Can I change any of the four app launch options on the initial unlock screen? I rarely use the camera, but there is another app I would like to be able to open quickly.
View 1 RepliesI bought an Atrix 4g running Gingerbread this last Saturday (8/20/11). Over a day, it probably would freeze up 10 times. It would only freeze up when the display is off. When I go to hit the power button, the display wouldn't come up. The only way to restart it would be to pull the battery.
I read on this forum and some others that some apps could cause problems so I removed all downloaded apps (factory reset) but the problem persisted. I switched for a new Atrix from ATT and the same thing would happen. At this point I can't believe I got two bad phones from AT&T, so I feel like it must be something I have setup. The guys at the AT&T store said it could have to do with my exchange email I have setup for my work email. I configured it to not sync automatically and only manually. The problem would still persist.
I recently updated my Motorola Atrix 2 to the new 4.0.4 OS. Previously, I had my phone set up so that I had to enter a pin # if my phone had been asleep for 30 minutes or more. Otherwise, if less than 30 minutes, turning the phone on (from sleep) went directly to the home screen (no swiping or unlock needed). Under the new OS, I cannot seem to keep this. Now, there is a 2-step unlock process (selecting key icon, and then unlock option -- lock icon -- in order to get to main screen). The only way to avoid this annoying 2-step process (that doesn't really add any security) is to turn off all locks, but I would prefer to have some security (i.e. through pin lock after 30 minutes asleep). Anyway to disable this annoying 2-step/swype feature when turning on phone without disabling all locks? If not, is there anyway to go back to my previous OS?
View 3 Replies View RelatedSince the latest update, system version 4.5.91 android version 2.3.4, Bluetooth voice commands will no longer unlock the screen. Therefore, voice commands will not work until you manually unlock the screen. This is a recipe for disaster when using in the car! I've found several other complaints like this, but have found no solutions from Motorola. Under location and security settings I have enabled Allow Bluetooth Bypass, however this has no effect. I have turned phone off and back on. I have disconnected Bluetooth devices and reconnected, but problem still exists. The whole point of having Bluetooth in the car is the ability to make phone calls without reaching for or looking at the phone for increased safety.
View 6 Replies View RelatedBasically the camera won't initialize to unlock the screen. I have to hit emergency call, then the PIN screen appears, then the emergency dialer appears, and I have to hit "back" and the PIN screen appears again. While the screen is black tapping on anything doesn't work except the silent slider. I have the button press developer option enabled for anyone who wonders why the dots are there. The face unlock had been working fine for several days.
View 8 Replies View RelatedBut now I can't disable vibration when I unlock the screen. The phone produces short tremors either when sliding the unlock slider or after successful fingerprint authentication.
Now, there is an option in Settings -> Location & Security -> Use tactile feedback. It only works partially. It enabled fingerprint authentication produces one short and one long vibration. When disable it is down to one short vibration. I am curious is this a bug or a feature?
I have a Pattern Setup as my lock screen for my phone, and 2 out of the 3 times I try to unlock it, it doesn't work. I try to drag the pattern out, but it thinks i lifted my finger and the lines go red, like when you guess the wrong pattern, and the lines go crazy, shooting to random dots on the lock screen, making it very tempremental. When this occurs i just click the lock button to shut the screen off, and then try again. Even after I do this, it still won't work and the lock screen will go crazy.
View 3 Replies View RelatedMy Atrix 2, v ICS had the screen locked into 'emergancy calls only' mode, and won't unlock. I did a hot boot, cold boot, reboot, called att tech support, no luck. Haven't done a factory or master reset, and don't want to if not needed. Will accept inbound calls, but can't open anything, and MotoCast can't find the phone, Motophone tools not for this phone OS.
View 4 Replies View RelatedI have the 8 digit network unlock code for my Atrix2, but when new carrier sim card is inserted it doesn't say sim not provisioned, and doesn't provide text box to enter code.Instead it gives me phone and text service but not mms enternet
View 1 Replies View RelatedI was searching for topics related to this topic, describing the diference beetwen manufacture unlock vs bootloader unlock. I bought an unlocked Atrix in AT&T, so I could use it at any company or overseas. Is this mean the bootloader is also unlocked? Or these are diferent things?
