Replies View RelatedI inherited a Cliq 2 from my father-in-law and I have a T-Mobile sim in it right now. When I look at the system version, it is saying 1.1.28. From all the info that I've read, the latest version is 1.1.30. I've tried doing a system update from the phone, but it tells me that I am up to date.
View 2 Replies View RelatedThe screen has been cracked recently, so my brother took it upon himself to buy me a Cliq (MB200) from someone off CraigsList for my birthday. I am not sure if this is the route I would had gone but it's not like he can take it back now. Luckily it is a Cliq with a T-Mobile emblem on it, which is my carrier, so there shouldnt be any problems. And it appears to be in excellent condition.OK, time to transfer the SIM card.First, we cannot get the newly purchased Cliq to recgognize my SIM card. It is an old T-Mo SIM card that has been transferred from A Samsung T-719 purchased in 2007 to a BB Pearl to a BB Curve and then to the Cliq2 bought in 2011. I do have newer SIM cards that have never been opened or activated, so that could be an option. But the SIM works fine in my Cliq2. But in the newly purchased Cliq we immediately get the "Please insert SIM card" message on the screen.Yes, we did do a factory reset and then re-tested the SIM.Wi-Fi works.We were curious if the SIM Card can't be read until we go through the Motoblur registration.Also, can the Motoblur info just be transferred from the Cliq2 to the SIM Card or SD Card so I don't have to login on the newly purchased Cliq?I forgot my Motoblur password and it is registered with an inactive email address, so a password recovery via email is not an option. Should I just open a new Motoblur account? Will it let me connect the same emails and social media accounts as the old Motoblur account?
View 5 Replies View RelatedWhere can I get the 2.3.6.sbf for cliq2 ? My phone software was broken, because I tried to downgrade to froyo.
View 2 Replies View RelatedI bought the defy recently, and it is getting heat after continuous use of more than five minutes. If I play any games or if i am in call for more than 10 minutes or even if I charge the mobile my phone is getting heat.
View 10 Replies View RelatedI will set it in the cradle and it will begin the power up process and turns off several times before the status bar completes its update.At times, I am able to get it turned and it will work as intended but after a while it says that the battery is critically low and I need to plug the device in. I have it in the cradle, and the car charger utility plug is plugged in and is displaying a green light indicating power.The MotoNav is acting as if it is not receiving power from the cigarette lighter/utility port.When I undock the MotoNav from the cradle I no longer get the message...that the device is in pedestrian mode and on battery power, do you wish to turn off the device?...the MotoNav just immediately turns off.
View 11 Replies View RelatedI have had my Atrix for about 4 months now, dealing with freezed and random shut-offs. Today, though, my phone has been continuously restarting all day. I just picked my phone up, tried to unlock it, and it immediately popped up with google framework errors, bluetooth errors, and others that go away too fast for me to even see them. After a while, my phone will automatically restart itself, and continues having the same errors.
View 1 Replies View RelatedI own a Cliq 2 and am having a very hard time using the slide bar. This evening I can't even unlock the phone to get back to texts, etc. Very frustrated yet still "have hope". Okay, my daughter unlocked my phone just now. Is it that my hands are cold?... (Warm heart of course). Truly, there has to be another way to unlock this phone and/or answer calls when it's tempermental. Sliding the keyboard open doesn't work.
View 1 Replies View Relatedwhen i got my phone phone i set up my motorblur account. like 2 days ago my phone died when i turned it back on the motorblur page came up instead of my home screen. it is telling me to login or register a new account. when i try to log in it is telling me that i already have an acount setup with my phone.
View 15 Replies View RelatedSo i've been at this for two days now and i even went to my local t-mobile store.I've updated my phone via my computer since the wifi broke some time ago. Great, but I still wanted to update my phone.The wifi isn't place specific either. i've tried over 10+ locations with wifi (various friends houses, etc.). The message i get is unable to start wifi. what gives?But, after the update, i need to log into motoblur for my phone to be of any use to me at all. Guess what, the wifi doesn't work and I don't have a data plan.So do i have to pay for a data plan just to get this expensive phone to start working again? don't tell me yes because i know this is a solution. however, i don't have the money for a data plan otherwise i would have one already. and no, i don't have the money to even subscribe to one month just so i can "activate" my phone when i've already paid for all those fees.
I've tried doing a hard reset by holding the camera button and power button while the phone was off, then pressing down on the volume key followed by alt L/W. After the reset, the wifi doesn't work. not that i expected it to.I've checked my warranty. it's up. I find it a little peeving that it happen to run out near the same time the wifi broke.any fixes? Because i don't like to spend $400+ on my paper weights when i can go outside and find a rock.
I bought a phone from someone and cant get any contacts on my phone I have them on my sim card but I keep on getting that message.
