Motorola Motoactv :: GPS Receiver Turn Off When Battery Is Low
Sep 13, 2012
Had a 19 mile training run today. The device was set in marathon mode and I was using a bluetooth headset. After mile 17 the battery was at about 20% and the tracking got very weird. The distance measure got really inconsistant and the pace was way off. When I look at the data, the elevation went to 0 and it drew a straight line from that point to the finish. The only thing I can think of was that the GPS receiver was turned off. Has anyone seen this? If this is a setting, how can I turn if off? When I finished the battery was at 10% and music playback was never interupted. I am using software version 1.7.12 N8
View 2 Replies
ADVERTISEMENT
Mar 12, 2012
when making a call i cannot hear the receiver unless i turn on speaker - how can i fix this
Info:
iPhone 4, iOS 5.1
View 2 Replies
View Related
Jan 26, 2012
It did to me, FM problem solved, battery indicator becomes more accurate, WIFI access point connection solved.I didn't even know that you can do that, just a long press on the power button.
View 1 Replies
View Related
Jan 22, 2012
I have the Motoactv 16g. Each time i begin to run the radio comes on and i want to hear the music i have uploaded. How do I turn the Fm tuner Off?
View 2 Replies
View Related
Feb 6, 2012
I'm having a complete brain fart.... but for the life of me i cn't remember where to turn off teh all day tracking option.
View 9 Replies
View Related
Feb 8, 2013
I've had my MotoActv for one week. When it first arrived, it would not turn on, but I assumed this was a battery issue. After charging it for a while, it turned on, and I had no problems. I worked out (walks/jogs) about an hour a day for the past week (no rain, only minimal sweating) and didn't have any problems with it.
View 2 Replies
View Related
Mar 27, 2012
What I am seeing is that as soon as GPS goes on the unit drops from 100% to 90% immediately. I have fully charged the unit over night using the supplied powerpack and cabling. Is what I am seeing normal?
View 10 Replies
View Related
Jan 31, 2012
I've been using the MA for about a month, I had my first issue with GPS accuracy today. I ran a 6 mile out and back upon checking my route after synching I found that the data showed me running in areas I had not obviously gone. Usually when I do a out and back the route is right on one another. This time I had two lines that varied quite a bit. I noticed my battery was down to 20% before I ran and I swithced it to collect data every two seconds instead of every second like I normally do. Also it was a very sunny/clear day. Has anyone else noticed inaccuracies when using battery saver mode? inaccuracies when not using the MA when low on battery? any success with battery saver mode?
View 11 Replies
View Related
Sep 3, 2012
This weekend I did a long cycling tour with the MotoACTV and found out where the max battery life is for me. Without running any music, BT notifications off, and minimal screen usage, I got 8.5 hours of life (7 hours riding time) over 110 miles. There was just enough power to sync when I got home, and by the time I was in the shower, it was close to 0% an in the charger.I truly thought I was going to lose the last couple hours, but the device proved me wrong. Job well done. When I first did this with older software, I ran out of power at 5 hours. Software tweaks work!
View 1 Replies
View Related
Feb 1, 2012
I've looked in the MotoActv settings, but don't see battery saver listed. I have update version 4.55.78 for 8gb.
View 15 Replies
View Related
Jun 11, 2012
I am getting a bootloader 03.14 battery low error when I try and charge my watch.
I was using my watch as a timepiece and the battery ran out, that evening I tried to charge it using the mains adapter but a warning flashed up saying 'Bootloader 03.14 battery low cannot program'
When I try and charge it through the computers usb then only the white light near the usb turns on. this then goes off after a few minutes.
I have read that someone else had a similar error that they thought was something to do with water damage but this is not the case with my watch as it happened on a dry sunny day.
I have tried leaving it plugged in for 1hr to charge, still no luck. The only thing that happens is that the watch becomes hot.
There is no other sign of life to the watch apart from the error message and/or the white usb light.
View 4 Replies
View Related
May 4, 2012
I already purchased the product and any accessories that that I deem necessary.Seeing the ad for accessories so prominently on the main portal page is at best tacky, and at worst insulting.Create a link at the bottom of the page for "MotoACTV Store" or something, but don't waste such useful screen real estate on trying to push more stuff on us.
View 2 Replies
View Related
Sep 2, 2012
how turn off the display counter of calories and steps?
View 3 Replies
View Related
Dec 28, 2011
Monday afternoon - ACTV fully charged, left on, BT connected to my ATRIX.
