Motorola Motoactv :: Bootloader 03.14 Battery Low Cannot Program
Jun 11, 2012
I am getting a bootloader 03.14 battery low error when I try and charge my watch.
I was using my watch as a timepiece and the battery ran out, that evening I tried to charge it using the mains adapter but a warning flashed up saying 'Bootloader 03.14 battery low cannot program'
When I try and charge it through the computers usb then only the white light near the usb turns on. this then goes off after a few minutes.
I have read that someone else had a similar error that they thought was something to do with water damage but this is not the case with my watch as it happened on a dry sunny day.
I have tried leaving it plugged in for 1hr to charge, still no luck. The only thing that happens is that the watch becomes hot.
There is no other sign of life to the watch apart from the error message and/or the white usb light.
View 4 Replies
ADVERTISEMENT
Apr 19, 2012
My MOTOACTV is acting very oddly. When I plug it into my PC the charge light comes on but will not connect to MOTOCAST and no icon pops up to say that it is plugged in. I do not currently have my initial charger but when I was on with support they asked me to plug it into my LG phone adapter. When I did this my MOTOACTV turned on, and said it was charging. However the display quickly went from 5% to 20% to 60% to 100% and then the light turns off and it doesn't start charging. When I plug it in via the other charger and hold all the other buttons it starts the Bootloader which says "Battery Low Cannot Program". I used it this past weekend and it must have lost its charge...
View 14 Replies
View Related
Mar 27, 2012
What I am seeing is that as soon as GPS goes on the unit drops from 100% to 90% immediately. I have fully charged the unit over night using the supplied powerpack and cabling. Is what I am seeing normal?
View 10 Replies
View Related
Jan 31, 2012
I've been using the MA for about a month, I had my first issue with GPS accuracy today. I ran a 6 mile out and back upon checking my route after synching I found that the data showed me running in areas I had not obviously gone. Usually when I do a out and back the route is right on one another. This time I had two lines that varied quite a bit. I noticed my battery was down to 20% before I ran and I swithced it to collect data every two seconds instead of every second like I normally do. Also it was a very sunny/clear day. Has anyone else noticed inaccuracies when using battery saver mode? inaccuracies when not using the MA when low on battery? any success with battery saver mode?
View 11 Replies
View Related
Sep 3, 2012
This weekend I did a long cycling tour with the MotoACTV and found out where the max battery life is for me. Without running any music, BT notifications off, and minimal screen usage, I got 8.5 hours of life (7 hours riding time) over 110 miles. There was just enough power to sync when I got home, and by the time I was in the shower, it was close to 0% an in the charger.I truly thought I was going to lose the last couple hours, but the device proved me wrong. Job well done. When I first did this with older software, I ran out of power at 5 hours. Software tweaks work!
View 1 Replies
View Related
Sep 13, 2012
Had a 19 mile training run today. The device was set in marathon mode and I was using a bluetooth headset. After mile 17 the battery was at about 20% and the tracking got very weird. The distance measure got really inconsistant and the pace was way off. When I look at the data, the elevation went to 0 and it drew a straight line from that point to the finish. The only thing I can think of was that the GPS receiver was turned off. Has anyone seen this? If this is a setting, how can I turn if off? When I finished the battery was at 10% and music playback was never interupted. I am using software version 1.7.12 N8
View 2 Replies
View Related
Feb 1, 2012
I've looked in the MotoActv settings, but don't see battery saver listed. I have update version 4.55.78 for 8gb.
View 15 Replies
View Related
Dec 28, 2011
Monday afternoon - ACTV fully charged, left on, BT connected to my ATRIX.
Tuesday morning - ACTV down 10%, went for 4 hour 30 minute outdoor cycle with music, speed/cadence, and HRM (GPS too). Left on when workout was finished
Wednesday morning - Battery at 20%, went for 1 hour outdoor cycle, same features used as Tuesday morning. When I pulled into the house, the 10% battery warning appeared on the screen.
So, I got about 33.5 hours of standby with BT active plus almost 6 hours of workouts on a single charge (never even connected it to my computer).
View 3 Replies
View Related
Mar 13, 2012
It would be nice to be able to lock any screen, not just the workout screens. For example, I like to wear the Motoactv as a watch. You can have the it dim the screen, but not go off, if you tell it not to timeout the screen in workout, and then do a walking workout. However, when I touch the watch by mistake, it goes to my timepiece setup screen. Locking it at any screen would solve this. Also, having a dim mode to save the battery for watch use would be nice.
View 1 Replies
View Related
Feb 16, 2012
I thought my battery life issues had been resolved. But i jsut recently got a set of bluetooth ( Jabra SPORT Bluetooth Stereo Headset ) headphones and noticed that battery life is back down to nothing ( 3.5 hrs ish).