View 3 Replies View RelatedI'm having trouble deleting telnav gps from my cliq 2. I'm removing it because I use google maps, which is free and in my opinon much better. The problem I have is when I go to Settings>>manage remove apps>> and go to telnav the options to force stop and uninstall tabs are 'not selectable'. The only executable tab was clear cache..(which I did).
Furthermore it takes up 3.39 mbs that I could use elsewhere. I called tmobile to cancel the service and they did, but I can't remove the pesky app, because its still there each time I pull up my list of apps?
I called T-Mobile, they don't have any, I looked on the Moto store here, they don't list the cliq when looking for Accessories -> phone (the drop down does not have the cliq) so where would people in this forum look for a new battery for the cliq (Yes I still have and use the cliq, I love it, if I need a new feature I can eather just download it from the market or code it up myself)
View 2 Replies View Relatedeverytime i turn the phone on, the wallpaper loads and non of the icons or anything else loads and i get this error "Sorry! The application Home (process com.motorola.home) has stopped unexpectedly. Please try again."after i click foreclose, a couple seconds later the same message comes up over and over again. the lock screen still works, the top bar still pulls down, the apps that start at boot still work and i can still access some of my messages when i pull down the drop box.if i get into an app it works fine untill i click home or back and i keep getting this error message not allowing me to use my phone. havent installed anything new recently.
View 4 Replies View RelatedI would like to know how to do copy and paste in CLIQ ? User manual did not describe very clear and without any diagrams.
View 1 Replies View RelatedWhen your battery is low your phone flashes a red light. However, my Motorola Cliq 2 has a solid red light that will not shut off. I have a full charge on my battery and no notifications pending. I did go into settings to try and change the notification led but nothing is working. I've noticed that the red light will not shut off when powering down the phone. After removing the battery the red light will go away but as soon as the battery is back in the phone the light appears again..even when the phone is off. I have tried to place a battery from another device but the light still appears with the other battery as well.
View 1 Replies View RelatedI have a CLIQ XT unlocked that I am using on ATT Network. I disabled the ATT data connection. My wife uses it as a phone as well as with wifi. Phone is sometimes slow or freezes. Is there an update I can download to correct this?
View 4 Replies View RelatedAbout 10hours ago my phone shut itself down and when I restarted it I had a "zero" for signal. This hasn't changed at all. And several reboots and even popping the battery a few times hasn't helped.
View 3 Replies View Relatedok so only apps i have installed since i got it was Angry birds google + and dolphin browser and Y5 battery saver. but yet i only have 67 MB free what??? this phone has 283MB used what is using this? how do i fix it i cant even install go launcher EX? someone hep me here what gives how do i fix this i want this space or at least part of it so i can put go launcher EX on here i tried and it gave me low memory so i want to know what the heck is using all this and what can i do about it.
View 6 Replies View RelatedI have a motorola cliq with motoblur and i would like to know if it's possible to switch firmware from version eclair 2.1 to froyo 2.2. My wife has another android phone that has froyo 2.2 and her phone is faster eventhough her phone hardward has less to offer than my motorola cliq with motoblur.
View 3 Replies View RelatedI would like to start off by saying that I DO like my Cliq.I noticed problems with my News Widget.It would stop updating.I tried taking the battery out, etc.After some searching, I realized I wasn't running the most updated software.So, after some challenges with the update, I finally got my phone updated.That was followed by a total reset. Not happy about that, but seemed the only way to go in order to work out some kinks with the upgrade.So now I am trying to reset all of my personalizations. Now this is where my most recent problems are.How do I set ringtones for my contacts? Each way I have tried only lets me choose from the defaults or factory installed tones.
View 2 Replies View RelatedI am using Motoblur Cliq XT unlock phone from T-Mobile, while I am with T-Mobile I have 3G service on my phone after some time i removed data plan and using only voice plan. Recently I moved to AT&T Carrier and get into two major problems.1 . Very frequently I used to get this message "122 Error Invalid Number. Please resend using a valid 10 digit mobile number 06050407100000535441545553"2. For new carrier I have 3G data plan, but mobile network is using Edge service instead of 3G. I check at my area 3G service for AT&T is working fine. If I use my sim in another phone I Can get 3G service.
View 2 Replies View RelatedI was a part of the testing group and could not get my phone updated through that. Now it is officially out and yet again, I cannot update my phone. Here is the problem once again: I plug my phone into my computer and start Motorola Software Update, which is up to date. It says it is going to update the software on my phone. My phone turns off and a screen comes up on my phone saying it is updating the software. A few seconds later it says the update is complete, and my phone reboots exactly the same. I have tried to update my phone like 8-10 times on different computers, etc. and nothing changes.
View 15 Replies View RelatedI need more ROM. I barely have any apps installed. My music and SD card capable apps are on my SD
View 5 Replies View Related