BB Curve :: The Screen Goes Black And It Wont Light Up Very Often In 8250?
Apr 28, 2012
I woke up this morning and my bb curve 8250 was frozen, so i did a reset by taking the battery out. It did reset but it won't unlock, the screen goes black and it wont light up very often, when it does it won't bring up the password screen. It is still recieveing updares as its still flashing and showing up when i recieve emails, it just won't unlock
My Curve 8250 suddenly dim out with just red led light on it. Then I pulled out the battery to restart it. As I put back the battery it is just normal yet the OS wont load. The loading bar just stop bellow the "e" in the Berry. What will I do? Its not the hardware must be the software Instead.
I wanted to use my Blackberry, so I took it out. I pressed the back button, so my screen would show. The screen was black, so I decided to press the end call button (Red). Still, nothing seemed to light up, the screen was black. So I removed my battery, put it back in. The LED light turned red for a couple of minuets, then turned off but the screen was still black. Tried connecting it to my USB Cable to the computer + the charge cable, but both to no prevail. I then thought maybe my screen is just temporarily bugging, maybe a call would do the trick. I tried calling my phone, but it went straight to voicemail. (Meaning the phone is off). The LED light shows, so what could be the problem?
i have only had my blackberry for a few months, i tried installing an update last night and it said it needed to reboot, i clicked ok and now i have a black screen with a red flashing light, i have put the phone on charge, it won't turn on or connect to the computor
I've updated my BB 8900 OS a couple of days ago. It worked fine for 1 day and then it popped up with an error message that disappaered really quickly and it go into a loop.
I tried to re-install the OS 5 and the app loader recognises the BB and the PIN is showing, but when I click next it get's stuck on "connecting with device (ARM)". The only thing the BB does now is blink its red light like morse code long-fast-fast-fast-long.
I upgraded my phone to a blackberry cure 8520 about 3 weeks ago, and I haven't dropped it or anything. It has been very well taken care of. Now the screen is completely black, and its plugged in but the red light doesn't turn on and if I try to turn the phone on nothing happens (No White Screen, No Red Light, Nothing!) Like I said this phone is not very old, and it was working a couple of hours ago and had almost half of its battery power left. The problem happened after I plugged the blackberry in. It was fine until then.
I took the battery out on my blackberry.The screen goes black and shows a red light in the top corner.When i turn it on it shows a white screen, with a black boxs in the centre that has a moving hand.Its been doing this for about ten hours, i've tried taking the battery out and sim but it hasnt helped.
I have a blackberry curve 8250 with Virgin Mobile. I updated one of my apps and rebooted when it came back on it was a white screen that says "reload software 552" I've tried doing what it say on the internet but my laptop cant detect my phone so I can't do anything.
I have a bberry 8250 and it has been working fine in morocco where i study and at home in anu for the duration. i have been in the caribbean for one week and now my phone is stuck on the loading screen and is not being registered by diagnostic software my pc and any other programs. trying to wipe it completly and to no avail.
my blackberry has been doing this thing lately where i'm using it and it just turns off without letting my know battery is low (and it usualy isn't even low) and today I recieved a phone call, I was speaking on the phone for less that a minute when it turned off.I tried to charge it and turn it back on, and now it's on, working (i'm still recieving messages etc) but theres nothing on the screen, it's completely black, not even a red lighttried taking the battery out, tried charging, nothings working It's had no water damage at all.
My phone ( sony xperia z3 black ) dropped from 1m 60. after that the screen turned black and there wasn't any sound. as soon as i plug it into the charger ( original and working) the massage-light turns red and it stays red until I unplugg the phone.
Today my touch screen on my bb torch 9800 wouldnt work, I did a battery pull and now my phone wont switch back on. the screen is black and there is a red flashing light.
My touch screen will not light up. However, I can see the keypad lighting up as well as the flashing light. What should I do? Is there any way to fix it? This started a few days ago....but then it appeared to fix itself. But now, the screen will not turn back on.
I only purchased my bb torch for one week now, all of a sudden I am seeing black screen and the top red light stays on when i put the phone on or plug it, but nothing on the screen.