I'm wondering does anyone have a rough estimate of the battery drain that blutooth has on the ACTV ? should i jsut give up and go back to wired for cycling :(
how to squeeze more juice in blutetooth mode . I'm already in marathon mode , with short screen timeout. I don't anve and ANT+ stuff going on..
View 10 Replies
View Related
Jun 20, 2012
I don't need my Motoactv on all the time, especially when I am sleeping, so rather than having to charge it every few days when it's on, I decided to shut it down. I held down the power button and chose to POWER OFF. That was last night around 1AM. Today, around 7PM, I held power to turn it on but it wouldn't. I kept trying to no avail. Finally, I plugged in a USB charging cable and it slowly came to life. At this point, the white charging light refused to come on (normally it's on right away).
View 8 Replies
View Related
Dec 14, 2011
I carged my motoactv to 100% yesterday, took it off charge, havent used it or had it connected to anything. thought id go for a long jog this morning and there is only 20% battery left, i guess you just cant use the device as a normal watch aswell. Keep it turned off untill you need to exorcise or have i just got a dud battery?
View 12 Replies
View Related
Jun 3, 2012
Has anyone else noticed a significant decrease in how long your MOTOACTV lasts on a charge? I can usually leave my device off the charger all weekend without it dying without using it. But this weekend I had to charge it 4 times just to keep it from turning off due to lack of battery charge. I am not using all the new Twitter or Facebook notifications and the Bluetooth on my phone was off all weekend too. I did notice that if I go to Wireless Settings my MOTOACTV shows connected to the Wifi hotspot
View 14 Replies
View Related
Jan 7, 2012
If marathon mode is set and screen timeout is set after you power down the unit and then power it up again it keep marathon mode set but looses the screen timeout selection. You have to go in and set screen timeout again before you start the run. I think this is a bug. I saw someone mention it in another posting. I wanted to bubble it to separate thread so a Moto eng could see it and hopefully fix it in the next firmware release.
View 5 Replies
View Related
May 22, 2012
However, after the latest update, the battery life, even when doing nothing, is terrible. I had it charged to 100% before I went to sleep last night and when I woke up the battery was dead and the watch was off. Before it would last a couple of days even if I went on a short ride.
I did recently pair it to a Garmin speed/cadence sensor. But the battery was dying, like I said, when I wasn't even biking.
Which brings me to my second question. I got the speed sensor because I hoped that instead of waiting for the GPS to catch up to when I am stopped, that the speed sensor (like the wired one I have on my actual bike computer) would know immeditely when I've stopped and not mess up my average speed by having the time keep tracking when I was standing still. My wired computer has pause and start down to a science. Why can't this? Why is it still using GPS for speed instead of the sensor? Cadence works fine, so I know it isn't a communication problem, I don't think, anyway.
View 1 Replies
View Related
Jun 11, 2012
I used my watch this weekend to play a round of golf. The round took about 4:15 to play and when I was done my battery went from 100% to 10%. My watch is on "marathon" mode and I left the screen on the whole time. This barely seems like enough to get through a full round of golf, is this the battery time everyone else is seeing?
2 weeks ago I ran a marathon which took me a little under 4 hours and I'm pretty sure my battery was at 50 or 60% when done. I also left the screen on the whole time. The only thing that has changed between then and now is that I upgraded to the latest version of the software.
View 4 Replies
View Related
Aug 28, 2010
If I send my iPhone for the battery replacement program, will they send me back another refurbished one or mine?
View 5 Replies
View Related
Mar 29, 2012
Kudos to the designer who made the Full Screen Battery Meter you get when you plug it in using the wall charger after it has shut down due to depleted battery. I don't know if this has always been there or if you also get it if you plug it in to your computer after a full discharge or when you plug it in to the wall charger after you power off (without depleting the battery fully). But it sure is a nice touch - a really smooth animated battery meter that fills the entire screen for the little over an hour that it takes to charge from 0% to 100%. Well done, Team MotoACTV
View 2 Replies
View Related
Mar 3, 2012
Over the past two weeks, I have observed that my MOTOACTV has twice entered a Failure Mode in which current drawn from the battery in Standby if far higher than spec and even higher than playing music through wired headsets only. The cause is unknown, but may be related to another MOTOACTV Failure Mode - music player freak out. In the first instance, I left the unit in Standby at 70% charge and found 14 hours later that it had turned itself off - battery depleted. I powered it up, charged it and was surprised during my run to find that my SF200 wired headset line switch was functional again - the music player had not responded to the SF200 line switch for several days.
