I'm getting the error in the stock email app when trying to create a new email using my works email address.
Security warning: there are problems with security certificate for this site.
I then click continue and get this message.
Setup could not finish : unable to open connection to server. Security error occurred.
I have checked my security updates and it's all up to date. Is this a problem on my end or is it the how the exchange is set up to screw over android users at work? I have checked for a notification while doing it by scrolling down from the top and nothing is there.
As far as I have looked for, there is no available solution: Wanam module requires xposed, which is not yet available for our S6 64 bits architecture, Alliance fwk announces the feature but it is not active,
So I decided to implement the solution based on the tutorial [URL] ....
I can't get the app working on the phone (it crashes). I suspect that zipalign is doing 32 bits alignment whereas the S6 is 64 bits. I found no indications on Android dev site..
I got a I680 and using the boost plan. When I try to access the web the phone goes to "security error key exchange disabled" Am I missing something in the owners manual?
I have downloaded, installed and successfully signed some applications, but for some reason if I try to install any application it gets cut off. I mean that the installation process runs smoothly but then when I select "yes" to the security warning the installation closes. That's it. No warning or error display, it just closes.
NM on my E72 stopped today. The password is wrong, eventhough it is definitely the correct password. Other weird thing, the usernames somehow got mixed around between the 2 email addresses I have signed up. It worked just fine until about midday.
Tonight, I went to the NM website on my PC to see what is going wrong.I'm getting a warning about a wrong security certificate.Does everybody get this? I've never gotten it before, but it's been ages since I visited the NM web site.
Need to confirm for corporate email account if the fingerprint can be use in the same manner as in the iPhone? or it gets grayed out and you have to use a password instead?
I have my work email setup on my phone using their webmail address. If I use the standard address, i am required to have Maas360 installed, which is not an option with me being rooted. Anyways, if I have the email program I use, which is either Nine or Mail Wise, setup for ActiveSync, my business server will catch it and block me. So, I have to setup the email app to scan for new emails every X minutes.
The problem I am running into, is I did not know that I had to have ActiveSync turned off, so now my device is banned when using Nine mail. So, I tried the same with Mail Wise, and got banned again. Now, on my third app, AquaMail, I have realized the problem, and its working great.
However, I would prefer to use Nine mail. When trying to go back into Nine and recreate my account, i get an error that my device is blocked. I get the same error on Mail Wise. Both list a different Device ID. NineXXXXXXX and MailWiseXXXXXXXX. Is there a way to change this ID? I tried creating a new ID in Titanium Backup and that didn't change the IDs in the mail apps.
This is probably a configuration issue on my end that I cannot figure out the answer to....but when I am out of WiFi range, or I turn WiFi off my email wont sync or send and I get the error "Network Not Available: The message will be sent when the network is available" As soon as I turn wifi back on , it's fine. Is their a setting that tells an email account to only sync on WiFi? Or only send when on Wifi? It seems to ignore the 4G LTE network.
I just switched from an iphone. On my iphone, when viewing an email from my MS Exchange / Outlook or Hotmail account and I deleted that email, it would open another email. On my new S5, it goes back to the inbox. I would like it to work like it did on my old phone.I took this to the Verizon store and they didn't know how to fix it either.
I have an SLS Galaxy 5. I am current on system updates. I am using the Email app for my exchange server email. Whenever I hit refresh, and often when I simply open the app, I get a message at the bottom of the screen that says 'Email sync turned off.' I have go to through the process of 'Manage Accounts, select account, Sync Settings, and check the 'Sync Email' box every time. Then it syncs, I read my email, exit the app, and I start the process over again the next time I open the app.
I'm assuming it's possible to remove the headphone warning when plugging in after rebooting, and also to have the volume stay at the high level after reboot.
Any app that can get rid of the loud volume warning when connecting over Bluetooth? I'm sure if I root, I can do it, but not looking to root. I understand the warning is for safety , but the Bluetooth is really quiet for some reason in my truck compared to my previous phones. I need to have the volume set at full so that I can keep the volume of my truck stereo at a normal volume.
Can I manually remove the safe volume warning? Im rooted. Also how about the screen that comes on everytime Bluetooth is toggled on? And lastly, the Google location consent everytime GPS is toggled. All 3 of these things are super redundant and super annoying.
It has the following text "Following unknown links leaves your phone and personal data vulnerable. By tapping OK, you agree that you are solely responsible for any damage to your phone or loss of data that may result from following this link". There are no messaging settings that turn this off.
I was only able to find one thing from an S5 question and the solution was unchecking a setting while in safe mode? How to do that on the S6 but i don't really want to have to if i can avoid it. I'm on AT&T btw and am running 5.1.1.
