have recently been having few issues with my phone, and noticed im still running the original firmware R1CB001.Installed SEUS, follows all intrustions, gets to where it has progress line for installing the firmware.the update starts but after about 30secs, i hear the sound from my pc as if ive just unplugged something from usb and then few seconds later as if something has been plugged back into usb, then the bar just jumps to the enter and says update complete.Turned phone on again, checks software version and still shows as being same as it originally was.Does anyone have any ideas on whats happening and any possible fix?
my k800i phone dropped dead and i have been trying to fix it.When i start the phone it blink red from ir port and the screen turns white. I have been trying to flash but cant really figure out how to do it exactly and find the files to do it. I updated the CID to 52 instead of 49 with XS++. So if someone could Help me i would be grateful! 16:26:46| Hold 'C' button on phone and connect phone NOW. 16:26:46| You have 30 seconds. 16:26:46| 16:26:46| Baseband ID: 9900 16:26:46| Protocol Version: 3.1 16:26:46| Phone name detected! 16:26:46| 16:26:46| Profiling SEMC phone... 16:26:46| Platform: DB2020 16:26:46| OTP CID: 49 16:26:46| EROM CID: 52 16:26:46| EROM Color: Red 16:26:46| IMEI: 35399601xxxxxx 16:26:46| Phone ID: K800 16:26:46| Region: EUROPE_4 16:26:46| CDA: CDA102568/13 R5A 16:26:46| Firmware Version: R1JG001 16:26:46| EROM: R3A016 16:26:46| Ready for operation!
Every time I try to install a java application on my wife's k800i I get the message 'operation failed'. I am sure I am doing things correctly because I do the same thing with my c902 and it works fine. Any ideas?
My phone was working properly. Then it went to a screen with the following message: "Configuration error. Please contact your network or service provider". The phone can receive incoming calls, but that is it. I have tried the update service. Result - Your phone has the latest software update.
Using the SE PC Suite, and connecting by using the USB cable, a list of folders is displayed which are empty. Using the "Phone Repair" from the SE PC Suite, and after following the instructions, the only result is - "Update Failed". Please can someone assist me in sorting out this problem?
Ive just recently got my new vivaz and have run the latest update. Can anyone tell me what the changes are in this new update? Id also like to know whether it is possible that a flash can be programmed into the vivaz instead of the light being constantly on. This is the only annoying aspect of the camera.
My K800i turns itself off every (est.) 10 seconds after I turn it on. I tried taking the mem.card off & changing the batt but it didn't solve the prob.I used the master reset(all setting) but it wasn't successful because at the midst of the procedure, it turned off.Now whenever I turn it on, it only says "please wait" (probably because of the reset I did) but it would not continue even if I wait for a couple of hours.I tried updating it with Update Service but it failed. I tried several times and same things happened.
my gps in hazel was working fine with the earlier firmware. It took time from 5-15 minutes but it did get lock-on but after the update of the firmware from SEUS it is not working. I mean I even kept the tracker app running for almost 3 hours and at different locations but for no use.
We need SE engineers to solve GPS problem with SE Elm. After firmware update to R7CA061 it cannot lock to any satellites. Tried few locating applications using A-GPS as well as GPS only, but without success. Tried GPS test - request sent - test timeout - no success. Forget about navigation and forget about training with tracker application. By the way, what about free navigation software? Nokia has it. Actually, this is not the issue any more, since my GPS is not working.
I'll be quick with this, I updated my new AINO 3 hours ago and I realised that in return for making my mobile faster from the updated firmware, some items seemed to have disappeared: Missing red streak in MEDIA PLAYER TOUCH SCREEN UI, slightly laggy media UI in the touchscreen media player, removed ULTIMATE particle background in the media player and touchscreen MEDIA PLAYER UI icons seem to pop up smaller.Has anyone experienced similar problems from the update? My AINO is actually runnin pretty faster now but i'm just stating so that I don't know I'm the only one cause apperntly there are quite a few users on websites saying that the update scroowed them over. But yeah, the phone is grand but just some things went missing? Is this normal from an update if you have experienced it?
I updated the W995 firmware yesterday using SEUS. After update firmware is R1HA035. But according to the forums on this site the latest is R1HA036. Why didn't I get the latest? Also after update I turned my phone on and I got the long please wait message. During this message I got a pop up message for Daylight savings update and I selected yes then back to the please wait message. Then phone started normal. Did the pop message effect the firmware installation and shall I reinstall firmware or is everything ok?