View 2 Replies View RelatedI have purchased an ATRIX 4G on AT&T network. I travel frequently outside USA and would want to use this smart phone on other countries service provider's network. How do I Unlock my Phone?
View 5 Replies View RelatedI bought a Atrix 2 from Moto online shop without subsidy, it's locked to AT&T network. I'm planning a long trip abroad, and would like to unlock the phone to use other carriers SIM card. But where can I get the unlock code or how to unlock the phone?
View 6 Replies View RelatedIf Moto does not unlock the bootloader shortly for my Atrix I will be selling the phone and moving to a Samsung Galaxy S II as soon as it's available. Moto, provide a date as to when you will provide an unlocked bootloader. I know this is a hot topic, but if you can not keep up with Development then allow me as the owner of the phone to do as I wish. Take samsungs lead and send your phones to CyanogenMod
View 9 Replies View RelatedI purchased this MB886 from AT&T but never activated it with them. I went with Consumer Cellular since they do not have a contract requirement. My Sim card from Consumer Cellular worked with the phone but no other carrier Sim card will since it is locked. AT&T does not have the code to unlock this phone since I did not activate it with them. Motorola still has the code and they will not give it to me.
View 3 Replies View Relatedhaving issues with the fingerprint scanner after upgrading to 4.1.83? I was on 4.1.57, and did the upgrade to 4.1.83 yesterday.This has happened a 3 or 4 times now, where it will no longer register attempted fingerprint scans and I have to unlock with the swipe + numeric code fallback option. It just displays "Swipe finger sensor.", and no matter how many times I swipe my finger, it continues to display that message. I don't get a "Swipe was too fast" or "Finger did not verify...". It seems to just stop working.If I reboot the phone, it works again, until after a while it just randomly stops working again. I have a workaround, but I was curious if anyone else was seeing this behavior after a 4.1.83 upgrade. I found it strange, because the update doesn't mention anything about the fingerprint scanner, but of course that doesn't mean they didn't tweak something with that module.
View 15 Replies View RelatedI have an AT&T GoPhone account. When the phone boots up with an AT&T SIM card installed, it goes to the "SIM Network Unlock Pin" request screen. I have worked with both Motorola and AT&T tech support personnel for many, many hours to get my Atrix to accept the unlock code I have been given from AT&T (22314992). The Atrix response is always "Network unlock pin unsuccessful". The phone otherwise works beautifully after a fastboot coldboot (wi-fi, program installs & usage, etc). But one simple problem...I can not make phone calls.
View 3 Replies View Related recently purchased a Motorola Atrix 2 from the Mot Corporate store here in the US. It works well with AT&T SIM but I wanted to unlock it for using an international SIM when traveling outside. I got the unlock code from AT&T but the phone didn't accept the code. I tried the code twice and both times, I got this message "Network Unlock Request Unsuccessful". I have confirmed the IMEI by using *#06# and matching it with the number on the back sticker. I checked with AT&T again and they said that Mot said that the original code provided is the right one for my phone.
So, I am stuck now. I don't know what I can do about this phone. I would really love to be able to use it outside the US and that was one of the reasons I paid an unsubsized price for it.Anyone else facing similar problems with the Atrix 2? Is there a software update that can fix this issue? I don't want to try the same code more times because I am afraid that it will hard lock.
HTC has just announced that from now on, all of their devices will have unlocked bootloaders... will Moto follow suit?
View 5 Replies View RelatedI cannot access my camera from the initial screen. Instead my screen jumps up slightly and then returns to the original position.
Info:
iPhone 4S, iOS 5.1
I bought a locked Atrix by amazon market place end after I bought the unlock code. When I try to unlock is displayed the message "network unlock request unsuccessfull". i'm informin a 8 digits code.
