today i notice that in the upper right corner of my atrix 2 , in that part where the proximity or light sensor is located , there is a faint red light dot, and no... it is not the notification led.
View 2 RepliesI've just bought a 5230 and I'm really annoyed that I don't have the functionality my E51 had where if it was really dark the screen would dim down. This is an important thing to me since I tend to read at night and I dislike having to go all the way to settings and so on.
Do you know any piece of software that could change screen brightness based on the light sensor readings?I'm just amazed the phone software doesn't do that on its own but hey s60v5 is worse than s60v3...
I having the problem after update my X10 to android 2.1. I found that my screen light sensor (which actually works b4 under different environment lighting) and the LED notification light (it works b4 while I got the missed call or sms) do not work after update to android 2.1... One more is, the screen color gradation seem worst that b4...is it normal?
View 8 Replies View Relatedafter i installed gingerbread for my phone, the light sensor seems to be acting funny. it will light up the soft keys and my keyboard in low light conditions, but once it is pitch black the keys will not light up at all.
View 12 Replies View RelatedIf you have read my posts you know that I am now on Bionic #3. Unfortunately this one has issues as well. One of those issues is the proximity sensor doesn't work correctly. It will work for a little while and then a reboot is required to make it work again. If you don't know what the proximity sensor is, it is a sensor at the top of the phone that detects when you have the phone near your face. It will cut the screen on/off so that your face doesn't hit the keypad. It is very annoying and almost impossible to make phone calls with this sensor messed up.
View 6 Replies View Relatedi'm having is that although the light sensor seems to be functioning according to various sensor tests, brightness isn't automatically adjusting and the "in-pocket protection" thing isn't turning the phone off when I stick it in my pocket.
View 15 Replies View Relatedever since new update on ATRIX 4g I noticed that led light wont come on after charging the phone and being 100% charge anyone else having this problem, there anything I can do for having this back on my phone.
View 3 Replies View RelatedReading on another forum that the Atrix 2 does not have a notification LED.
View 15 Replies View RelatedI was wondering if there is a way to turn off the low battery red blinking light? uncheck notification doesn't do the trick for the low battery. optimally I would like to keep the blinking light for the e-mail...etc, and turn off for the low battery.
View 1 Replies View RelatedI have two Atrix 2 phones. Both have received the ICS push from AT&T. Neither are rooted, and the download was without incident.
On one of the phones, the led notification does not work when emails are received. On the other phone, the led notification works fine.
I see no way to turn it on or off in system settings.
I made a mistake, well now it feels like a mistake, of installing light flow led controller on my Atrix 2 and it was a complete fail. So I uninstalled the app and now the LED notification light does not blink when it is in screen off mode. It blinks twice when you lock it, then the notifications stop. HELP! How do I reset the green notification flash?
View 8 Replies View RelatedToday I picked up my phone and tried to press the wake/power on button. Nothing happened. The green LED is on and solid, the screen is black (sleeping) and it refuses to wake up. The phone did not get wet, I did not drug it, it did not do some heavy exercises, it was sitting on the table, it is not tired. So, what am I supposed to do now? How do I wake it up?
View 11 Replies View Relatedi having c6-01 past one year. during call.phone don't the proximity to lock the scree.another is breathing light problem..
View 1 Replies View RelatedI had a bit of an accident with my iPhone about 8 weeks ago, some tool spilt their drink down my leg, which got liquid into the docking port of the phone (sensor has been tripped) The backlight died and the phone wouldn't play sound out loud, although if it was rang it was fine (??) I left it switched off and the next day it started to function normally again.couple of weeks later and the backlight has died again, this time for good. i've tried resets etc, and it looks as if it needs a hardware repair, an LCD screen one would assume. The phone has been opened by a 3rd party, and they quoted a £110 repair, so i've decided i'm going to buy the part and fix it myself.
Will replacing the LCD solve the problem, as i have read of occasions where this has not fixed a backlight problem?Any ideas on where I can get the cheapest deal on a replacement 3GS LCD screen?Could this be a problem thats related to something other than LCD?
is it possible to disable the light sensor on the Mini ? even though I have the display brightness set to maximum it still dims when the light level is low, this makes the screen flicker, it's really annoying
View 5 Replies View RelatedI've been having issues with my BB9900 for the past few months. It seems whenever I come under direct sunlight the sensor automatically drops the backlight. I can still barely make out the screen however I have to cover the sensor to get the backlight to come back on. It has become quite an annoyance as I find I can't use my phone outside during the day anymore.I have my backlight set at 10 currently with automatic on. I have tried to turn it to 100 and turn off automatic however that didn't resolve my issue.