Tuesday morning - ACTV down 10%, went for 4 hour 30 minute outdoor cycle with music, speed/cadence, and HRM (GPS too). Left on when workout was finished
Wednesday morning - Battery at 20%, went for 1 hour outdoor cycle, same features used as Tuesday morning. When I pulled into the house, the 10% battery warning appeared on the screen.
So, I got about 33.5 hours of standby with BT active plus almost 6 hours of workouts on a single charge (never even connected it to my computer).
View 3 Replies
View Related
Mar 13, 2012
It would be nice to be able to lock any screen, not just the workout screens. For example, I like to wear the Motoactv as a watch. You can have the it dim the screen, but not go off, if you tell it not to timeout the screen in workout, and then do a walking workout. However, when I touch the watch by mistake, it goes to my timepiece setup screen. Locking it at any screen would solve this. Also, having a dim mode to save the battery for watch use would be nice.
View 1 Replies
View Related
Feb 16, 2012
I thought my battery life issues had been resolved. But i jsut recently got a set of bluetooth ( Jabra SPORT Bluetooth Stereo Headset ) headphones and noticed that battery life is back down to nothing ( 3.5 hrs ish).
I'm wondering does anyone have a rough estimate of the battery drain that blutooth has on the ACTV ? should i jsut give up and go back to wired for cycling :(
how to squeeze more juice in blutetooth mode . I'm already in marathon mode , with short screen timeout. I don't anve and ANT+ stuff going on..
View 10 Replies
View Related
Apr 19, 2012
My MOTOACTV is acting very oddly. When I plug it into my PC the charge light comes on but will not connect to MOTOCAST and no icon pops up to say that it is plugged in. I do not currently have my initial charger but when I was on with support they asked me to plug it into my LG phone adapter. When I did this my MOTOACTV turned on, and said it was charging. However the display quickly went from 5% to 20% to 60% to 100% and then the light turns off and it doesn't start charging. When I plug it in via the other charger and hold all the other buttons it starts the Bootloader which says "Battery Low Cannot Program". I used it this past weekend and it must have lost its charge...
View 14 Replies
View Related
Jun 20, 2012
I don't need my Motoactv on all the time, especially when I am sleeping, so rather than having to charge it every few days when it's on, I decided to shut it down. I held down the power button and chose to POWER OFF. That was last night around 1AM. Today, around 7PM, I held power to turn it on but it wouldn't. I kept trying to no avail. Finally, I plugged in a USB charging cable and it slowly came to life. At this point, the white charging light refused to come on (normally it's on right away).
View 8 Replies
View Related
Dec 14, 2011
I carged my motoactv to 100% yesterday, took it off charge, havent used it or had it connected to anything. thought id go for a long jog this morning and there is only 20% battery left, i guess you just cant use the device as a normal watch aswell. Keep it turned off untill you need to exorcise or have i just got a dud battery?
View 12 Replies
View Related
Jun 3, 2012
Has anyone else noticed a significant decrease in how long your MOTOACTV lasts on a charge? I can usually leave my device off the charger all weekend without it dying without using it. But this weekend I had to charge it 4 times just to keep it from turning off due to lack of battery charge. I am not using all the new Twitter or Facebook notifications and the Bluetooth on my phone was off all weekend too. I did notice that if I go to Wireless Settings my MOTOACTV shows connected to the Wifi hotspot
View 14 Replies
View Related
Jan 7, 2012
If marathon mode is set and screen timeout is set after you power down the unit and then power it up again it keep marathon mode set but looses the screen timeout selection. You have to go in and set screen timeout again before you start the run. I think this is a bug. I saw someone mention it in another posting. I wanted to bubble it to separate thread so a Moto eng could see it and hopefully fix it in the next firmware release.
View 5 Replies
View Related
May 22, 2012
However, after the latest update, the battery life, even when doing nothing, is terrible. I had it charged to 100% before I went to sleep last night and when I woke up the battery was dead and the watch was off. Before it would last a couple of days even if I went on a short ride.
I did recently pair it to a Garmin speed/cadence sensor. But the battery was dying, like I said, when I wasn't even biking.
Which brings me to my second question. I got the speed sensor because I hoped that instead of waiting for the GPS to catch up to when I am stopped, that the speed sensor (like the wired one I have on my actual bike computer) would know immeditely when I've stopped and not mess up my average speed by having the time keep tracking when I was standing still. My wired computer has pause and start down to a science. Why can't this? Why is it still using GPS for speed instead of the sensor? Cadence works fine, so I know it isn't a communication problem, I don't think, anyway.