View 2 Replies View RelatedI bought an E6-00 just one and a half month ago. Although its operating system kept restarting itself since the first time I bought, I did not care much about that as the phone was running ok after restarting itself. However, it finally gave a disk error yesterday and stuck in its main desktop screen. Then I turned the device off and when I turned it on again, it is stuck in the initial white screen where a Nokia logo was supposed to appear. Nothing happens then; the white screen persists until the battery is empty.
View 2 Replies View RelatedWhen logging to iTunes to download updates I am presented with an appleid that is not correct. If I cancel after trying to use the incorrect Id the login screen finally displays the correct appleid. How can I get the correct applied to appear on the initial login screen?
Info:
iPhone 4S, iOS 5.1
THE STRING "fastboot oem get_unlock_data" DOES NOT RETURN ANY DEVICE ID. WHY?The bootloader on Motorola devices released before August 2012 is not unlockable. This fastboot command will not return a device ID or unlock data for these Motorola devices. At this point, only the devices on our Supported Devices list are eligible for the unlockable bootloader program.HOW DO I TELL IF MY DEVICE HAS AN UNLOCKABLE/RE-LOCKABLE BOOTLOADER?This depends on a few factors. First is whether the device ships with a bootloader that is capable of being unlocked or re-locked. Second is whether the wireless carrier that sells the device allows the bootloader to be unlocked, as each of our operator partners has their own policy. As new devices are released, please check the bootloader introduction page. You will be able to check whether your device shipped with an unlockable bootloader. We will be adding devices to this list regularly.As of August 2012, the only Motorola devices which can be unlocked are:
Photon Q 4G LTE (Sprint)
RAZR Developer Edition (Europe Only)
XOOM
Now above what I have bolded are my areas of concern. In particular, the second quote:First is whether the device ships with a bootloader that is capable of being unlocked or re-locked.The Motorola Atrix HD has indeed shipped with a bootloader that is capable of being unlocked or re-locked. It supports the exact same commands as the Motorola Photon Q 4G LTE does, the commands of:
fastboot oem unlock
fastboot oem get_unlock_data
fastboot oem lock
This device fits that exact definition. Running a strings.exe runthrough of the bootloader from the Atrix HD shows that it indeed supports these commands, and anyone with this device and the android-sdk can run these commands themselves. The part where the unlocking process is stuck is the Motorola "Unlock My Device" webkit, where the results of "fastboot oem get_unlock_data" were pasted into the box to get the emailed UNIQUE_KEY to put into "fastboot oem unlock [ unlock code ] " as the same process is the Photon Q 4G LTE. The site comes up with this error:As you can see, we can assume the second half of the "few factors" as the faq pointed out:Second is whether the wireless carrier that sells the device allows the bootloader to be unlocked, as each of our operator partners has their own policy.Assuming this, it is then AT&T's decision that the Motorola Atrix HD has a locked bootloader, but the device DOES support unlocking and re-locking, contrary to the first quote in this post from their faq about devices before August 2012 NOT supporting these functions.The bootloader on Motorola devices released before August 2012 is not unlockable.So my question is, will this information be able to get corrected, or is Motorola planning to make an announcement that the Motorola Atrix HD will not be unlocked because of AT&T, but that the hardware and software actually support unlocking and re-locking?
I had activated the screen lock feature for my mobile. I had used fingerprint detection and the password method. I discovered that if the password is entered wrong 5 times, the phone erases all the data on the phone as well as the memory card. I want to disable this feature.When the password is entered wrong 5 times. It should just not allow the user to enter password for another 5 minutes.
View 2 Replies View RelatedMy W385 went through a rough patch. Anyway, I flashed the firmware to it (it was displaying "init usb_bootloader" prior to the flash). Now it displays "needs initial programming" after it boots. My local Verizon "Store" said it could not be restored.
View 3 Replies View RelatedI tap "ok" and the message comes back again. The strange thing is that the message is in spanish (I have my phone in English and that the lockscreen photo has dissapeared and the xperia theme is there now.
