My phone is registered in HK and there's no update yet... Should i wait or flash a new rom. How to flash a new rom?I'm currently downgraded to WP8.. I don't wanna go back to WP8.1 dev preview as well. I hate the lags.
I read a lot of posts that said it is not possible. But, what if I had a developer account and could unlock it, would that enable me to flash a different regions ROM?
If so, doed hardware in the phone will support the new LTE bands in the LATAM rom?
I was restoring my lumia 1520 with the windows device recovery tool back to version 8.1. After the phone had gone into the flashing mode with the red screen and progress bar, the device recovery tool stopped and I got an error in the log: Flashing failed with error 0x00040010.
I hard reset the phone with the volume down + power button. Now the phone will not turn on at all. No backlight on the screen and no vibration to confirm it is on. The battery was on 90% before it failed.
I have also tried volume down + plug in charger + power and still nothing. I am think that maybe if I open the phone and physically disconnect the battery, this could clear anything that is stopping it.
I am transferring music to my 1520 using "Windows phone app for desktop" but roughly only half of my album art shows up. I know that all my album art is embedded and is there so am not sure why this is happening. My other option would be to use another music player which has the option to add art.
I have three Lumia phones, a 920, a 1020, and a 1520. With each I just attach a USB, copy the camera roll files to my PC. With the first two, I open the video mp4 files on the PC and Windows Media player has no problem. Not so with the 1520, with any video file copied to the PC, it says: "Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file." Again, the same video file plays fine on the 1520 that shot it.On the PC, Quicktime and Movie Maker choke on video files too. I tried a hard reset of the 1520 but it did nothing.
When listening to the Music app on my 1520 (16 GB ATT) and using my headphones, sometimes the volume will randomly get louder then quieter in a rhythmic motion.
It does not go from 0 to 30, its more like 5 up, then 5 down. The actual numbers of the volume stay the same, but I can definitely tell there is an increase and decrease. I've encountered this a few times from different artists (so it is not a style of the artist). Also, it seems to happen whenever the headphones are accidentally pulled out mid-song. After the song is over, the next song seems to be fine. Is there a work around other than waiting for the next song?
I've been pressing the "Check for updates" button frequently in anticipation for Cyan, but suddenly it's not working right. The "Checking for updates..." message will appear, but more than five minutes later, nothing happens. When the lock screen appears and I unlock it, it now says "Your phone is updated" but the "Last checked" date was the date of the last check when things are still ok.
My mom has a 1520 and every time she calls I can barely hear her but she can hear me quite well. Same thing happens when she calls others and they all complain they can hardly hear her. After 5 or 6 secs into the call the volume gets a little louder but not as loud as it should be. She even set it to full level at 10. I asked her to connect a headset/earphones while on the call and that actually worked and the volume was loud and clear but as soon as she unplugs the earphones, the volume drops to a very low level.
I just went to watch a video on my 1520 and the sound won't work. I've tried restarting it multiple times but to no avail. When i push the volume rocker, only the head phone slider appears. I I've plugged head phones in and they don't work either.
Running the latest DP build of WP 8.1 (8.10.12397.895) and, of course, would like to downgrade back to WP 8 so I can get the Cyan update.
Problem is that my phone is not being recognized on any computer I plug it into.
I've tried two Win 8.1 machines, a Win 2K12 and a Win 7. On all of them, I've completely uninstalled all of the Nokia software (three of the four machines had never had the software installed) and then reinstalled both the NSU and NSU for Retail. No go.
I did a reset on my phone. No go.
I removed both the SIM and the SD card. No go.
I've toggled the hidden USB settings on the phone. No go.
I've rebooted the phone upteen times. No go.
The phone is simply not being detected by the desktop OS and is not being installed on the computer.
I've tried everything I can think of to get this to work.
I am a new Lumia 1520 owner and had been using an iPhone prior. On iPhone, I could take a screen shot just by pressing two buttons simultaneously and it would do so. With the Lumia, it seems I can only save a photo that's displaying on my screen. But what if I wanna take a screen shot of a text message conversation.
I recently screwed my phone by placing the phone in window for network coverage during rain. As the rain water spilled over it and few drops got it and brought me some weird issue.
1) Capacitive lights are not working . Only back arrow light didn't work. 2) Mic also not working.
I take it to Nokia care and got it fixed without warranty since it is two year old.And the technician told be that he changed many spare parts and he make use of 1320 spare and got it fixed. And now I feel my phone is getting very hot while charging and warm during normal usage in the top right corner of back side. I don't see heating issue on my other Lumia 1320 and 640 xl
After I press the on/off button or after the screen times out, I've noticed that after some amount of time the phone will have turned back on by itself. I then noticed that it was actually rebooting. I think it may have started doing this after I installed the VLCPlayer app.
I have recently bought a 1520 (a HK variant with GBIE firmware) and on inserting a giffgaff sim I can only access 3g/4g (there is no 4g in my area so it shifts to 2g then back to 3g, 3g signal isn't great).
Any way to enable access to 2g in the settings, if this is going to be changed in denim or if it is best to change the firmware version?
Currently set to RM-937_eu_euro1_231 OS 8.10.14192.280 Firmware 02061.00066.14253.40002
Only charges when plugged in, slow charging notification pops up. No new hardware "ding" sound. No new devices in device manager. No devices with exclamation mark in device manager. No unknown or unrecognized devices in device manager. No devices listed in usb-view
Background : I was on Windows 10 build 10581. Upgraded to 10586. All fine.
Phone showed up and everything. However I wanted to go back to 8.1, so I started up the Windows Device Recovery Tool. It asked for a mandatory update. Updated. It recognized my phone (which was on). Started downloading server side software. I ran out of battery (the laptop), and it shut down. After starting up again, the phone is unrecognizable.
I unintsalled Windows Device Recovery Tool and tried to install again. Error. Several times. Finally after cleaning up everything related to it (RevoUninstaller), I managed to install it again. However, my phone still never is recognized. Uninstalled all Nokia/Microsoft drivers (no luck).
I bought a Lumia 1520.3 from B&H and I cut my sim card down from a micro sim to a nano sim. I know it still works because I put it back in my 920. It says on my 1520.3 says no service in the live tile.
I've recently picked up a 1520 and am now wondering which camera App to use. I haven't taken many pictures in the past but that is likely to change since I will be travelling a lot soon (which admittedly was the main reason to pick up a new device).
I've installed apps on my SD card but when i took the SD card out and open it directly in windows explorer, I cant seem to find any apps in there. I've also turned on my view hidden files in folder option as well.
Took my phone apart to switch cases last night and when I put it all back together it doesn't recognize any touch inputs. I thought I was very careful, didn't pry on anything just let the case splitting tool do its job. The phone powers up and the screen looks fine, but no touch or swipe is recognized.
I bought a 1520 and jammed it in the sim slot. It works fine but has recently periodically beenunreadable. I tried using tweezers, but was unable to remove it. I'm running dp 8.1.
I just upgraded to cyan 8.1 two days ago... Did a fresh install. I downgraded to Windows 8 and then install cyan. I DID NOT backup my apps, instead I just installed each app one by one.
Only problem i have is that if my phone is charged past 89% it turns off by itself and i have to hit the power button to power it up. (It only turns off by itself if i leave it alone... but when i'm using it, it works fine.)