have recently been having few issues with my phone, and noticed im still running the original firmware R1CB001.Installed SEUS, follows all intrustions, gets to where it has progress line for installing the firmware.the update starts but after about 30secs, i hear the sound from my pc as if ive just unplugged something from usb and then few seconds later as if something has been plugged back into usb, then the bar just jumps to the enter and says update complete.Turned phone on again, checks software version and still shows as being same as it originally was.Does anyone have any ideas on whats happening and any possible fix?
The story is my C905 got splashed and some buttons on the keypad stopped working. I sent it to SE and they said they returned it unfixed because of the water damage and corrosion that spreads. However, when I put my SIM card back it, it now says "Insert Correct SIM" even though the SIM card works in my W810. They even replaced my keypad and every button works.After looking up my SIM lock info, everything says 0.Does anyone what happened and how to help?
I have just bought this phone and wanted to know people's reviews on it especially for music, camera etc . Also anywhere I can download a guide that tells me how to insert the SIM etc. into the phone .
When i switch my phone on a message comes up on the screen saying "insert phone sim card", or view demo for this phone! it will not let me acess the phone at all apart from emergency calls.
I have Phone A which I was told to upgrade to resolve an issue. Before upgrading, I used manage messages to copy messages by a specific contact to my memory card. After backing up, I checked the memory card tab to see that those messages had been transferred they had. I removed the memory card so the upgrade won't accidently delete stuff on there from Phone A and continued with the upgrade. After the upgrade, I put the memory card back in and went to manage messages to restore them nothing showed.
I was on the phone to sony ericsson for half hour and they couldn't figure out why they were not showing, saying I had not backed them up, but I know I had. I have another phone which is the same as Phone A. I inserted the memory card into Phone B, went to manage messages. It showed messages on the card, but those that I must have backed up a few months ago rather than those I backed up today which didn't show in Phone A
It seems it only reads SMS's on the card dependant on the firmware version. How can I retrieve the messages I backed up today? I've been told I can't rollback the firmware version and even if I did, I didn't note down what it was. Those messages were REALLY importants and I would very much like to get them back.
Ive just recently got my new vivaz and have run the latest update. Can anyone tell me what the changes are in this new update? Id also like to know whether it is possible that a flash can be programmed into the vivaz instead of the light being constantly on. This is the only annoying aspect of the camera.
My K800i turns itself off every (est.) 10 seconds after I turn it on. I tried taking the mem.card off & changing the batt but it didn't solve the prob.I used the master reset(all setting) but it wasn't successful because at the midst of the procedure, it turned off.Now whenever I turn it on, it only says "please wait" (probably because of the reset I did) but it would not continue even if I wait for a couple of hours.I tried updating it with Update Service but it failed. I tried several times and same things happened.
my gps in hazel was working fine with the earlier firmware. It took time from 5-15 minutes but it did get lock-on but after the update of the firmware from SEUS it is not working. I mean I even kept the tracker app running for almost 3 hours and at different locations but for no use.
We need SE engineers to solve GPS problem with SE Elm. After firmware update to R7CA061 it cannot lock to any satellites. Tried few locating applications using A-GPS as well as GPS only, but without success. Tried GPS test - request sent - test timeout - no success. Forget about navigation and forget about training with tracker application. By the way, what about free navigation software? Nokia has it. Actually, this is not the issue any more, since my GPS is not working.
I'll be quick with this, I updated my new AINO 3 hours ago and I realised that in return for making my mobile faster from the updated firmware, some items seemed to have disappeared: Missing red streak in MEDIA PLAYER TOUCH SCREEN UI, slightly laggy media UI in the touchscreen media player, removed ULTIMATE particle background in the media player and touchscreen MEDIA PLAYER UI icons seem to pop up smaller.Has anyone experienced similar problems from the update? My AINO is actually runnin pretty faster now but i'm just stating so that I don't know I'm the only one cause apperntly there are quite a few users on websites saying that the update scroowed them over. But yeah, the phone is grand but just some things went missing? Is this normal from an update if you have experienced it?
