I recently updated my applications on my phone (blackberry curve 8520) though the blackberry desktop manager - after the update some of my icons vanished. I can no longer lock my phone. Please can someone tell me what to do to get back the lock button.
I am trying to enter the PIN code but the Num Lock is On and I cannot switch it oftherfor cannot use my phone. I have read the phone instructions re ALT and Left SHIFT -no good. I also tried removing the battery. -nope, didn't fix it.
I used to have the keyboard lock option set for my right conversion key. I installed the new OS update and poof.conversion key is nothing now, and when I went to reset it, I cannot even find a keyboard lock on my phone anywhere! Please help, I'm calling people all the time, not good!I have a new curve and Sprint, by the way!
I dropped my phone not too long ago, and ever since the lock/unlock key on the top is very fussy and only works if pressed a certain way. I tried changing the lock button to the convenience key, and it works fine, except that there isn't an option to set it as the unlock key. Is there a way or program to set a key to unlock the phone? Or am I stuck using the dedicated lock button?
After Upgrade of OS from 4.6 to 5.0 keyboard lock icon is gone from menu. BB also doesn't respond to lock button at the top of the handheld.Does anybody know what happened and what is remedy.I also have Bold 9700 and afraid to perform OS update.Please advise.
I recently upgraded my software to the newest 5.0 version. However, it seems like the ability to lock the keyboard is gone!When I press the top left hand button (lock key shortcut), nothing happens. Tried doing a hard and soft reset. Still doesn't work.I tot that my button was spoilt, so I programmed QL to have a lock device shortcut. But guess what? Nothing happened either! I am aware that I can press and hold the A key to do a pseduo lock, but that is not what I want.Anyone else facing the same problem?
Just a quick question; which is better for saving battery when my Blackberry is sat in my pocket - Keyboard Lock or Sleep Mode? I don't use the holster. Also, what are the main apps that kill battery on the BB and any tips to save battery?
please help...i just updated my BB curve 8900 sofware to 5.0 and after the installing process my keypad lock is not working anymore...i can't find it anywhere on my BB!
I upgraded the other night to the V5 and I'm really not that happy with it. I can't stand the new lock feature. I also seem to be having a problem when I lock the phone. After pressing the top left button or holding "A" I can't get the phone out of lock without holding some of the buttons down for like 6-7 seconds. When I try to press the send or end key the screen doesn't even come on. Even when I press the top left lock button. I have to hold it in and it's REALLY annoying. I'm seriously considering downgrading. Anybody else having this problem???
I recently got a Curve 8900, and I can only lock/unlock it by pressing the top button.On my brother's Curve.he's able to lock/unlock by pressing A+Send.For the life of me I can't figure out how to get mine to do the same thing.I went to the "Tips and Tricks" section for my phone,and it actually says that the A+Send option is the standard way to lock/unlock.Now I'm confused.Please help.
I updated my OS on my 8900 to the latest version yesterday 5.0.0.681 Most of it looks the same, however I used to use the lock ley (top left ) on my handset, to password lock my unit before putting it in my pocket. Now I find this only put the unit into and out of standby. Does anyone know why this has been changed? Can it be changed back? I am really angry that this usefull feature has been removed without the ability to customise my handset and put it on.Why could it not have been an option to change what this key does? From a quick search on Google I see lots of other people have the same problem, and some are even paying to download aps to fix the problem!! For now I have changed my side convience key to activate the password lock, so all I have to do is keep remembering to press side button instead of top button. I cant even find anywhere that I can contact RIM about this, and request they reinstate the lock key. Very disapointed with the way this has been handled and the lack of support / advice / comment from RIM.
I just downloaded the software update v5 and when it was all done my keyboard lock key stopped working, has anybody else had this problem? any solutions other than a downgrade?
I use A BlackBerry Curve 8900 I had to shut down my phone and when I tried to pwer it up the keypad lock was activated . I have tried to unlock it using the lock key and also the * key but both dont work. I have also tried doing a hard reboot ( removing the battery and then turning on the phone. This has not worked either. Is there anywya to bypass the keypad lock and also can the keypad lock be deactivated.
i just bought the phone off of a mate knowing the problems but my g1 tottally died.so the only way i can make a call is threw a headset and also the ringtone speaker doesnt work so have to have my phone out all the time to see if i have a call/text :| when i open the camera i get "could not start the camera, close other applicaions and try oppening the camera again".
the lock and mute keys on top do not work atall and recently the volume key has stopped working. ive tried googling the problems but havent found much information on my problems. could it be the actual speaker. or the plastic midplate with the metal contacts on?im not too bothered about the camera and keys just the speakers soo i dont have to walk around with my phone in my hand with my headset in.
i've just upgraded my 8900 from 4.6 version to 5.0 os version, all programs are running good but i find one small problem for the keypad lock on the top left side of the unit, it doesn't work?
