A friend of mine has an Altell PPC6800 and she's now on verizon, she loves that phone and she's upset with the phone Verizon gave her a bit ago and still carries her 6800 even though it's non-functional. Do you have any advice on getting an Altell PPC6800 working on Verizon? She has called Verizon and had a bunch of rude representatives tell her it's not possible. Correct me if I'm wrong but I believe it's the exact same phone hardware. To my knowledge Verizon also changed their policy to accept third party phones on their service sometime in 2008.
If someone wanted to change esn on a Sprint HTC EVO would they need to unlock it, flash it, something else or all of the above?Where could one find the TUT, software and hardware needed to make it happen?
I spent a couple of hours digging around for the right tools to unlock my F3,This includes the flashing tools rsd lite 3.1 and associated images – you will need a USB-motorola F3 cable though or make your own serial / F3 cable (schematics included). These are simply just tools I've bundled up for ease of access etc. If you just want to unlock an F3, use ODM_Unlock_v118h. I have personally tested this and it works fine.
Can anyone help me out with flashing a Verizon voyager Vx10000 over to MetroPcs without losing the internet, the picture messaging or the music player? I can really use any tips or help on how to do this.
I have looked all around the internet searching for how to configure WAP and MMS after flashing. Supposedly you are supposed to use LGNPST (lab) to NVEDIT and change the WAP gateway, port, username, and password. I can change the gateways and ports but whenever I type in a different username or password it will not retain the value . Since it will not change the username or password I have set up a personal HottProxy using the default username and password, but it gives me the error "Connection failed. Please try again." I have also tried editing the values with LGDownload with no avail. If anyone has successfully got this to work please post the instructions here. I have also read about a paramtable that will store the username and password and allow changes to it. I preformed the hex edit with the third value changing it from 00 to 20 and that didn't do much. If there are links please PM me. Just as a heads up, I'm new to LG flashing (I usually do Motorolas), and am not really that familiar with all of these utilities. I have the LG VX9100 (VZW model) flashed to TELUS (CX91T09 or something like that).
I did the software update on Motorola software update, and the phone now has a verizon logo when it powers up, but when I go to activate the phone, *228, it is alltel on the line. What else do i need to make this phone work? I've tried to flash in the verizon monster with rsd lite,"VRZ_P3_NN_C_07.7A.00I_01.05.00R_MONSTER_01.ra r", but the flash always fails.
Would it be possible to flash my A455 Prepaid mobile from Telus to the Verizon firmware, or would the fact that it's prepaid mess up the flashing?I've been reading threads on people flashing their A455 to the Verizon firmware from Koodo Mobile, but noone ever mentions whether they have a prepaid phone or not.Would flashing a prepaid phone mess up the phone?
HTC has abandoned the PPC6800 on their website -- does anyone know where one can find the most recent PPC6800 (Titan) Alltel stock ROM? Can't find it anywhere on the internet (the only place that has it, ppcgeeks, has a corrupted file.)
A couple years ago my wife bought a Samsung Instinct M810. I flashed the phone to Verizon so she could use PagePlus. Everything has been working fine but the phone has really been beaten up. About the only thing that still works is the speed dial function.
A few days ago I found another Instinct in mint condition for her. I have been trying to flash it to Verizon with limited luck. I activated the phone with PagePlus and received a phone number ( I was planning on porting her number when I had everything working).The phone connects to Verizon but it can't connect to OTP. If I dial a number I get connected to Verizon with the message "Welcome to Verizon, unfortunately we cannot identify your phone, etc."
The problem is that when I dial *22890 (or any *228xx number)the signal bars vanish and there is an indicator showing no service and the call is dropped. After the call is dropped the signal returns and I can again connect to Verizon. I have tried several PRL's, even the one on my wife's current phone but it doesn't make any difference. I didn't have this much trouble with her other phone so I am at a loss.
Ok so I bought an env2 off a guy on craigslist. I dropped my old one in a puddle but I really loved my env 2 so I bought a used one from someone on craigslist. When I went to activate it I discovered it was on revol's network, I dont live in the city hence I can get coverage on revol. Still says verizon all over it when you turn it on and off. I am not very savvy with cell phones but I am with a computer. I took it to the verizon store and they tried to put new firmware on it but it didnt work. I have a tough time beleiving that it can go from verizons network to revols but not back, if anyone has a way that I can flash the phone back to verizon.
This is for my father-in-law's phone. He has just basic service, so no text or data plan. Bitpim doesn't appear to support it and I cannot find a USB driver for it. The phone does not currently have Kies installed (I don't even know if it is supported on this phone). And he can't install new applications because he has no data plan. Is he pretty much out of luck or is there some alternate way of doing this that I haven't discovered yet?
This will show you just how far out of the "loop" I am but does T-Mobile have a microsim and if so or not, is it going to be possible to unlock the v4 to work with T-Mobile? Don't have ATT where I am. Still on 1st gen and T-Mobile.