For the past a month my phone has been heating up more than usual. No overheating warning or random restarts. I played hearthstone and other graphic intensive games and my cpu temp spikes up to 75c then goes back to 60c+ (using Cpu Temperature Pure). I started using the app when I felt that the device is getting hot. I am a noob at all of this and I want to know is the app giving me the right numbers? Any other way that I can check if my device is having hardware problems?
Had this same problem on the S4. Whenever I open the Google Music app, for example, and then turn up the volume using the volume rocker, that annoying warning that says "Listening at high volume can cause hearing damage..." or whatever pops up, and you have to hit OK to dismiss it. On the S5 that warning even seems to pop up more often. I never figured out how to disable it on my S4, which was running an older version of Android, nor do I know how to disable it on my S5 running Kit Kat 4.2.2.
On my new SGSII Skyrocket from AT&T, the battery indicator is inaccurate. From my observation, when I fully charge my phone and then take it off the charger, the battery indicator stays at 100%, even after some use. I was not able to reliably determine when it finally realizes the battery isn't fully charged, but most importantly this incorrect "fully charged" reading impacts the phones ability to recharge - since it thinks its fully charged it wont recharge! This is not a bug in the battery app, I tried a few, so I think it is a firmware bug.The workaround is to power cycle the phone after a little use, it starts back up with a correct battery reading and will recharge the battery when you plug it in.My battery life is about 4 hours, btw, so I'm constantly recharging....
How can I disable the"Raise volume above safe level warning" and set my volume to the loudest volume?
The problem that I have is that the audio is too quiet when using the bluetooth in my car, so every time I have to reboot my phone I have to increase the volume, skip past the warning and then raise the volume.
This happens when I try and raise the volume with either Google Music or Dogg Catcher.
The problem is that due to my work, I have to keep my phone off so I go through this at least twice a day.
I had a search but I couldn't find anything that was relevant to the Galaxy S6.
On my current SII (before the ics upgrade & after) whenever sending an SMS text message over a certain length, the message "converting to multimedia message" appears. This did not happen with with my previous SII. It is mildly annoying.
I tried to flash the newest Vodafone firmware (PDA G920FXXU3QOJQ, CSC G920FVFG3QOJQ, Modem G920FXXU3QOJQ) on my G920F using Odin.
The first ROM i tried was corrupted and didn't pass the md5-check, so i downloaded a new one from samdownloads.de and tried again.
Odin shows the usual messages until hidden.img is written, after that it says "Complete (write) operation failed" and, after reboot, leaves me with a warning screen reading
"An error has occurred while updating the device software. Use the emergency recovery function in the Smart Switch PC software."
I can power it down and reset with power+vol down, but it only gets to the same turqoise screen again and thats it. If I press the combo immediately, i can get into d/l mode, also.
Just checked a second time, failed again, now i am stuck with a phone that doesn't power off anymore. Waiting for the battery to die is not an option, just charged it, around 95% full. I suppose i have to flash a new bootloader? My TWRP is also gone, bad news. Do I have to install modem, bootloader and pit file now?
I keep getting this msg when entering my primary email address in the email address field in forms from websites I am logged into with my primary email address, so it is valid. When I type in my Gmail email address it works fine. Never had this problem with my S3. Is it because I am logged into my Google acct on my phone and if so how do i turn that off?
N97.i had my first attempt to download a free game from Ovi shop.after i got the txt message and went to the link for the download, and download completed, the blue screen said something about how the games are specially chosen > OK or Exit , the system froze, i tried to click both ok and exit but nothing happened.
i did a power off and the power on, and then when i went to setting to find the game, i recieved a message that said Security MOdule Error.every time i tried anything, like checking contacts for damage, i go the same error message.i did another power off and power on and the error message stopped.i have uninstalled the game and because it was my first download like that, i am now shy to try again.what might i have done wrong and how could i make sure it doesn't happen again.
I bought my E72 for around a week, and have exprience that having trouble for fetching emails, calendar and contacts using Mail for Exchange.I'm using a 3G SIM card with unlimited data usage so that no need to setting up a Wifi connection for internet broswing, and all of the settings which is come from my SP.I can even go for internet broswing but can't retrieve any contents about Emails, Calendar & contacts via Mail for Exchange with Google account.All of the settings are refer to http://www.google.com/sync .
