I have been using Tasker for quite some time to handle tweaking audio settings for sleep, work, etc. I have it set to mute all notifications except phone calls and alarms at night. I put my phone on the headboard at night so I have it handy in case of that dreaded late night phone call.However, it still vibrates. When I get a text message or email, it vibrates enough to wake me if I am sleeping light (early in the night, or almost time to get up). It's rather annoying.
I have messed around with Tasker settings, and Vibrate On Notify is not an option for this device for some reason. I have even downloaded a few "turn vibration off" apps, and none of them seem to do what they are supposed to do either.Even if I have to manually adjust some settings before bedtime, I'm ok with that.
I'm finding my GPS settings have a significant impact on my battery life, with High Accuracy draining it too aggressively and Battery Saver Mode not working for navigation or my running app (RunKeeper). Can Tasker be set up to change my GPS settings to High Accuracy when I launch either one of those two apps, then back to Battery Saver when I close them without having rooted my phone?
I can't seem to get tasker to perform any tasks through Secure Settings. Can't get it to toggle air plane mode, change any of the location settings to off, battery saver, high accuracy, etc.
Am I missing something? The 6P is rooted and I know these tasks works because I imported them over from my last phone.
A setting from profiles "Alert for" which is used to vibrate and ring on only particular calls from group. But this setting gives vibrations to all calls no matter from which group the call is.
Firstly, this question has nothing to do with keyboard vibration/feedback. I just want to know how to keep my phone on loud, but turn off the vibration. I can't find a button anywhere to turn off vibrate, apart from putting it on silent...
Edit: yes, the first thing I did was go into the settings and do that, but it doesn't work for texting or whatsapp messages and I don't know how to turn it off for those. I don't mind the vibration when it rings.
I bought a new Nokia Lumia 800. I noticed that despite turning off vibration, the phone vibrates each time the back key (<-) is pressed. Is there any way to turn this off. i believe this could save a lot of battery.Also how do we completely close an application in Lumia 800? I opened a page in IE. pressed back key. Then pressed and held back key to find there is no active application or IE running. However, when i open IE next time, I see the previous page has been loaded and it has been active all this time which could have been eating in to my data usage as well as battery charge.
My BB is on a corporate server and we receive e-mails from around the world at all hours of the night. Does anyone know how to turn off the audible notification of incoming mail, while retaining the settings for incoming calls and texts? I have the Torch 9850.
I bought a HTC M7 (Verizon unlocked) with a broken screen. (stock rom, not modified at all, and with android lollipop). After I replaced the screen, I turned it on and it worked just fine. But after using it for a while I noticed that the notification bar wouldn't come down, so I assumed maybe it was a connection that was giving me that problem and disassembled it again. I checked everything again, made sure everything was in place and reassembly it again.
When I tried to turn it back on, I just got a vibration... and a Black screen. Tried to turn it on again, but again just a vibration and a black screen (not sound at all). I plugged it in my computer and the computer makes the sound that something is plugged in, but the phone does not appear connected (recognized). Also, the charging red light, won't come on. (not even with the charger or connected to my computer)
I've tried: 1) Hold power button + vol/down = just vibration 2) Hold power button + vol/up = just vibration 3) Hold power button + vol/up+down (for about 2 minutes) = just vibrates over and over during that time 4) Previous steps under a bright light. Literally I stepped on a table and did it under a light bulb, and nothing.
I'm quite desperate and sad because it was working great (except for the notification bar), and now it won't turn on... just freaking vibrate..
I left the phone charging during the night and the green light came up in the morning. I tried to turn it On while connected, but the green light disappeared and it vibrated again once...
I bought a Nexus 5 at the weekend and I can't stop it from vibrating when a call or SMS comes in. I have a vibrate off in settings > sound > call and ringtone vibrate and also in Hangout settings but it vibrates anyway.
I've posted screen shots below showing my settings. Regardless of this it's vibrating anyway.
I am using Android 5.0.2 rooted by pingpong. I have G920FD I have a problem because I can't turn on vibration when I am calling. I want to have vibration when I am calling and have connection and when I call off on the end of my call. Where is this option.?
Its strange ... But something happened to my e5 todayit was working fine, I had a call, when I pick it from my pocket it was turned off... I thought the battery is empty "although it wasn't" I tried to turned it on ..But nothing happened just a black screen not even the little vibrate when u turn the phone on.
I tried charging it , tried to take off the sim card and memory nothing worked .
Mechanism to turn off the vibration or mute the message notification automatically during video recording, due to the motor vibration sound always record into the video.
I charge my 5s phone at night, and about halfway through the night my phone starts to vibrate to notify me that it is done charging which is great but it constantly wakes me up as it goes on all night. is there a setting I am missing to turn this off? my wife's 5s does not do this nor does my son's ...
I was at a party and used my phone for a few minutes 4 hours ago and there was no problem. Battery was 78%. After a while I realized my phone was not turning on. After coming back home I connected it to the wall charger and the light is blinking red. When I hold the start button there is a red light constantly but it won't turn on. Holding volume up and start button also doesn't work and there is no vibration. I tried the yellow reset button near the SIM tray and that didn't work either. My phone had a 16 GB built in memory which was pretty used up (It kept telling me transfer to SD card since memory was above 75%). I was going to buy a microSD card for it but now this happened. Is there something I can do to fix my phone?
Is there a way to turn off the vibration/click each time the screen is pressed? Second, where are the sound clips? I've put my memory card from my 5800 and the photos are there but I can't find 'sound clips' anywhere. Usually photos, sound and videos are all in 'gallery' but I can't find that anywhere.
On silent and normal profiles, the vibration stops after around 20 seconds even though the incoming call persists. How do I get the vibration to continue?
So when I just got the phone I set up the Peel remote app and had it working great. After I got all my other apps setup the way I usually do, I found my IR blaster no longer worked no matter which remote app I tired, not even the Peel app which worked at first.
By using another camera, I realized the IR led was not even firing when a remote button was pressed although the notification led would flash the usual blue. After awhile I finally figured out it was tasker causing this. With tasker disabled, the IR blaster worked just like it should but the instant I enabled tasker it would stop working.
I value tasker more than the IR blaster but it would be very ideal if both worked...
So when I just got the phone I set up the Peel remote app and had it working great. After I got all my other apps setup the way I usually do, I found my IR blaster no longer worked no matter which remote app I tired, not even the Peel app which worked at first.
By using another camera, I realized the IR led was not even firing when a remote button was pressed although the notification led would flash the usual blue. After awhile I finally figured out it was tasker causing this. With tasker disabled, the IR blaster worked just like it should but the instant I enabled tasker it would stop working.
