Motorola Atrix :: Keyboard Connects But The Mouse Will Not Connect?
Jun 17, 2011The keyboard connects without problems but the mouse will not connect. But at other times it does.
View 15 RepliesThe keyboard connects without problems but the mouse will not connect. But at other times it does.
View 15 RepliesThe first time I tried it out it worked fine and now my Atrix is paired with the mouse, but now the mouse will continue to flash blue (which I belive means that it is searching for a device?) but will not connect.
Any advice what might be wrong?
Ok.. Before I say I give up and my phone and the docking station were a bad purchase, let me ask for some help here, since the forum seems to be pretty helpful. And help me with establishing the initial connection with my webtop dock.
I got my Motorola Atrix and the webtop docking station at August (2011).After finally succeeding to connect it all together - phone-keyboard-mouse-docking_station, I was quite happy every time I connected it and it worked properly.
I have the Motorola keyboard and MS 5000 BT mouse. They each work well individually, however when used together, the keyboard frequently disconnects. When I go to a text field, the software/screen keyboard comes up instead of using the hardware keyboard. If hit a few keys on the hardware keyboard, then it seems to reconnect and I can continue using it. It disconnects again once I leave a text field. I'm using a 3G version of the Xoom, but without 3G activated, so just using WiFi.
View 1 Replies View RelatedI've noticed my atrix is connecting to the internet by its self alot and as a result using my download allowance.
View 3 Replies View RelatedI had a problem with my wi-fi (said "error" or rebooted everytime I tried to turn the wifi on), so I copied all my crap to my pc, and did a factory reset.Now my phone just reboots every few minutes.so I grabbed an image to go back to factory, and used RSD lite to flash it.
View 2 Replies View RelatedMight SII be waiting for passcode? But no opportunity to enter. Motorola btooth keyboard (part of same brand new boxed set as mouse) works fine. Mouse works fine with other devices.
View 3 Replies View RelatedCan bluetooth speakers and a bluetooth mouse not be used simultaneously? If I have music streaming to the bluetooth speakers, once I move the mouse the music stops until I'm finished moving the mouse and then starts playing again.
View 4 Replies View RelatedCan I use iphone 4 as a keyboard and mouse for a mini mac desktop
Info:
iPhone 4, iOS 4
One of the most desired features of this N8 phone for me was the ability to use bt keyboard and mouse. Now I bought the keyboard and mouse and what happened, nothing.Both devices are found when searching bt -devices. Keyboard doesn't even go to the pairing, it halts to password questions (where I type 0000). Then message:" Keyboard cannot be connected).With mouse, I can get one step further. When prompting password, I type 0000, the mouse gets paired, but when I try to connect, message comes:" Bluetooth connection cannot be created". Or similar cause the message is in finnish language. But I think you got the point. Items I have purchased are:
- Microsoft Bluetooth Notebook Mouse 5000
- Microsoft Bluetooth Mobile Keyboard 6000
I tried to search but couldn't really find what I was looking for.With my HTC Touch I had a program on the phone for when I plugged it into my computer (USB) I would be able to control the phone with my keyboard and mouse.Is there anything similar with the iPhone?
I know about veency, but I am looking for an app (jailbroken or not) where I can plug the phone into the computer and NOT have to install any new programs on the computer.Everything I have found either talks about veency, or a program you can download to get this to work.
I want to connect mouse with Xperia Pro using USB OTG cable (without use of LiveDoc). Is it possible?
View 5 Replies View RelatedJust a suggestions for Moto, auto-correct should not automatically correct proper nouns. It is impossible to have every name in any database, so if I capitalize a word, it should just leave it alone. I have typed so many things on fb and elsewhere only to see a name of a person or place coming up something ridiculous after I put it up.
View 3 Replies View RelatedI use custom keyboards on my Atrix like the Gingerbread and Iphone keyboard.
As I go to the keyboard setting and set this custom keyboard as the default one, the phone has been working perfectly poping up whatever custom keyboard I defaulted for couple weeks until yesterday... the phone keep going back to the default Multi touch keyboard and won't remember the selected default keyboard for some reason..
The second Atrix in our house is having strange keyboard behavior. Has been fine all day until about an hour ago.
View 14 Replies View RelatedHas anyone else had a problem with their Atrix while texting where the phone (or keyboard) adds a different letter arbitrarily while typing. In my case my phone adds the letter "Q" however its in lower case. I have removed battery and restarted multiple times. No better.
View 11 Replies View RelatedMy lapdock lapdock keyboard goes weird. The d escape key, control key, and several other keys that seem to be involved in the F5 key combination go dead.I have learned to trick it. I do FN-F5 and hit escape and keep hitting the combinations until escape works, then hit control-alt-d which seems to clear the issue.Is there anything I can do to stop it from going into this crazy mode.
View 3 Replies View RelatedMy atrix works with the hd dock and saitek backlit usb keyboard fine. I also have a gigabyte bluetooth mouse thats works with the ocassional dropout. The problem is I just got a motorola bluetooth keyboard with trackpad and it doesn't work in webtop mode. The mouse portion of the keyboard works sometimes and then drops out, but I can't type anything. The caps lock light will not even come on. When I undock the phone the keyboard will work and then disconnects randomly. I was wondering if anyone else has experienced this problem. Hopefully this will be fixed with a software update.
View 1 Replies View RelatedI read that the update would "improve the keyboard functionality". Well I updated this morning and my keyboard no longer vibrates when I touch a key, or if it does it is barely noticeable. Is this intentional? Was a setting changed/re-set due to the update? Is there a way to control the amount of vibration when you push a letter? I am missing the space bar constantly because it doesn't vibrate.
