I recently updated to ios 5.1 and can no longer access my home network. It shows up and I am putting in the correct password to join, but I am getting the unable to join network pop up. Last evening I upgraded the firmware on the Cisco router and this morning reset the network settings again on the phone as well as the "all settings" reset. I tried a full restore as well, and still no luck. Also I am now unable to get into iTunes from the phone as well. I know it's not the network due to my iPad as well as my wifes iPhone and her iPad, that have not been upgraded to a new OS, work fine.
I updated yesterday to ios 5.1 and now I am unable to join my home network. I have reset network connections, restarted, entered correct name and passwords and get the message "unable to join ____". i didn't have this problem until the update.
We have two iPhones at home that, all of a sudden, cannot connect to the home wifi network. I rebooted the cable modem and was then able to see and connect to the network with both iPhones and an iPad, but, a few minutes later, was unable to join the network. I have an iMac and a Thinkpad laptop that both connect fine and stay connected. I've tried rebooting the iPhones and forgetting the network, but the problem keeps coming back. I called Comcast to suggest they "change the channel" on their wireless gateway, but they couldn't do it.
My Iphone 5 gives me "Unable to join the network" for my home wifi.. i can connect to any other wifi except my own even after i took off the password from my router
I have a new 5c iPhone but can not connect to my Wi-Fi Home Wireless Network as my new phone does not recognize my password. How can I change the password and move on?
I got my x10 mini pro today but cannot get my phone to work with my home network. It's says it's connected but when I try to use the browser, facebook etc., it won't load pages (these are only working through mobile internet).
I just got a replacement iphone 4s and am having trouble connecting to my home network. When I type in my password it says it cannot connect to the network. Before I got my replacement, my previous 4s was able to connect to the same network.
My iPhone 4s keeps switching between wifi and 3G while I'm on my home network. Also I am not out of range, I'm within 15 feet of the router. Any suggestions would be great. I've done resets on both my device and router, still doing the same thing. I'm curious to know if any else is experiencing the same problem on there 4s's.
My home network using a password. When I come into the house, my iPhone3 used to connect automatically. I had a problem with my network and had to reset it. Now, when my iPhone goes to sleep, I lose the connection to my WiFi and have to re-enter my password.
I can not connect my new iPhone 4S to my home WiFi network, whereas other networks are OK. A possbile explanation - the password contains 26 characters, and I haven't tracked don't how to change that password.
Our new iPhones keep dropping the home network connection. The signal icon is there and settings shows we're connected but we need to turn Wi-Fi off and on to re-establish a connection.
I recently changed to EE and wanted to add my new number to iMesssage, so I looked on apple support and found the solution so i did it and reset my network settings but now when I try connect to my home WiFi it wont work?
when i go to settings on my iPhone and select wi-fi on, it shows my network with a padlock and i can't access my own network. how do i unlock my network? i am using an airport express as my wireless router. i do know the password for the airport express.
about a week ago, my iphone4s stopped picking up 3g networks. i have called the carrier, i was told coverage is fine in the area. my wi-fi works, calls are fine, everything works except the 3g.
I can't seem to connect to network when I'm not at home (so can't see incoming emails, updated facebook, new tweets, etc.) It still says GSM or EDGE with a few bars so it looks like I have internet but it's just not transmitting. Don't know if this is related but this seems to have happened right after I did a backup and connected the BB to the computer and desktop manager and did the update. Should I undo this? How would I do that? Or is it some other type of troubleshooting?
Today we replaced my wife's iPhone 4S with a new one, (The old iPhone, although recently purchased, had battery issues and could not hold a charge). We returned home and the new iPhone cannot connect to our WiFi network. We would select the network, and the system would not even ask for a password, but immediately responded with "Unable to join network "[name of network]". The new iPhone was able to connect to the WiFi in the Apple Store.
Per the Troubleshooting FAQ on this, I reset the network settings. We now are taken to the Password screen (which was unavailable to us before the reset), yet the the system seemingly does not take it, since we also get the "Unable to join network "[name of network]" message. Our MacBooks and another iPhone can successfully join the network and access the Internet.
Orange required me to install their Router - a Netgear DGN 1000. When trying to connect my Blackberry to the network, it finds my Home Network but then tells me that the Router supports Wi-Fi Protected Setup. To connect using a PIN (which my Blackberry will generate, click Next. I click next and the mobile generates an 8 digit number with the message "Enter this PIN into your wireless router."I cannot find a way to enter a PIN into the Netgear Router and all attempts to get help from Netgear have failed to solve the problem.The latest advice from Netgear was that I should contact Blackberry.Incidentally, the Wireless Printer and the Wireless Laptop both work inconjunction with the Router, as does the PC which is hard wired to the Router.
I Need Your Help I Have Sony Ericsson Xperia X10 Mini Pro And When I Go To Wi-Fi It Founds My Home Network Name I Put The Code But Dont Let Me Connect Please Help me I Need Download Apps/Games I Need It For Facebook/Twitter And more If You Know Something PlEase Let me Know
Since yesterday (Sunday 18 October) my Z2 hasn't been able to connect to my home network. I've tried resetting the router, rebooted it, rebooted the phone, forgot the network and reconnected. Nothing works. My mobile network still works though. Also, my Vaio laptop and my girlfriend's iPhone don't have any problems connecting to the network.
I'm having problems running videos on a new Z5 over my home network. Â The following WON'T play:
Home movies with .avi extensions made on a Canon camera Downloaded movie with .avi extension Several home movies with .wmv extension recorded by an Android phone Home movie with .mp4 extension recorded by an Android phone Commercial movie with .VOB extension TV recording in a TS format
The following WILL play
-Home movie with .3gp extension recorded by an Android phone -A downloaded film with .avi will not play via the home network but when physically copied to the Z5 it plays ok. Only tried with one movie.
There seems to be a mixture of instances as illustrated above. I also did a test movie on the Z5 then copied it to the network computer which did play on the Z5 via the home network.
Has there been an upgrade at all for the software? I am still using Google Maps v2.3.2 and the Google website still says this is up to date.Google Maps did work once, with respect to the My Location feature. Now it just sits there trying to find my location and states its waiting for the GPS.Home Network doesn't work as it will constantly try to load but cannot find the other computers in my network. It will connect via Wi-Fi no problem though.It seems as if LG made this phone, but never did anything to support it. Am I the only person who feels this way about the phone?If it's of any relevance: I am on Telus Mobility in Ontario, Canada.
I currently have the blackberry bold 9700 for tmobile.I can connect to my home network but i cant use apps such as the facebook app or the IM+ app or any social networking apps of that sort.Whenever i do try, it says you need a mobile carrier internet connection or a wifi connection. I have a white signal(showing im connected) to my home network but nothing will work.
I still have to wait for full-functionality on my X10 when the service provider gets updated to a new contract in a few weeks.However, I cant get it to connect to my home wi-fi network.It recognises the network and remembers it. The Network Key is good. Ive tried both with and without 'data traffic enabled', and of course the phones Wi-Fi is turned on- Ive tried that both through the main screen and through the Wi-Fi Settings screen.I got a shock bill last week because the phone was using dial-up connection instead of Wi-Fi without me realising it!Also, how can I ensure it chooses unsecured or 'FreeZones' when on the move over dial-up? I want to be able to use the Navigation function, but worry about the phone being connected too much, even with the internet bundle I am subscribing to.