Refer to the Mail for Exchange log, my MfE is Build : 2.01.000, device SW Ver : 023.00225-Jan-2010RM-530(c)Nokia, so it seems is the latest verions and updates. Let's see the MfE log below (E72 with hard reset) : 25/01/2010 10:10:56 Mail for Exch. Build : 2.01.000 25/01/2010 10:10:56 Device Software Version: 023.002 25-Jan-2010 RM-530 (C)Nokia 25/01/2010 10:10:56 Device Model: E72-1 25/01/2010 10:10:56 Serial Number: 35523xxxxxxxxxx 25/01/2010 10:10:56 Setting OFFLINE Status to False 09/10/2009 16:00:11 Setting DISK FULL status to False 09/10/2009 16:00:12 New phone SW version or 1st time to run, doing full resync 2010/04/21 01:09:39 Setting OFFLINE Status to False 2010/04/21 01:09:39 Setting DISK FULL status to False 2010/04/21 01:16:13 Destination o found via 3 access point 2010/04/21 01:16:43 Destination o found via 3 access point 2010/04/21 01:17:03 Create User Initiated Job:0, Type:"AutoDiscover": 2010/04/21 01:17:04 Setting ROAMING status to False 2010/04/21 01:17:37 Create User Initiated Job:1, Type:"AutoDiscover": 2010/04/21 01:18:08 Profile Info Peak sync schedule: Always on Peak sync days: Mo,Tu,We,Th,Fr Peak start time 08:00 - Peak end time 17:00 Off-peak sync schedule: Every 4 hours Peak sync while roaming: Yes Off-peak sync while roaming: Yes Heartbeat interval: 11 Access point: 1, Secure connection: Yes Port number: 443 Out of office: Disable E-mail sync: Enable If conflict: Server wins Remove email older than: 3 days Calendar sync: Disable Contacts sync: Disable Tasks sync: Disable
2010/04/21 01:18:08 Profile Updated 2010/04/21 01:18:08 unable to open snapshot database (-1) 2010/04/21 01:18:08 OffPeakTime active 2010/04/21 01:18:10 Profile Info Peak sync schedule: Always on Peak sync days: Mo,Tu,We,Th,Fr Peak start time 08:00 - Peak end time 17:00 Off-peak sync schedule: Every 4 hours Peak sync while roaming: Yes Off-peak sync while roaming: Yes Heartbeat interval: 11 Access point: 1, Secure connection: Yes Port number: 443 Out of office: Disable E-mail sync: Enable If conflict: Server wins Remove email older than: 1 week Calendar sync: Enable If conflict: Server wins Initial sync: Delete items on phone Remove entry older than: 2 weeks Contacts sync: Enable If conflict: Server wins Initial sync: Delete items on phone Tasks sync: Enable If conflict: Server wins Initial sync: Delete items on phone Sync completed task: No 2010/04/21 01:18:10 Profile Updated 2010/04/21 01:18:10 Cancel Job:2, Type:"Sync Job On Profile": 2010/04/21 01:18:11 OffPeakTime active 2010/04/21 01:18:33 Cancel Job:3, Type:"Sync Job On Profile": 2010/04/21 01:18:35 Activation Tracking: Sent status report 2010/04/21 01:18:35 Report : 2010/04/21 01:18:35 PING Command Requested 2010/04/21 01:19:29 Error occurred during Ping. 2010/04/21 01:19:29 Exception during Ping. 2010/04/21 01:19:29 Unable to Process Server Response -- KErrCorrupt 2010/04/21 01:20:53 Unable to Process Server Response -- KErrCorrupt Is this a server side failure or MfE Error? Before my hard reset, I've had a Error code of -15032 with MfE : 21/04/2010 00:11:36 Mail For Exchange Error -15032. What's the Error code meaning for?
I have updated to 2.2009.51-1.002. I can access my exchange server over a web browser, so data connection is working, and I have the right details. I do get a message about invalid certificates on Firefox. On the N900 I get the message "either exchange requires secure connection or account is disabled".
When I use Quick Pull to reset my Curve 8330, once the reset is complete, a window pops up stating some security tests have failed and that the radio (phone signal) is turned off. When I click details, there is a long list of codes, and the only thing unchecked is ECDSA. Any thoughts on what this might be?
When I use Quick Pull to reset my Curve 8330, once the reset is complete, a window pops up stating some security tests have failed and that the radio (phone signal) is turned off. When I click details, there is a long list of codes, and the only thing unchecked is ECDSA.
My mobile phone (N97) gives those errors ; Security Module Error and Memory Full, i sent it to nokia care point 2 times, i still have the same problem. Nokia Care point says no hardware problem, anyone have the same experience?I am fed up with sending the phone to nokia care point. did nokia release a new OS?
