BB Torch :: It Doesn't Go To Sleep Mode When In Holster
May 27, 2011
I've been using my Torch for 6 months now, and it has been working fine with the Holster (its a flip case) Everytime I close, it will auto go to sleep mode. However, since last week, the phone doesn't go to sleep when I close the flip case. I think it doesnt detect the magnet anymore. I check the Holster and the magnet is still there. I use another magnet to run it over the Torch but the phone just doesn't go to sleep mode. I've pulled the battery out and even tried with other casing, it just doesn't work anymore.
View 1 Replies
ADVERTISEMENT
Sep 1, 2011
All of my other blackberrys have come out of sleep mode when removed from the blackberry proximity holster. My brand new 9810 does not. It comes out with the blank (sleep) screen and I have to click one of the buttons to wake it up.
View 2 Replies
View Related
Jun 3, 2010
Just upgaraded from my old Pearl to 8520 OS 5 and as always ordered a now holster to keep it safe in. I have spent all last night trying to find the option of AUTO SLEEP / key lock when in holster but to no sign of option any ideas or is it now an APP i need to buy? very lost and dissapointed if so can any one help thanks.using side button to lock key pad but was very happy with it locking when put away.
View 10 Replies
View Related
Apr 25, 2011
If I use the holster that came with my 9930, it goes into sleep mode like it is supposed to, but I don't like that holster. It's too difficult to remove the BB from those holsters, when you grab it to slide it out, you also push the volume up key.I prefer the face-in spring loaded belt holster like I used with my Bold 9650. I am using ones designed for the Bold 9000 and they fit, but the holster sleep mode doesn't work. I tested the holsters with an old 9000 and they do work correctly, but no luck with the 9930 - as if the magnets are in a different location.
View 5 Replies
View Related
Jul 4, 2010
I have noticed that sometimes my IP4 doesn't go dim or sleep mode. Screen just stays on.. Usually happens when I have my text messages open but after my last message screen stays lit..
View 4 Replies
View Related
Aug 13, 2010
I just picked up a new Torch today. I've have a Bold 9000 for a long time and am used to dropping it into my belt case or pouch and having it turn off and go into in-holster mode. When I put the Torch in my 9000 cases it doesn't seem to do anything. Did RIM remove the magnet sensor and no longer have an in-holster mode? Or is the sensor in a different place and it won't work with my Bold cases? Am I missing something? I don't like having to click the lock button on the top before dropping into the case.
View 14 Replies
View Related
Dec 15, 2015
I installed CM12 on my Nexus 5 two month ago and it works fine. But I have the problem that it doesn't react when I press the powerbutton to wake it up from deepsleep mode. Then I could only reboot it.
I changed the "network type" in the settings to "3G" because my provider only supports it and I thought it could solve my problem. But it also hangs up the phone anymore.... I adapted the settings of the phone in the following way:
- Installed "Apex Launcher" as the default one
- Installed Klear Kat CM12 as Theme
- Additional Apps are: Greenify and SD Maid
I just tried the following steps to fix the problem:
1 . Installed another Launcher instead of "Apex Launcher" ---> I had the problem anymore with the other Launcher
2. Installed Open Gapps "nano" instead of "micro" ---> it ran without any crashes of the phone for a period of time. But now I have the problem again....
3. I wiped "cache" and "dalvik cache" again in TWRP --> System was clean and ran for a while. But after a period of time the problam "came back"
When I'm at home in my Wifi I doesn't have any problems with the phone to wake it up from deepsleep. Lastly I installed CM13 and had done an Fullwipe before... But I've the problem anymore .... I've the feeling that the phone looses it's reception and then the Launcher hangs and can't get up of his own....
View 3 Replies
View Related
Apr 6, 2011
I recently switched from a Bold 9000 to a new Torch 9800 with the new OS 6.0. On my Bold I could set one ringtone for In Holster @ one volume and a different ringtone @ a different volume for Out Of Holster within the same profile. So far this seems impossible with the new operating system. Seems I can only set one ringtone and one vibrate for each profile. Am I missing something?
