Sony Ericsson :: C905i / Small Orange Flashing Symbol On Camera?
Aug 3, 2010
There is a small orange flashing symbol when i set my camera with the flash on, and it won't take a picture. The light works as when set with flash off the light comes on once and takes the picture (without the flash). HELP Please, Is it a warning symbol? or have i don't something with the settings?
Have just got my vivaz replaced as the charge port came out with the charger to find that the new phone constantly has the new message symbol flashing in the top left hand corner, was wondering how to get rid of this as it is driving me crazy. Have tried turning the phone on and off again and deleting all my messages but it's still there.
I just purchased a C905i unlocked version. I currently have TMobile service, however I somehow cannot get the WiFi to work. I've tried a couple different networks, but they don't seem to work. And also, I also don't know how to send picture messages. It tells me to set up some sort of account.
So I got this phone for Christmas.And I had a few troubles at first but nothing a quick post on these forums didn't clear up. But a few days have gone by and new problems have developed. Any help would be appreciated.
1) The middle button (used for menu and selection) is not working. But when I turn the phone off for about 5 or 6 minutes and then turn it back on it magically works again for about.5 or 6 minutes.What is the problem and how can this be fixed?
2) when I turn the phone off and back on it makes the sounds of it starting up but the screen just stays black.and then I have to let it sit for (go figure) 5 or 6 minutes before the screen shows. please help with this problem as best you can
i have just purchased this phone and need a bit. i know you can alter your home screen via settings, personal, themes and then standby theme to different types but i really like the orange theme. BUT on the home screen there are lots of boxes for different things, can i alter these i.e remove them. i know how to add them but don't seem to be able to remove them . hope that all makes sense.
The picture from my Sony ericsson elm camera is very bad. Sometime there are an orange or blue lines at the picture.What is the problem?When i look at the other forum, they say it is because of the cam driver problem.Anybody know how to change ELM Cam driver.My Elm cam driver version is v3.8, and I already got cam driver v3.9,but i can't replace it using FAR or others tools (XS++)
Here are at least two small but practical features removed from the Elm, previously on ALL Ericsson phones at least from the T28:
1. hold down the "back" button a little longer to get to the top menu immediately
2. the volume buttons on the side were one step / two steps ahead when writing text. Press A to get A, press A and volume up to get B, press A and volume down to get C and so on. Very practical when you write text messages in several languages - and FASTER than T9 overall.
Just got the Vivaz and love it except that I can't customize the main page to have a larger time and date display. The time is way to small for me to see. I did put large on the font under setup, but still find it very small throughout. Any ideas how to customize or override this?
I got my MMS setting from my current network but the problem is, whenever I receive MMS pictures, I will receive it in small size, too small I guess, about 3kb. I even try to send MMS to my number but still it will appear in a small size.
I've recently got a symbol appear on the status bar next to the signal strength (see picture via link below), the symbol is a picture with a red arrow bouncing off.
For last few days I am having a problem with K790i. When I turn on my phone it shows a small box showing 'Please wait' after the Sony Ericsson logo disappears. Then after waiting for about 10 minutes another small box appears with same 'Please wait ' error. I tried the FW update by SEUS, but it's taking just 30 seconds to install, which I think is weird and might be it's not even updating. So is there any way to Master Reset the phone without being on? By the Keys or something?
Just yesterday I installed new version to my phone (flashing) and the WiFi doesn't work. I find my network, connecting in to it, but web browsing is not working.
Whats the difference in connecting the phone to a2 uploader using "c" key and "2+5" keys..? which type is more appropriate for flashing. (if there is any difference) and also for patching... Pls.. anyone can clear this doubt..?
I've find this wonderful website yesterday when I was looking for flashing my SE C903. I've seen very interesting things as acoustic mods (to increase the sound if I've well understand) and camera drivers. The most important things for me actually. But like every times for every things I've got problems x). I've seen Brazzuka's Camera Drivers, and I've tried to install it. To do that I've search tutorials, of course I've found them. I've tried "Far", but after my phone is connected, I'm said that a problem occurred and that it's not possible to connect my phone.
A picture is better than words. And after a few seconds:
So it do not work with my phone. I've tried with A2Uploader, but I had again a problem. As you can see, I've connected my phone, and after this A2uploader load, but after a few seconds it say time elapsed and ready. Nothing else.