View 2 Replies View RelatedI'm having a problem with my multi-touch keyboard it wont change language when i chose English and Other language it only display English languge when i slide the space bar to another language it still English letters Swipe keyboard working good tho , I didnt have this problem when i first got my Atrix whats wrong
View 4 Replies View RelatedFrom the documentation the Razr is supposed to support USB Host out of the box and allow connectivity of USB devices that do not require special drivers.Specifically mentioned were USB keyboards - which is the sole reason I purchsed the Razr over the Galaxy. I have a standard USB to micro USB adapter that I've used to connect to the phone. However, the input is not recognized.How do I go about connecting a USB keyboard to the Razr so that the input is recognized
View 1 Replies View RelatedN8 wlan connects automatically whenever i connect charger?
View 1 Replies View RelatedWhen going to a baseball game my phone loses it's signal, however, the Diamondbacks offer AT&T hotspots throughout the building. I have AT&T service so you would think this is a no brainer, my son who has Sprint gets on with no problem, my husband with Verizon has no problem, (both have Android phones), my daughter with A&T service and an iPhone has no problems, however when I go on, it searches for awhile and then I get the following error message and it shuts off my wifi
AT&T Wi-FI Hot Spot Status Unable to confirm eligibility, please call Customer ---and then it fades away, if you click on the error message it completely disappears and there is no phone number to call. This is my second phone because of this issue and it isn't fixed. I would like to be able to use my phone to use MLB at the Ballpark but it's like taking a brick to the ballpark.
I can't seem to connect my new Atrix 2 to my Macbook Pro at all.. not even through USB. I am not able to receive an item nor am I able to connect successfully through USB. At first, I just connected my phone through USB and it popped up to install a link but it was only an ".exe" file. I than downloaded Motorola Media Link and there is no connection link. I am on a Macbook Pro 10.6.8 and I have searched through the forum as well but nothing really specific on my issue. I have restarted my Mac and my Atrix 2 but to no avail.
View 2 Replies View RelatedSince I updated to the Gingerbread operating system the phone does not recognize the USB to charge and the pc is telling me that it cannot recognize the device either. I have tried to update drivers, but that has not worked.
After the battery died, the phone would flash on the Motoblur screen for a few seconds. Eventually (after more than 12 hours of the flashing on and off screen) it did charge up, but I don't know how to keep it charged and I cannot connect or sync with the computer. It is not the cable, as I have the same issue with the car charger connected.
I was able to do a External Reset, but it still has the same issue. AT&T doesn't know anything about it and has offered no solution. What should I do? Everything was working fine before the update. Is there any way to restore the old operating system?
Any recommendations for a mouse to use with the Xoom?
View 1 Replies View RelatedI can't seem to get my phone to communicate with Moto Cast USB. I use Zumocast for wireless, but I wanted to use Moto Cast to sync my music and videos over USB. When I plug the USB in everything starts up automatically. A screen pops up and tells me its preparing my device, then another screen pops up telling me to wait while it loads content. However, this second screen has a large yellow triangle with an exclamation in it and lists things to try if you are having connection issues. I have tried every USB option I have on the phone, it seems to force the connection back to USB mass storage, so I assume that is where it needs to be.
View 3 Replies View RelatedJust purchased Atrix 2 and I cannot connect to internet using wifi. It scans, connects and immediately disconnects.I have followed the instruction re: forget and reconnect. I have my passwords correct. I have a tablet and iphone that connects to the Netgear N600 without any issues.
View 2 Replies View RelatedI've had my Atrix for a couple of months now and I noticed this problem back within the first 30 days but thought it was an issue with our network at work..ie the wrong password. After getting our tech guys to set the right password I have tried to connect to the WiFi at work but it gets to the point of obtaining an IP address and disconnects. I know the password is right because my co workers newish laptop will connect and another coworkers Iphone 3GS will connect.
My Atrix will connect at home, Applebees guest and the local hospitals guest connection. The work connection is secured with WPA/WPA2 PSK according to my phone. It's a small work place and really the only person that would every use the connection would be me and honestly I'm a little peeved that I can't get it to connect. The routers are probably about 3 years old so I'm not sure what that would have on them but they should work just fine with this phone. I can't really log into the routers and change anything there because of some other things that are networked into the system. Are there any setting I can change in my phone that might force it to work?
When I got my Atrix 2 days ago, I brought it home and connected to my home wifi with no problem. Downoaded the 1st of 2 updates/upgrades and after installing it, I was no longer able to connect to it. "Obtaining IP address" was all it displayed until disabling it and connecting to one of my neighbour's unsecured, poor signal, on and off connection.I've tried the tech people at Bell Mobiity and even my internet provider and they are clueless.Everything else in the house connects without issue, including my old blackberry bold 9000, xbox, 3 laptops, tv, etc. Just not my Atrix.I've rebooted the router several times, renewed WAN settings, switched to static ip. I've also pulled the battery for 2+ minutes, rebooted the phone, told it to forget, then re-entered the password to try to reconnect. Nothing.I also don't have any issue connecting to other wifi networks. Just the one in my house.
View 1 Replies View RelatedI purchased a Atrix2 sometime back but just recently was looking to connect it to my PC to download some stuff onto the phone.When I connect my phone to the PC (windows 7 64 bit), the PC is not able to install the required drivers for my motorola phone. It fails with an error that says failed to install something called "ADB" drivers. I've tried installing the drivers from the page below to no effect :http://www.motorola.com/Support/US-EN/SupportHomepage/Software_and_Drivers/USB-and-PC-Charging-DriversAlso if I put my phone in the "Charge only" mode, on the phone I see the "lighting" icon continously coming and going on the battery icon in the notification bar at the top of the phone.
View 12 Replies View Related