When I use the shortcut lock, my phone locks the keypad, but instead i want it to be the password lock. I used my dad's phone and tried his shortcut lock and it works on his phone. what do i do to lock my phone using the password lock?
My phone does not ring or make any noises whatsoever. If someone calls, it will only vibrate. My profile is set to loud. Both in and out of holster are set to vibrate+tone. The only time I can hear sound is when the headset is in. I have tried removing the battery, but still no luck. There has not been any water damage to this phone. It was working fine for a while, and then one day it just stopped.
I downloaded the new Bolt browser on .348 and after it installed it said to reboot so I did that. Ever since then my phone will show the Blackberry loading screen, then the red LED flashed for a few seconds and then it does it all over again. I left the battery out all night it did not help. DM shows no PIN connected because it obviously isn't booted.
I had my phone outside with me while i was swimming. my phone didn't get wet at all and was never in the sun, and was covered by a towel. however, when i went to go pick it up, it was in the process of restarting. when it finally got to the tmobile screen, it vibrated, then turned off and restarted again. it's been doing this nonstop. i've tried taking the battery out, plugging the phone in, then putting the battery in. keeping it on the charger while it restarts. letting it die completely from it restarting so much. and leaving the battery out for a few hours before putting it back in. however, none of it has helped. I've looked at other forums and help sites, but it all says it has to do with a new os. i haven't downloaded anything on to my blackberry in months. i've seen things about using desktop manager, but my computer is broken right now, too. :/ for awhile, my memory card kept saying that it had an error and needed to fix it on desktop manager, but again, i haven't been able to use my computer.
I bought a new blackberry curve 8900 just 3 months back & trouble with it is that whever a new SMS arrives & I check it after say long time (15-20 mins)...the phone goes off - and on after few seconds.
Has anybody faced the same issue? Is it a known problem? If yes, does Blackberry has it posted on their official website?Please let me know what could be the problem. Thank you & if you have more info..pls pass it on.
Last night my battery was low. So i put it in the charge before i went to sleep and today morning my alram didnt went off annyways than i looked at the plug and the switch was off. so i am assuming i neva put on charge. Now its been on charge for an hour and it just wont turn on I connect it and the LED lights stays for a minute and then i get this empty jug with blue bolt sign saying its charging.
My phone won't register when I hook it up to the USB port on my laptop. I haven't had any issues before, and the last thing that happened to my phone was that I updated the OS to the latest version (5.0.0.681). I did this on Monday and tried to hook my phone to my computer yesterday (first time since update). It wasn't recognized and I messed around with it for a while. I eventually did something that got it to work, but I disconnected it and since then, I haven't been able to re-hook it up. When I do hook it up, my phone charges, but my computer doesn't realize it's there.
This is my first post on the forums, but I do think I'm a fairly knowledgable BB user. Had 3 BBs over the course of a few years, so I can usually rectify small problems as they arise. However I've recently come across something that I am not sure how to solve, or maybe it is not fixable- I do not know.Basically my phone has been making a constant heartbeat sound when I make or receive calls. Doesn't matter if it is on speakerphone, or the normal phone. Its also not just a slightly annoying noise in the background, it cuts off the person on the other end and breaks up their speech. Essentially kills any phone conversation because I cannot understand the other person. I am not sure if the other person can hear me or not. This has been going on for about 3 days now, and is very irritating.I would like to find a way to fix it rather than get a new one. My old pearl's trackball died, so I had to get a new phone, which led me to the 8900. The keyboard on that quit working, so I got a new 8900, which was luckily just under the one year warranty. Now this one is having this problem, but its just a few weeks outside the stupid 3 month warranty on replacements. I'm fed up with ATT and BB because of these device failures, and also because ATT never provided me with my $100 rebate, even after complaining to corporate.It's just a situation where I feel robbed in a way, and just want to find a way to get my current phone to work thru the rest of my contract so I can upgrade to a better device.Any suggestions of how to rid myself of the heartbeat noise? I'd really appreciate it.
Since yesterday my 8900 stopped ringing and clock alarm does not work anymore.What I have done:
1. Profiles. Reviewed my Normal(Active) profile under the Profiles menu tab Advanced. Tried several options on the Phone settings, including Out of Holster: Tone, Vibrate+Tone, changed the Ring Tone, changed the Volume. Made sure Mute, None, or Do Not Disturb options were NOT selected. Nothing.
2. Chose a different profile, such as Loud. Nothing.
3. Turned the phone off, pulled the battery out and reinserted. Nothing.
4. Turned the phone on, pulled the battery out and reinserted. Nothing.
I just tried to play a music but it failed untill I pressed Menu and selected Activate Handset instead of Speakerphone and the music start to play. My version is 4.6.1.206
My Curve 8900 went into standby mode with a message to press the mute key to prevent this. Since then I have pressed the mute key and nothing is happening.