View 1 Replies
View Related
Apr 22, 2010
I have had my phone for over a year with the OEM holster and it would put my phone to sleep, however for the last 2 days when i put the phone in, nothing happens...am i missing a setting or is this probably a hardware issue and i am then SOL
View 6 Replies
View Related
Dec 22, 2011
I'm a proud owner of a new Bold 9900 bought today. However, just now i was trying the Holster and it doesnt work. I believe the magnet is placed abit too low. As when I tried my phone placement outside the holster it seems to be able to auto lock if i placed it abit lower. Is there any way to get the holster replace?
View 1 Replies
View Related
Jul 27, 2010
My boss has a BB Curve 8530 and she wants to set it up to vibrate only in holster and ring outside of holster. Is this an option I can set up in Profiles? If so, do i have to adjust this option for every sound (i.e. MMS, e-mail, alerts, etc)?Or there an easy way to adjust these settings? I'm not very familiar with the BBs so please be gentle.
View 4 Replies
View Related
Sep 8, 2010
when you put the bb into the OEM holster ..the screen is suppose to face in NOT OUT the picture on the crackberry.com homepage linking to accessories for the torch...
View 14 Replies
View Related
Aug 15, 2010
I noticed from the unboxing videos the Torch does not come with a pouch or holster, so what holster are you using for your 9800?
View 14 Replies
View Related
Nov 22, 2012
My Torch 9810 is not recognizing the settings when it is in the holster. When I run diagnostics it picks up the holster but will not vibrate when in the holster.
View 2 Replies
View Related
Jul 2, 2012
When I am on the home page of my iphone 4S, the phone will not go into sleepmode. I have already backed it up and restored. Still only will go into sleep mode manually.
View 6 Replies
View Related
May 12, 2012
Since the whole 2.0 update, I have been having problems when it comes to getting my Playbook out of sleep mode. When I swipe the screen to wake it up, the backlight comes on, and a bunch of grey lines are displayed. The same thing happens if I use the power button to wake it up. Sometimes it will display everything but will be a negative (what should be dark is light and visa versa). I either have to reboot the playbook, or keep putting it back to sleep and waking it up over and over again until it finally works.
View 1 Replies
View Related
Sep 14, 2010
It may appear as a silly question, but I have to ask...In the box, (with the 9800), is it a pouch or a holster that come with it ?
View 14 Replies
View Related
Aug 15, 2010
Has RIM come out with a top loading belt holster for the 9800 yet? I have always used the RIM cases with good luck.
View 13 Replies
View Related
Oct 24, 2013
What's the difference and if I have both on does it cancel out the other? I had both on before and my phone never turned off the data connection.
View 3 Replies
View Related
Apr 30, 2012
Is there a sleep mode for the sounds on my phone?
Info:
iPhone 4S
View 1 Replies
View Related
Jun 10, 2012
It also goes on 3G when on stand by or sleep mode...why??
Info:
iPhone 4S
View 2 Replies
View Related
May 10, 2010
I recently downloaded the new update for my Blackberry Tour, and I have noticed that my phone is not remembering its settings (im assuming). When I have my phone holstered, it only vibrates twice and does not ring (though I have it set to Always for the ringtone) for my MMS/SMS messages. When its out of holster, it will only do the default text messing sound. I am not sure how to fix this though I have rebooted it twice in attempts for the settings.
View 4 Replies
View Related
Jun 18, 2011
I bought yesterday a Nokia X2-00 and been exploring it for a while, so far so good, pretty happy and satisfied with it, but there's a problem that bothers and I can't seem to find a solution for it. About the screen-saver, I can, for example, put it as a digital clock, and set a timer for when the phone to switch to screen-saver mode. Problem is, I don't seem to find anywhere an option to play with the sleep mode - no matter what, about 10 seconds after the screen saver goes active, the screen goes totally black (goes into sleep mode) and I need to press a button to wake it up. No digital clock display, no nothing.I need to be able to see the clock (and possibly an icon for missed calls/new texts) without having to touch a button. On all my old phones you could play with both screen saver/power saving/sleep mode options, but not here. What can I do?