So I bought my AT&T Bold 9700 last month when it first came out, and have had no troubles with it so far. I've tried searching for a thread like this but haven't found any.My 9700 just randomly "rebooted" this morning, where the screen goes black and the red led light turns on for a couple of seconds. This has happened to me before on my old 9000, where after it would then start up again. Nearing the time when I replaced it, it would do it quite frequently (and to think it just started getting really bad AFTER the 1 year warranty on it expired!). So back to the 9700, the progress bar that comes up when you're starting up the device would then come up, and sometimes load for about half an inch, sometimes only up to an eighth, before the whole thing would start again - the screen would turn black, the red led turns on, and the progress bar would come up again.I pulling the battery out for a few minutes and putting it back in but its still doing it. I then pulled it out for about an hour and its still doing it again.
I just replaced my screen on my Nokia Lumia 1020. And now the screen is just black, but when i put into a charger there's a green light at the bottom of the screen.
When I'm trying to power on the phone, I get the initial black and white "Samsung Galaxy S6" screen. Then everything goes black and the blue LED on the top left lights up and stays on, does not flash or dim, just stays on. The phone does not vibrate or make any sound when it does this.
What I've tried to fix it:
1) Power + Volume down (maintenance boot mode) ... I've tried normal boot, factory reset and booting in safe mode, all just give me a black screen with the blue LED.
2) Power + Volume Up + Home (andoid system recovery screen) ... When doing this, the phone displays the black and white "Samsung Galaxy S6" screen, followed by a bluish colored screen with a little android guy on it, followed by the dead android guy with a yellow exclamation triangle over his head, then goes into the android system recovery menu. On this screen I can wipe data/factory reset and wipe cache partition and reboot and I still get a black screen with a steady blue LED.
3) Power + Volume Down + Home followed by Volume Up (Downloading screen) ... Takes me to the bluish screen warning me about downloading a custom OS. After hitting up it does not show the knox has ever been triggered. I've tried using ODIN 3.10.6 to reinstall fresh firmware (5.1.1 G920VVRU3BOG5) and after it successfully installs it, it boots to a black screen with the steady blue LED.
Unfortunately my BB9900 past away. Black screen, Red light flashy and all the same symptoms in previous other posts. I have tried:
- Batt pull - Chargin with Power cable and/or USB cable and pull the batt in / out - Installing software - Resetting with BBSAK and JL CMDer
All without any result. Only thing is: When I pull the battery and connect it with my PC, after 30s/60s I see a battery (with a red cross) in the screen. I have tried now to install the software trough "c:program filescommon files esearch in motionapploaderloader.exe" /nojvm but no luck. Is it possible to connect with other software? Where can we download software to Flash the Rom and are their any ROMS available? My guess is a software failure in the ROM.
I'm having problem with my storm phone ever since it was dropped in water. I left it to dry for a week. Since then I replaced my battery and the phone came on with the clock and then the screen showed up. and could not do anything. Then the screen went black. Now when I try to recharge it only a green light appears and nothing else. Did I kill my battery and is the phone no longer good or it's just my screen and i can replace it.
I updated my N97, and after that my phone did not work properly, the old version was 2.0 and the new is 2.1, the charging light did not work and i get black screen when i turn my phone on.
My curve started disconnecting calls yesterday. SMS, MMS, BBM all work perfectly fine but I am unable to make outgoing calls without it disconnecting, and I must pick up before the second ring if there is an incoming call. If I reregister my phone, I am usually able to make one successful call before it stops working again. I have reloaded the software, and taken out the battery and SIM card. Nothing seems to work.
I just got my Curve 8250 yesterday, and I spent last night setting up my ringtones. I put the phone in Vibrate mode when I was asleep, and when I put it back into normal mode this morning, nothing happens when a text/PIN/phone call comes through. I just get the red flashing light. I've done a 30-second battery pull and made sure that the profiles were as I'd made them yesterday.
I received a call then I clicked the volume button to silence the phone, then after a while I noticed that the phone is totally hanged, so I tried to do a hard reset by removing the battery and putting it back again, but while booting the progress bar goes up to about 70% and then it stops and the phone never starts..
I recently sent my phone into repair (Blackberry Curve 8250) as it was completely ruined. I took my SD card out as i have soo many photo's, video's and song's on there and didnt want to lose it. But ever since my phone has come back ferom repair, it picks up that i have inserted the SD but once it has read it nothing is saved on there anymore?I have tried formatting it, setting up the SD card onto the phone, more a less everything. But the funny thing is when i put the SD card in to my brothers Blackberry, everything is on the card!