Motorola Droid Razr :: Bluetooth Always Starts Up On Boot?
Sep 28, 2012
On my Wife's droid razr, every time the phone boots up, blue tooth starts up. It seems to start up right after the phone starts up my wifi. There are no smart action running that should cause the blue tooth to start up. If doesn't automatically start up on my razr, only on my wife's phone. Even when I turn off blue tooth before I shut down the phone, it still starts up on restarting the phone.
Are we getting it tomorrow in two days, in a week? I would assume that we would get ICS before April 4th, and but you never know. Does anybody know when the soak test starts?
Weird glitch I noticed in the first 2-3 days post ICS. Everything seems to be normal with the phone, except for the fact that when I plug it into a charger, this will automatically trigger the device to start playing the same song. The song plays all the way through once and then ends, after which everything is normal again. While the song is playing, I can't determine which program is responsible for playing the music so that I can stop it. There is no app or icon that pops up to indicate that music is being played, it's just as if the music is being conjured out of thin air. If I try playing a track on either Google Music or My Music during this time, the second track will start playing at the same time as the first, almost as if the software doesn't recognize that another song is already playing.
Again, this only occurs when I plug the phone into a charger. Happens consistently whether it's a wall charger, usb or car charger. I've been searcing like crazy through Settings and Smart Actions to see what's causing it, but have come up empty so far. Tried rebooting a few times (both hard and soft reset), clearing out the cache....everything except a factory reset which I'd prefer to avoid if at all possible. Has anyone else experienced this issue? I've been scrolling through various message boards but haven't seen any examples of this yet.
I noticed Verizon allowed HTC and Samsung to hack unlocked bootloaders for there phones already, so it seems Verizon wouldn't have a problem with my Droid RAZR getting one. The 2 phones I have been thinking about switching out for mine are the HTC Rezound and the Samsung Galaxy Nexus because they have them.
SO i was going to wipe my cache again, seeing if i have some knd of improvement. turned off the phone booted into the recovery splash page, selected recovery. And my phone just sits on the android with the red triangle then reboots.
Greetings, my phone recently froze on me, and I couldn't even reboot by holding down the power button. Instead I opted to reboot via the Power Button + Volume Down method. This forced it to shut down, but upon rebooting, the phone is now in a loop. It shows the Droid at launch, then makes it to the red eye, but after sitting on the red eye a moment, it freezes, then restarts the cycle again.
Things I have tried:
Forcing another reboot via Power + Volume Down Going into the Boot Mode Selection to use Normal Power Up Going to BMS and trying Recovery (Wiped data/factory reset) Attempted to enter Safe Mode (Didn't seem to work, cycled again at eye) Fastboot Lastly, tried launching to Tools in BMS. Same as above.
At this point I am at a loss as to what to do. I would like to not have to send this out, and to fix it here, but is it comes to that, I guess I'll take it to Verizon and see about getting it shipped out, and getting a replacement.
Oh, also this is a stock phone, the only "modifications" I had was Go Launcher and Go Lockscreen. I was, when this happened, going to check my Google Reader app, and that is when it froze on me. (Never had it happen before this)
I wanted to test booting into safe mode so I followed the directions here. I did get the "safe mode" in the lower left hand corner of the screen. But soon after that it restarted by itself and started back up in normal mode. I tried that 3 time and the same thing happened.
And only on boot / startup? I want to create a password when I turn on the Droid, but once its on - just requre the normal screen swipe to use the device (I don't want to have to enter a password each and every time I try to use my phone!)
I purchased the Moto Elite Sliver because my Plantronics Pro HD would drop its bluetooth every single time a call was answered or placed. I did a little research and found it may be related to a conflict with the 2.0 headset and 4.0 phone. Moto Sliver is BT 3.0 and was working great until this week. Now every single time a call is disconnected, the headset disconnects and reconnects. Reboots galore, problem still exists. Uninstall/reinstall Motospeak, problem still exists. Sometimes the bluetooth will not connect at all (reboot required). The Droid RAZR Maxx and the Elite Sliver are supposed to be state of the art MOTOROLA, I make a living with my phone and headset.