It seems like the phone is working ok in the background, but I cannot access the homescreen.
I can take screenshots, change the volume, etc. and as I could access the phone's internal and sdcard I made all the backups as possible.
I have a stock Xoom wifi and have had it since day 1. Until the 3.2 a couple months back it worked fine... well as good as the subpar tegra2 will allow it anyway. Since the update I get regular wifi dropouts. Sometimes it happens when using the browser. I'll get a pop up that says it can't connect to the server or something like that. It isn't a regular interval. It will go 5 minutes, 30 minutes, 2 minutes, whatever. But I'm used to seeing it.
It is really evident when I try to play media via dlna from my linux server. Whether it's a HD or SD file media will stop playing using any media player (Dice, rockplayer) or any dlna client software (Upnp, BubbleUpnp, Twonky). Sometimes it happens after 30 seconds, sometimes after 5-10 seconds, other times right away. But it never makes it past a few minutes.
My router is a linksys wrt610n running dd-wrt and using both 5ghz (channel 48, n-only) and 2.4ghz bands with WPA2-AES. I've run enough test to prove it isn't the router. For my latest test I started playing an episode of the muppets show ( ) on the xoom connected on the 5ghz channel and my droid X on the 2.4 ghz channel. The xoom drops out of playing after a minutes, my X keeps playing. I switch the xoom to 2.4ghz and play the episode again. The xoom drops out again after 30 seconds. X is still going. I go upstairs and work out while watching the rest of the episode fine on my X.
While I'm streaming media I watched bandwidth monitors on the router. The droid X looks very stable with the connection rate around the same Mbps as the video file. The xoom looks like a slasher movie. It spikes to a real high rate (20mbps-ish) 2-4 times the file's rate, then it drops to about 0. It quickly spikes to about double the file's bit rate and then drops back to just above 0 again. It keeps this up until it finally just stops.
I did a device reset on saturday and all it did was annoy me as I had to re-setup everything again. The straw that finally got me was I need the device to develop an app that uses my LAN constantly and I can't since the connection isn't stable.
To summarize. Every wifi device on my network works fine (laptop, 2 droid X phones, and a printer) and my Xoom worked fine right up until I received the 3.2 update. Now it barely works.
I was on Verizon with a Droid 2 when you did the 2.3.3 test a couple of weeks ago. On 10/9/2011 I moved to Sprint and bought a Photon 4G. I just updated my HEX MEID in this forum profile. My phone did the initial reboot but came back with Update Failed.Update Motorola Software says. An Update is currently being downloaded. You will be notified when the download is complete. There is no indication anything is happening. It's been this way for close to an hour now.
View 15 Replies View RelatedI have the Atrix for many months now and only witnessed a few small bugs. However my wife bought the Atrix2 and she says the screen shuts off on her when the she touches the screen. It is not a timeout setting either. It is REALLY bad when we are laying in bed and she holds the phone and i try to touch the screen...boom screen shuts off! She turns it on and i touch the screen...boom the screen turns off again. Is this some kind of security setting?
View 9 Replies View RelatedI have this weird thing going on with my Atrix. I've had it for about six months and it was fine until now. What happens is that the touchscreen stops responding after it is turned off (pressing the power button) and back on. I can't unlock the phone, but the volume buttons are still responsive and I can still turn off the screen. If i reboot it (by removing the battery), it boots up just fine, with the screen working perfectly. It'll sometimes stop working when ending a call. The weird thing is that it doesn't happen everytime I turn off the screen, and when it happens, if I turn it off and back on it sometimes starts working again. It also seems to happen more frequently when the battery is low.
View 1 Replies View RelatedWhen I use face unlock, or pattern unlock, when the phone gors to slee, and I press the power button I just get a black screen where the pattern unlock or face unlock feature should. The the only way to unlock the phone is to keep the power button press as is Im about to turn the phone off, and then cancel....then I get get the pattern unlock screen.
View 1 Replies View Related