In the second instance, late on Tuesday night Feb 28, I noticed that the state-of-charge of my battery was sliding rapidly and placed it on the charger. After my morning run the next day, I charged it fully and monitored the battery. The result is charted in the image below. According to published specifications, the MOTOACTV should last 325 hours on one full charge. I have conducted extensive battery tests on my unit and have never been able to achieve a Standby discharge rate much better than 0.71%/hr or 140 hours full discharge equivalent. The Standby battery life spec should be revised. As published, it is misleading at best. In Failure Mode - Excessive Battery Drain in Standby, I measured a Standby discharge rate of 6.73%/hr or just under 15 hours of battery life in Standby on a full charge.
I do not know why my unit enters this Failure Mode. But I know I am not alone. AlmariaTeach is probably replacing his unit right now to remedy what looks like the same issue. But his device could not be cured by rebooting or factory reset, so it may have been a more advanced case. In both instances, a power-off reboot restored 'normal' Standby power use behavior and revived a non-functioning music player line switch to perfect working order.
View 11 Replies
View Related
Jul 16, 2010
Ok so I read the webpage on how to root the Aria. I am still clueless to how to do it though.How do you get the one program on a sd card, where do I get that program?Can anyone help me out. I want to get some of this ATT bloatware off of the phone to clear up some space and also to maybe overclock it safely.
View 6 Replies
View Related
Jul 25, 2012
Is it just me or is anyone having problems with data syncing to the Motoactv.com portal today?
View 2 Replies
View Related
Apr 6, 2012
I have been trying to download gold courses for 2 days now and can't figure it out.My device keeps saying "Downloading" and nothing is happening.
View 14 Replies
View Related
Aug 7, 2012
I've owned the MotoActv for two month, I got the mysterious "moisture issues" that everyone seems to be getting even though I've never used it in the rain. But the thing that is driving me nuts is the music. When I hit random shuffle of all my songs, I hear songs I don't want to hear... song that I do not own on my computer. Where are these songs coming from? Today I heard "Boot Scoot Boogie!" I abhore country music as does my wife. Doing a computer wide search shows no evidence that the song exists on my computer. Yet there it is playing in mile four. Other mystery songs have showed up too. The performance music playlist seems to be filled with songs I never heard of, yet evidently I perform well to them.
View 1 Replies
View Related
Jun 21, 2012
I haven't been able to access the motoactv portal all morning.
View 2 Replies
View Related
Feb 5, 2010
i recently tried flashing my v3m to altell. But it fail in the process and now it just shows the altell boot then goes to bootloader mode. But when trying to reflash it gets to flash group 2 and fails. I used rsd lite and radio comm. FLASH FAILED: Tx RQHW boot cmd failed. Boot Command: RQHW M-Link error 0008: DeviceIoControl() result falied during USB device I/O.
View 3 Replies
View Related
Jun 3, 2010
According to here the Milestones bootloader has been cracked. Hopefully it wont be long till custom roms! Hopefully it wont be long till 2.2!
View 4 Replies
View Related
Oct 9, 2012
my motorola droid x, stays in the bootloader screen and will not come out and sends me an error (a5, 70,70,00,1 f).
View 2 Replies
View Related
Jun 13, 2011
If Moto does not unlock the bootloader shortly for my Atrix I will be selling the phone and moving to a Samsung Galaxy S II as soon as it's available. Moto, provide a date as to when you will provide an unlocked bootloader. I know this is a hot topic, but if you can not keep up with Development then allow me as the owner of the phone to do as I wish. Take samsungs lead and send your phones to CyanogenMod
View 9 Replies
View Related
Sep 6, 2011
Unlock the Bootloader on the D3!
HTC is unlocking their phones.
View 1 Replies
View Related
Nov 25, 2011
I'm writing to ask for your favor - Please provide us, some enterprising Defy (MB525) owners, a way to unlock the bootloader.Rationale:1. You are providing means to unlock the bootloader on many newer devices already, and it shouldn't cost you much to provide us a mean to unlock the Defy as well.2. The warranty of many of our Defy devices is expiring, so even if we brick our device, we couldn't file a warranty claim anyway.3. The Defy is the 2nd most popular devices running CyanogenMod according to http://stats.cyanogenmod.com/, so we have a huge following.4. If you allow us to unlock the bootloader, we will consider it as a gesture of goodwill and will be more willing to recommend our families and friends to buy Motorola devices in future.
5. Many other manufacturers have started to unlock their bootloaders and by comparison, Motorola is doing very poorly and has a bad image in our mind.6. Many of us bought the Defy without any carrier subsidy.7. Come on! Give us a Christmas gift, okay
View 12 Replies
View Related
Sep 28, 2012
In the unlock FAQs, it is mentioned that the bootloader can be re-locked. However, I can't seem to find any instructions on how to do this. So, how do you do it? I've only unlocked my bootloader. Everything else about the phone is stock. I haven't flashed any new ROMs or anything else.
View 5 Replies
View Related