View 2 Replies View RelatedHello guys, i am using C901 with light sensor turned off patch:
;C901 SW-R1GA028
;Turn off the light sensor
;v. 1
;(c) IronMaster
;(p) Xamid
;pAtChFiLe=/boot/phone_app.cxc
14140540: 0088 FF20
But the problem is that the keypad backlight is VERY dim (almost off) all the time with it. I tried to modify it a bit and used the value 0008. The result is that the light sensor is off, keypad backlight is turned on but at the cost of screen brightness which is low even at 100% brightness.So can anyone give an optimal value for this patch which turns off light sensor, turns on keypad backlight and keeps screen brightness to max (more or less)?Thanks [ This Message was edited by: killerPK on 2010-08-21 23:49 ]T610 > K700 > K750 > W810 > K800 > K810 > KU990 > K850 > U600 > KF750 > 6120C > G800 > C905 > N82 > 1202 > 6220 > Satio > C901
I run the diagnostic test on my device after the update and light sensor failed.it worked normally with kit Kat 4.4.4! Another bug?
View 10 Replies View RelatedIt is very annoying I want to know how do you turn it off(disable)I just bought it 2 days ago and very sad about this problem
View 3 Replies View RelatedI want to know if there is a way to disable the automatic ambient light detection which adjusts the screen brightness according to the environment you are in.I use the Nokia 700 with Symbian Belle, and I cannot see an option to disable it. Most devices with the sensor can disable it. Android of course, but even Apple device can! This is blasphemy! Apple having greater customisability than Nokia?
View 4 Replies View RelatedWhenever i exit an internet application the internet icon is still displayed on top of the screen until i turn phone off. checked running apps and theres nothing there. why is that? how do i activate light sensor on the phone? do i set the brightness at 80%?
View 14 Replies View RelatedMy e5 has strange problem with the light sensor. If the 'Light sensor' slider in the settings is set to the minimum or one position above the minimum and I put the phone under bright light (for example outdoors in sunny days), the display goes completely off. If I cover the light sensor with something or put the phone in lower light, it turns on again. I think it's software problem, but not sure. Does anybody else have similar problem or my e5 has some fault?
View 4 Replies View RelatedI got the Atrix 2 today, The Back lighting on the 4 soft keys on the bottom, settings, home, return and search, the backlighting doesnt always come on.. usually when you touch them or the display screen, they light up bright white.
View 14 Replies View RelatedCould somebody please mod the c901 display driver so that the light sensor is disabled and display brightness can truly be adjusted manually? I know there is a patching alternative,but a modded display driver would be much more convenient.
View 14 Replies View RelatedI am having this Xperia Mini Pro in my family since May 2012. When I purchased, it came with GB, and very soon there after, the update/upgrade to ICS was released. The upgrade was duly installed through the PC Companion.
I had initially noticed that there is no "Automatic" option under Menu → Settings → Display → Brightness. But then, the handset was in use mainly by my wife and I didn't think much about it since she always keeps the brightness at maximum or near there. Recently we swapped handsets and since I'm a heavy user, I looked for the setting to reduce battery usage, but couldn't find it!
I thought there must be some miss/bug in the software. I downloaded "Andro Sensor" from the market and there is no "Ambient Light Sensor" shown by that app! In fact, it says Light sensor not supported - see screen shot below:
Where as in the "White Paper on SK17" found on Sony's website [URL], at page 5, it says "Yes" against "Ambient Light Sensor".
My question is whether the sensor is there in the production version or not? It is there, then it appears the sensor in my handset is not working and needs repair/replacement under warranty?
After the recent update to 4.1.B.0.587, I observe that my display brightness fluctuates randomly, and this happens very often.
My E7 ambient light sensor glows faint red when I try to connect a fring voice call (and the phone stops responding) or when certain apps (pocket lock) for instance is running. is there any issue with my phone? will the "Glow" burn my proximity sensor? is this an indication of any problem with the application. I only istall applications downloaded from OVI store.
View 1 Replies View RelatedIs there a way to have the keyboard backlight work the same as the sreen backlight?
View 3 Replies View RelatedMy iPhone 4's light flashes like a strobe light everytime I get a phone call or text message, how do I turn the light off?
Info:
iPhone 4
I've bought an old galaxy s6 white from someone, background light of the touch keys doesn't light up only "back and multitasking" symbols, it also lights up area around these symbols, I can see it very clearly in the dark. This thing doesn't happen on my brother's S6 gold.Is it normal on S6 white or my S6 has been replaced other glass?
View 1 Replies View RelatedWhen I plugged in my blackberry to the wall charger to charge, the indicator light will light up red for a few seconds then shut off, then it will light up again then shut off, keeps doing this, does this mean it is charging? I left it charging over night and tried to turn it on in the morning but it was still completely dead. Sometimes the charger has problems making a connection, and usually I can see when that is happening from the lightening bolt sign when the phone is on So I'm wondering if it was just because it wasn't making a connection before that it didn't charge and if the red light on and off indicates that it is charging or not?
View 5 Replies View Related1 week ago i walked in the water with my mobile.. Nothing worked anymore. I took my mobile to a telefone store and they have repaired my mobile. Only i've got a steady blue led light and no keyboard light only when i start my blackberry on, the keyboard gives light. If i get other notifications the blue led light still gives light and the red light is blinking that i have something.
View 3 Replies View Related