I upgraded a few days ago to the Razr from the X2. I noticed that the boot animation sound volume is so low I can barely hear it. Is this normal? Is there any way to increase the volume of the boot animation sound?
Before I had the Vehicle Navigation Dock, when I turned on navigation and the radio was on, the turn by turn voice went through the car radio. If the radio was off, it played through the phone speaker. Now that I have the dock, if Bluetooth is active, the voice doesn't play at all. I have to turn Bluetooth off in the phone to hear the turn by turn. This isn't optimal because then I can't use the phone over bluetooth. Is there a setting to have the voice always go over the phone speaker?
My razr connects to my car but will not download the phone book to the car. I have a original motorola droid and a htc thunderbolt and the worked fine.
Has anyone had difficulties or successes with Bluetooth tethering their RAZR or MAXX to a Xoom or other Android tablet? I have been unable to get mine to connect with each other. They recognize each other immediately, pair without issue but just won't connect.
If you've been successful in connecting them, how have you made it happen? Any difficulties or tricks you used to get them to connect?
Since the upgrade to ICS, my Droid Razr won't connect with the factory installed bluetooth in my 2008 Nissan Sentra. It worked perfectly before the upgrade but now nothing. It pairs and when I call using the steering wheel controls it turns on the phone with the correct person and calls them. However, you can't hear the phone ringing in the speaker and if/when the person answers you can't hear them. I was excited to get the upgrade but my car bluetooth is more important to me. Everything else works great but the bluetooth is a major safety issue for me as I drive a great deal. Does anyone know how to fix this or is there a way to undo the upgrade?
I have a RAZR MAXX HD with a bluetooth issue from the start. When in my car the bluetooth disconnects every one minute, reconnects immediately and stays on for about two minutes. Then again disconnects, reconnects, stays on for one minute, then disconnects. So the bluetooth is totally useless. It it illegal to talk on a phone in a car without handsfree in our state, so I have a MOBILE phone that won't work while being MOBILE.
When this happens it also disconnects service to the 3.5mm jack, so I have to make sure the Bluetooth is turned off. But when I plug it in the charge and then disconnect to leave in the morning, the bluetooth is turned back on. I'm spending more time resetting stuff on this phone. I've never had such a buggy phone. I've tried turning off Wi-Fi. The car is a 2010 Genisis, which with the old Droid phone worked perfect.
When streaming music to my aftermarket Alpine car stereo via bluetooth I constantly get 1/2 second drops in sound. It is intermittant but happens with almost every song, sometimes 1 or 2 times per song, sometimes up to 5 or 6 times, and some songs it doesn't happen at all. It does it while streaming through Napster or through downloaded music on the stock player, so that doesn't seem to be the issue. At first I thought it could be a loss of 3g or 4g signal or the Razr searching for the signal but it has happened in both 3g and 4g coverage area. So today I thought I would check it while stopped in a parking lot, and it continued to happen, I'm still in a 3g area til Dec. but thought the phone could be searching for a signal causing the drop of sound so I disconnected from bluetooth and the problem goes away, so I'm pretty convinced it is a bluetooth issue, I did not have this problem with my DX, so I do not believe it's an issue with my car stereo'e bluetooth adapter. I do not have any issues with phone calls but do have an issue with connecting to my bluetooth unit sometimes. In the settings it says paired but not connected until I click on the setting then it connects. Also, this does not happen while listening at home through the speakers or headphones whether I'm streaming or downloading via 3g or wifi.
Maybe I am trying to do something impossible, but I would like to pair my Droid Razr with my Xoom FE using Bluetooth. They successfully pair but will not connect. I basicaly want to share my phone's data without paying for the wifi hotspot or rooting the phone.
have a problem with weak bluetooth audio sound? I have the LG HBS-700 bluetooth headset and audio was very full and rich with my Samsung Charge. However, when connected to my Razr, the audio lacks in fullness and bass... In the audio effects option, there is only Phone Speaker and Wired Stereo Devices...