I updated the W995 firmware yesterday using SEUS. After update firmware is R1HA035. But according to the forums on this site the latest is R1HA036. Why didn't I get the latest? Also after update I turned my phone on and I got the long please wait message. During this message I got a pop up message for Daylight savings update and I selected yes then back to the please wait message. Then phone started normal. Did the pop message effect the firmware installation and shall I reinstall firmware or is everything ok?
I am getting no sound from the speaker on my k800i. I can not hear ringtones, or music. The sound does work on the ear phones, and the phone is not in silent mode. The volume is set high. I can hear the voice of other callers. Any ideas?
I have a Sony Ericsson K800i and until two days ago it was working just fine. But then it displayed the "No access to network." message and I couldn't make or receive any calls. I tried to restart the phone, to take off the battery, to reset the settings, to set a network manually etc etc but still nothing.
And while it is searching for a network, it is draining the battery too. It was fully charged this morning, and now it's only 25%. Normally, it should take 3-4 days to reach that power level. I should mention now that I'm in roaming in Munich, Germany since three weeks, and my phone bills are payed on time, so it shouldn't be an mobile operator problem.
My phone (K800i) has displayed no network coverage for almost a month now, I have tried network search auto and manual, and I have tried my SIM in other phones and it works fine. Does anyone have any suggestions because I am fed up of this phone I am having to use while I try and fix my own.
where to download latest XS++ version. i am using k800i does it work with that .i fu have time tell me how 2 use it just tell main thing if dont have time give me a link
I have a problem with battery.I let recharge all night and still Says "Low Battery" all the time and battery icon is not full but empty and a red light near infrared turn on and off i don't know what to do can someone help me with it please
I know many people have written about this but I have a dead SE K800i. I have tried updating via SEUS and it says it is updating but phone still does not turn on. I have also tried updating with wotan client but get only so far and then nothing.
I'll be buying a 2nd Hand/Pre owned k800i this coming June 10,2010 and would have to know your ideas on what drivers are okay. I've been searching about these drivers, I did find some great drivers from modders like number 1 and more. but, my concern is, I still don't know the specs of the phone i'll be getting since the owner barely uses the phone and has no idea about modding. I'll post additional info once I get the phone. I would like to improve the camera (for pictures), video (can we upgrade it to QVGA instead? and 35fps if its good), i also would like to change the UI to mimic the k810i's and lastly the sound driver so that it would be louder. If there's anything better to modd for my phone, would really appreciate.
I took a K800i phone apart to fix it, achieved the fix, and put it back together again.Now the power button (not the rubber bit you touch but the tiny button underneath it) has well gone!I can't figure out whether it's fallen out, snapped off, been pressed to hard into the unit or what.Thing is, this is the 4th time I've managed to do this with 4 separate phones and want to learn how to (a) avoid the problem and (b) ideally fix it.Can anyone give me any advice on this?
i have k-800i device,i cannot open my inbox,sent items or drafts.It is not highlighted at all.Similarly when i send the messages to this device.it doesn't show any notfication or does not receive messages.What could be the problem? How can be rectified?
I bought the K800i a few months ago. I bought it from eBay, Hong Kong. Now it's been having SOOO MANY PROBLEMS, network, smsing etc.I am using XS++ 3.1,This is what it's telling me: 13:06:54| Baseband ID: 9900 13:06:54| Protocol Version: 3.1 13:06:54| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K800) 13:06:54| ...using GDFS name 13:06:54| 13:06:54| Profiling SEMC phone... 13:06:54| Platform: DB2020 13:06:54| OTP CID: 51 13:06:54| EROM CID: 53 13:06:54| EROM Color: Red 13:06:54| IMEI: 35258622xxxxxx 13:06:54| Phone ID: K800 13:06:54| Region: EUROPE_1 13:06:54| CDA: CDA102568/101 R12A 13:06:54| Firmware Version: R8BF003 13:06:54| EROM: R3A099 13:06:54| Ready for operation! Can i flash it or something? because Sony Ericsson won't let me update it.If I can flash it, can someone tell me how, and provide me with all the softwares needed please?