View 1 Replies
View Related
Jun 11, 2012
I used my watch this weekend to play a round of golf. The round took about 4:15 to play and when I was done my battery went from 100% to 10%. My watch is on "marathon" mode and I left the screen on the whole time. This barely seems like enough to get through a full round of golf, is this the battery time everyone else is seeing?
2 weeks ago I ran a marathon which took me a little under 4 hours and I'm pretty sure my battery was at 50 or 60% when done. I also left the screen on the whole time. The only thing that has changed between then and now is that I upgraded to the latest version of the software.
View 4 Replies
View Related
May 7, 2012
The music during my runs randomly turn off quite frequently. I have disabled the headset controls. Could sweat in the headphone jack cause this?
View 6 Replies
View Related
Mar 26, 2012
Is there anyway to turn off the steps and calories on the clock face? I don't really care to see that.
View 4 Replies
View Related
Mar 29, 2012
Kudos to the designer who made the Full Screen Battery Meter you get when you plug it in using the wall charger after it has shut down due to depleted battery. I don't know if this has always been there or if you also get it if you plug it in to your computer after a full discharge or when you plug it in to the wall charger after you power off (without depleting the battery fully). But it sure is a nice touch - a really smooth animated battery meter that fills the entire screen for the little over an hour that it takes to charge from 0% to 100%. Well done, Team MotoACTV
View 2 Replies
View Related
Mar 3, 2012
Over the past two weeks, I have observed that my MOTOACTV has twice entered a Failure Mode in which current drawn from the battery in Standby if far higher than spec and even higher than playing music through wired headsets only. The cause is unknown, but may be related to another MOTOACTV Failure Mode - music player freak out. In the first instance, I left the unit in Standby at 70% charge and found 14 hours later that it had turned itself off - battery depleted. I powered it up, charged it and was surprised during my run to find that my SF200 wired headset line switch was functional again - the music player had not responded to the SF200 line switch for several days.
In the second instance, late on Tuesday night Feb 28, I noticed that the state-of-charge of my battery was sliding rapidly and placed it on the charger. After my morning run the next day, I charged it fully and monitored the battery. The result is charted in the image below. According to published specifications, the MOTOACTV should last 325 hours on one full charge. I have conducted extensive battery tests on my unit and have never been able to achieve a Standby discharge rate much better than 0.71%/hr or 140 hours full discharge equivalent. The Standby battery life spec should be revised. As published, it is misleading at best. In Failure Mode - Excessive Battery Drain in Standby, I measured a Standby discharge rate of 6.73%/hr or just under 15 hours of battery life in Standby on a full charge.
I do not know why my unit enters this Failure Mode. But I know I am not alone. AlmariaTeach is probably replacing his unit right now to remedy what looks like the same issue. But his device could not be cured by rebooting or factory reset, so it may have been a more advanced case. In both instances, a power-off reboot restored 'normal' Standby power use behavior and revived a non-functioning music player line switch to perfect working order.
View 11 Replies
View Related
Aug 10, 2011
After reading this forum and the "Android Forums", it is obvious many (paying) subscribers experience this problem. Intermittently, when I make a call or receive a call, there is no audio: I can't hear them and they can't hear me. However, the connection is good.
View 1 Replies
View Related
Mar 5, 2012
After running an update I found that a new app had been install called Citrix Receiver. I have looked at what this app does, as well as doing multiple google searched for information about it and it is definately something that I will never be using. As such I tried to uninstall it but there does not appear to be any way to do so. I have approached Citrix with this issue, they refered me to my service provider who then refered me to here The other part of the problem with it is that it keeps identifying that there is an update available for the app, which I have not downloaded, and whenever I try to update other apps that I use on a daily basis, skipping the update to Citrix Receiver seems to make the updates to the other apps get skipped as well.Mototola Xoom Tablet Model Number MZ601, running Android Version 3.2, Citrix Receiver App version 2.1
View 3 Replies
View Related
Jul 27, 2011
Is anyone aware of an official (or rooting-free) way to add Root Certificates to the Webtop, which will then be used by the built-in Citrix Receiver?
This was why we bought that "Nirvana"-Phone. There are visions to replace ThinClients and Notebooks with Atrix-Phones in combination with Multimedia Docks and Lapdocks for selected users. Our CIO and CFO are keen to see it in action, but all we receive is the well known SSL Error 61.
In the Webtop-Firefox the Certificates look ok and I also made it to work on the Android Citrix Receiver, but I need to be able to use the screen resolution of the connected monitor and not the phone's resolution.
[code]...
View 2 Replies
View Related
Jun 16, 2012
I don't always use the music feature when I run. Is there a way to turn it "off" and not just pause the songs?
View 1 Replies
View Related