I am getting no sound from the speaker on my k800i. I can not hear ringtones, or music. The sound does work on the ear phones, and the phone is not in silent mode. The volume is set high. I can hear the voice of other callers. Any ideas?
I have a Sony Ericsson K800i and until two days ago it was working just fine. But then it displayed the "No access to network." message and I couldn't make or receive any calls. I tried to restart the phone, to take off the battery, to reset the settings, to set a network manually etc etc but still nothing.
And while it is searching for a network, it is draining the battery too. It was fully charged this morning, and now it's only 25%. Normally, it should take 3-4 days to reach that power level. I should mention now that I'm in roaming in Munich, Germany since three weeks, and my phone bills are payed on time, so it shouldn't be an mobile operator problem.
My phone (K800i) has displayed no network coverage for almost a month now, I have tried network search auto and manual, and I have tried my SIM in other phones and it works fine. Does anyone have any suggestions because I am fed up of this phone I am having to use while I try and fix my own.
where to download latest XS++ version. i am using k800i does it work with that .i fu have time tell me how 2 use it just tell main thing if dont have time give me a link
I have a problem with battery.I let recharge all night and still Says "Low Battery" all the time and battery icon is not full but empty and a red light near infrared turn on and off i don't know what to do can someone help me with it please
I know many people have written about this but I have a dead SE K800i. I have tried updating via SEUS and it says it is updating but phone still does not turn on. I have also tried updating with wotan client but get only so far and then nothing.
I'll be buying a 2nd Hand/Pre owned k800i this coming June 10,2010 and would have to know your ideas on what drivers are okay. I've been searching about these drivers, I did find some great drivers from modders like number 1 and more. but, my concern is, I still don't know the specs of the phone i'll be getting since the owner barely uses the phone and has no idea about modding. I'll post additional info once I get the phone. I would like to improve the camera (for pictures), video (can we upgrade it to QVGA instead? and 35fps if its good), i also would like to change the UI to mimic the k810i's and lastly the sound driver so that it would be louder. If there's anything better to modd for my phone, would really appreciate.
I took a K800i phone apart to fix it, achieved the fix, and put it back together again.Now the power button (not the rubber bit you touch but the tiny button underneath it) has well gone!I can't figure out whether it's fallen out, snapped off, been pressed to hard into the unit or what.Thing is, this is the 4th time I've managed to do this with 4 separate phones and want to learn how to (a) avoid the problem and (b) ideally fix it.Can anyone give me any advice on this?
i have k-800i device,i cannot open my inbox,sent items or drafts.It is not highlighted at all.Similarly when i send the messages to this device.it doesn't show any notfication or does not receive messages.What could be the problem? How can be rectified?
I bought the K800i a few months ago. I bought it from eBay, Hong Kong. Now it's been having SOOO MANY PROBLEMS, network, smsing etc.I am using XS++ 3.1,This is what it's telling me: 13:06:54| Baseband ID: 9900 13:06:54| Protocol Version: 3.1 13:06:54| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K800) 13:06:54| ...using GDFS name 13:06:54| 13:06:54| Profiling SEMC phone... 13:06:54| Platform: DB2020 13:06:54| OTP CID: 51 13:06:54| EROM CID: 53 13:06:54| EROM Color: Red 13:06:54| IMEI: 35258622xxxxxx 13:06:54| Phone ID: K800 13:06:54| Region: EUROPE_1 13:06:54| CDA: CDA102568/101 R12A 13:06:54| Firmware Version: R8BF003 13:06:54| EROM: R3A099 13:06:54| Ready for operation! Can i flash it or something? because Sony Ericsson won't let me update it.If I can flash it, can someone tell me how, and provide me with all the softwares needed please?
I have upgraded the firmware in my W910i, and now it doesn't see/recognize the messages (email, SMS, MMS) that have been saved to the M2 memory card, nor does the phone see/recognize the Java applications I'd added. I know all this data is on the card, because I've seen it, via a card-reader, on my notebook.
I have kept a record of all firmware change activity, except I don't know what the original firmware details were, i.e. straight out of the box. I use this SE 'jewel' as a Walkman/iPod, a PDA, and as a serious portable email client, and don't want to lose the ability to migrate my email through any OS upgrade (or phone model upgrade, as I also have a W705a).
I know those 5-6 files (like MSTK_PRO.IND) in the root directory of the memory card have something to do with it, but I don't know how. I have actually seen that the content of the email messages (body.dat files in sub-folders with long numeric names) is simply pure text. I hope there is a way of 're-sewing' the pieces together, using some sort of key formula.