View 5 Replies
View Related
Mar 15, 2010
Ok, so this is probably the worst combination of things to occur. If you don't care about reading the story I'm looking for a way to put my phone into DFU mode without the sleep/wake button. If there is a way to do this please let me know - if you want to know why I need to do this, read below... Thanks.
Last week my sleep wake button mysteriously stopped working. For a time it would work with every 5th or 6th press, but now it doesn't work at all. So for the past week I've had to forgo the use of the sleep/wake button, which means that when I'm done using my phone I had to put it into my pocket and hope I didn't hit anything until it shut itself off.
It's been manageable, but I have dreaded the day that my iPhone froze or anything, because I have effectively no way to restart the the device. Turns out that day was this evening - it froze while I was in Gmail, and I was unable to do anything. Home button was non-responsive - basically the whole OS locked up. Now obviously if I had a working sleep/wake button I could have probably held down both that and the home screen and forced the iPhone to restart - clearly I don't have that option in this case...
Worse yet, I decided to try to fix my sleep/wake button, so I took my phone apart. I wasn't able to really figure out what was going on with the sleep/wake button, and while I had the case cracked open it died. Once I got everything plugged in again, the phone turned back on, and sat at the Apple logo screen for a long time, after which it superimposed a spinning wheel over top of the logo. Truth be told, I don't think that disconnecting the screen had anything to do with the spinning wheel, I think it's a result of the OS completely locking up (the likes of which I've never seen the iPhone do before... so something in the OS must have become corrupted... at least that's my theory anyway).
It has been/continues to be stuck in this loop. I'm not sure whether letting the device die and naturally resetting itself will do the trick. I'm leaning towards the idea that it probably won't help the situation. I have not yet tried to do a restore, because I'm worried that it won't work, and then I'll lose my backup as well.
So yah... does anyone know how to force the iPhone into DFU mode without the sleep/wake button?
View 5 Replies
View Related
Oct 11, 2013
Why after updating my device my battery is draining even in SLEEP mode?
View 21 Replies
View Related
Aug 25, 2014
I have a strange symbol in my status bar (see attachment). I am having problems that the phone won't enter sleep mode..perhaps this could be an issue.
View 10 Replies
View Related
Mar 8, 2014
My Wi-Fi always turns itself on when the phone is 'asleep'. Here is a screenshot of my Wi-Fi settings. I can't figure out how to not make it turn on like that.
View 2 Replies
View Related
Aug 31, 2015
I have a samsung galaxy s6, and the battery is draining rapidly because for one, the light will not stay off on the home screen, it keeps coming back on and off. this is my second phone now in two months.
View 3 Replies
View Related
Mar 10, 2010
I got my Milestone up on Bell's network and configured it all day. Lot's of notifications of email, SMS etc. Now I want to sleep, but need the phone to still ring and SMS to notify me, as I need those for work. Any way I can selectively mute some notifications and not others depending on what time it is? I couldn't find any apps that did this, but there's quite a few.
View 1 Replies
View Related
May 18, 2012
When in sleep mode iPhone 4 loses signal but when it's back on it searches and finds signal. iOS was 5.0.1, update to 5.1 but no changes.
Info:
iPad, iOS 5.1
View 1 Replies
View Related
Mar 24, 2012
I've gone through a couple phones now, but I am still having this problem with the Triumph. Periodically, when the phone goes into sleep mode, it will not come out when pressing the power button. I have to take the battery out and replace it to get it to function correctly again. After experimenting with it a bit, it seems to only occur when I have Wifi enabled. When Wifi is off the phone seems to function in and out of sleep mode correctly. Anyone else experience this and/or have a fix for it(beside keeping Wifi disabled)?
I have also experienced some of the same issues that others have addressed on this site (random rebooting, slow GPS), but my Wifi sleep mode problem gives me the biggest headache.
View 2 Replies
View Related