I am trying to debrand my SE phone, using this article as a guide: http://www.associatedcontent.[....]nd_a_sonyericsson.html?cat=15. I installed all the necessary programs and drivers, created an .xml file (for generic American version), transferred it to phone, tried SE Update Service, no go. Says I already have the newest software. I tried creating a new .xml file, but this time using Western Europe instead of America. Still, Update Service says my software is new enough. Then I tried going back and creating a generic American .xml and using Update Service to reinstall my OS, but that only reinstalled the old and customized AT&T OS which is what I'm trying to get rid of. So my questions are: 1) I was sort of reluctant to debrand in the first place, but what is the worst thing that can happen if debranding fails? 2) Is there some other CDA number I can use (instead of America/W. Europe) and still be able to use my phone with my service provider? Perhaps Central or Eastern Europe?
I`m thinking of buying a Hazel. A great camera n a good audio quality are on the top of my priority . I`ve read at a lot of places n even experienced myself at a mobile store that Hazel's loudspeaker produces very feeble sound. So I was wondering if acoustics drivers are available for Hazel yet, it being a newly launched mobile phone.
Has just go the Vivaz and have a flashing envelope icon at the top of the screen. I have checked and I don't have any new messages, drafts or deleted items. Can anyone tell me how to get rid of this and also what does it mean?
please i want to flash my w595 with a2uploader and i wanted to know how to know wetha the simlock is permanent or temporal because when i check it on the phone it is unlocked but don't know wether it is temporal or permanent.
I have followed these steps: Generated CDA. Nordic language! Then followed these steps! Upload "customize_upgrade.xml" to your phone and make the CDA change. So you have generated the file and you want to get on with it? Well I'll make this as short as possible.
1. Open A2uploader. 2. Click "FileSystem Tool". Re-insert the battery of your phone then connect your USB holding '2+5' keys. Release keys '2+5' when A2uploader detects your phone. 3. Browse to "/tpa/preset/custom/". Drag and drop the "customize_upgrade.xml" file to the right pane of A2uploader. 4. Click "Shutdown FS Manager". 5. Disconnect USB cable and turn on phone. You will notice a "Please Wait" prompt. This is when the CDA is changing. When the prompt is gone, turn off your phone.
But SEUS cannot find any new firmware still? What revision should the the Customize upgrade be?
I notice a flashing red light on the side of phone. I put the phone on charge seemed to be charging ok approx 5 hours later took it off charge. I used phone and noticed the battery indicator showing 1 red bar the phone bleeped low battery and turned off. I've done all normal trouble shooting tips still the same. I've bought original Sony Ericsson charger and battery that hasn't worked either.
put it on charge last night as i normally do, then when i looked at it after about an hour, it said: Cannot Charge Battery, Please use a Sony Ericsson Battery, I still had about 50% battery so i switched it on and it goes past the turn on / flight mode menu then theres just a white screen saying please insert correct sim. The red light is also flashing.
I have just recieved a new Vivaz Pro phone. Im a novice as I previously had SE K850i which I loved but sadly has died! Today, I have spent hours and hours trying to "add" my Contacts via the Sim Card to the Vivaz. It wont work and I keep getting a Fashing Envelope to say the Sim Card is full I have 4 messages from my old phone in the message box. How can it be Full ANYONE KNOW HOW CAN I FIND THE SIM CARD WHEREABOUTS ON THE VIVAZ PRO So I have no Phone Contacts list,a phantom Full Sim Card and no Idea how to access the Sim Card details?
Got a C3-01 a couple of months ago, now the USB symbol keeps flashing on the screen and drains the battery every 24 hours. I am also getting this message on the screen....Remove cable or connect a device to continue? Any ideas as all i connect to the phone is a charger!
I bought a e5 couple of weeks ago and since I started it there is a small envelope flashing constantly in my home screen. Of course there r no sms, mms unread, didn't even configure my email address yet.
I bought a Sony Ericsson Elm on June 28, 2010. Some of the pictures taken by the camera have a red line (and sometimes another blue line can be seen) in the center. Does this depend on the lighting conditions? The line seems to appear whenever the focus is on a dark object and can also been slightly seen in lighter areas. The lines appear continuously while shooting a video. And also, when I was shooting a video the other day, the phone just froze after I stopped recording. I had to remove the battery manually in order to get the phone working. Is there some problem with my mobile or are there any adjustments to be made to make those red lines disappear from pictures?