I have a 3GS that was activated on AT&T. I closed the account and moved overseas, and have been using it as an iPod Touch + camera for a month or two.Now I want to jailbreak and start using it as my phone here. I'm running Jailbreakme, but then can I do the unlocking without an AT&T SIM in there at all? I might have my old one floating around, but it's probably been deactivated, I'd imagine..
I have done some research and seen ATT now allows iphone's to be unlocked, that being said how is it done? I am wanting to leave ATT for their poor service, and go with a compnay that has no contracts. I am sick of the high bills when nothing has gone over, and paying 250.00 for 3 phones when I do not have bells and whistles!! Anybody willing to help?
I have a BB Curve 8520. I use password to protect my phone. But, now the phone is locked and when I'm entering the password, the characters are being visible which does not normally happen.I don't wish to format my phone as am not sure if I have backed up my data or not.
my curve 8520 keeps unlocking itself! i usually lock it by holding in the lock/* button, then have to press the top mute button to unlock - but it's just unlocking itself!
where do i start, app world hasnt let me in alday? so as we do we try,try and try again!!! in doing this ive reset my password and through trying its locked me out. after being on the phone to a bloke that didnt help very much ive come to the conculsion that blackberry have locked my id and i cant figure out how to unlock it
I am just wondering if there is any way I can either unlock or hack my LG prada phone so I am able to put more customisable features on it, eg different handset themes etc as it is rather bland right now, is there a way I can do this or am I getting my hopes up?
direction to get my Samsung SPH-Z400 unlocked to all networks. The phone was purchased used and has a user lock code on it... Ideas on getting passed the lock code.
There are just so many different scenerios and different options, and i'm somewhat novice, and i don't want to screw anything up, and to top it all off, i'm on a serious time crunch. so, down to business....i've got a 3g, with 3.1.2 and at&t 5.6 and modem firm is 05.11.07 it is jb.
Here is the problem: it's getting really pokey with all the stuff i have loaded on it, and i want to start from scratch. restore. but i'm scared to restore, because i don't want to upgrade to 3.1.3 because final outcome, i need to unlock as well.
What i want to do: restore to completely clean, then re-jailbreak, and unlock.
I'm planning to purchase the captivate but im not a at&t customer,does anyone knows where I can get it unlock because I heard some of the guys saying nobody able to unlock it atm.
I have already contacted 3 different unlocking companies who have either failed to provide a code, gave me a refund, or flat-out said that they don't have the code yet. Has anyone been able to purchase a code for their Radar?would this phone be able to get 3G on AT&T (unlocked of course)? I have this info from HTC's website:
I have an iPhone 16GB 3Gs that I bought off a USA-eBayer a while ago (though I live in the UK). I'm with Virgin Mobile that 'does not' support the iphone, though when I rung up before the purchase of the phone, the team said though they don't stricktly support the Apple device, but iPhones generally work on their network.
I bought in confidence and my iphone worked floorlessly for about 12 months on the iOS 4.1 system, becuase I didnt want the hastle of unlocking my phone back for the Virgin Mobile website each time I updated through iTunes, i didn't bother. Evenetually I updated to iOS 5.0 (off the internet rather than iTunes) and since then my phone has really struggled to keep a strong signal, or indeed WiFi connection. It can have full signal but then it says 'Searching...' for a couple of seconds then will find all the signal again. This as you can imagine gets pretty infuriating when its happening 4 times a minute, and only when I want to actually use the phone.
Also the phone likes to turn off at any point, even if it says it has about 70% battery and was on charge all night, then it demands to be on charge before it turns back on again, sometimes stating that it has the '70% charge' it told you before, or a dramatically reduced charge depending on its mood.If I wasn't worried about it getting locked to the original carrier, I'd just plug it up to my iTunes and update it, but as it stands, I cant do that!
A friend of mine has an older iPhone (I'm guessing it's an 'original' iPhone,running iOS 3.1.3, using his ex's PUK card, but I could be wrong about that).He's using his ex's card because he inadvertently locked his original card sometime ago and forgot his password. Is there a way he can get it unlocked, possibly using a 'generic' "universal" password so he doesn't have to use his ex's 3G card (supposedly, his old PUK was a 4G)? He's used quite a few of the attempts he has to unlock it so far and only has perhaps 2-3 more tries before the car locks permanently.
I have an iPhone 4 and it was locked to O2. I recently contacted them to say I want it unlocked in order to use my Vodafone simcard and they simply sent me a text and I unlocked the phone through iTunes. I have now inserted my Vodafone microsim (brand new and working, it does on my other phones) and it says No Service no matter what I do!
I recently bought an iphone 4 from a friend which was locked to vodaphone. I have just had the phone unlocked by vodaphone but when i put in my t-mobile sim the phone says either "invaild sim" or "no service".
I have an iphone that was purchased in Las Vegas. It is locked through telcel. Anyone ever heard of telcel unlocking an iphone? Is there a way I can buy a telcel carrier sim card and unlock it. What can i do to use this phone?