I've been having some trouble with my bluetooth headphones. Usually they work very well, I can listen to music and also make calls with them, but once in a while I will encounter a problem, when I answer a call, it will be completely mute. If I turn the headphone off, it will still be off. Even if I hang up the call, then my phone will now be completely mute (I can't even listen to music anymore). So I reset, and then my phone is back to normal.
New Razr Maxx and Plantronics Explorer 240 Bluetooth earpiece will not pair. The phone sees the device, asks for the 0000 but gives a pairing error as the wrong code.Plantronics tells me they only hardcode 0000 (zeros) into the headset and the phone says it is the wrong code.
I have a new installation of Windows 7 on a new computer and am having a difficult time connecting to my phone by either USB or by Bluetooth FTP Service. It appears that I can connect correctly to the Bluetooth Audio Services, but as I cannot get any music onto my phone I am having a hard time testing it.On Bluetooth installation I had two devices that were not installed correctly. Through trial and error I discovered that these two devices are related to the Generic Access Service and the Generic Attributes Service, both of which I have disabled on my Win7 Bluetooth phone properties.
I HAVE installed Motorola Device Manager with no success resolving. In fact, I cannot see where MDM is even accessible on my system: no system tray icon, no start menu link, etc.I'm new to the forum so I'm not sure if my image upload will work correctly, but in essence the phone Operation Panel in Win7 shows the FTP Service as active but clicking the Browse button does nothing. I do get a prompt on my phone initially asking for permision for my computer to access the phone, but then nothing.
My Razr is able to send each file to my other phone (Samsung S2) with bluetooth but it isn't able to receive any files: infact, the device results "paired but no connected" and refuses each kind of file. I turned off both devices and I turned on again, I paired again both phones but the problem persists: Razr sends files but doesn't receive them.No problem with my bluetooth headset.
I purchased the Motorola Full Size Wireless Keyboard (model:89451N) to use with my Droid Razr Maxx Hd to make texting and sending emails easier. The problem is that when conneting keyboard to phone the phone will restart 4 out of 5 times. Once the phone has rebooted it is connected but this is becoming very frustrating. This is the only wireless keyboard that I've tried but I hoped to have little compatability issues being that both handset and keyboard are made by Motorola.
I've been getting Bluetooth input lag when using mirror mode. I have a RII Mini Mouse/Keyboard combo which lags as soon as Mirror Mode is activated. The Mouse/Keyboard works perfectly outside of Mirror Mode. I also tried a logitech mouse (mouse only) and had the same choppy/laggy results. I tried both the RII and Logitech with wifi off, again with 4G off and again with both wifi and 4G off. This did not improve results.
I am using a mini HDMI to standard HDMI cable to connect to my monitor and TV. I get the same results on both screens. I have also tried at different battery levels with the charger connected and disconnected. This happens every time I choose something from "Select Dock Type". If I dismiss that prompt after connecting HDMI i do not have the lag (prompt is dismissed by hitting home or back button when prompted). If I do choose a dock type the lag starts and does not stop until i disconnect HDMI.
Anyone else having problems with their RAZR not disconnecting when a bluetooth device goes out of range?
From day 1 (two weekends ago), when I pair the phone to my Mercedes Benz 2008 (with 2010 bluetooth cradle to replace analog phone), and walk away the phone believes it is still connected (see status under wireless & network settings, bluetooth devices list)
This causes problems, such as when I receive calls the ear speaker is turned off and I cannot hear caller, or making calls the ear speaker is off.
When I later return to the car, the razr shows it is still paired (under bluetooth devices list) while the car says the phone is turned off. Need to power off/on to reset.
Called for support.
Verizon Tech believes that my car has a problem, the "car bluetooth is too old", can't keep supporting bluetooth devices that are 4+ years old
Motorola tech had me go to manage apps / bluetooth share / storage / clear data. Did not resolve problem. Need to try with another phone.
I've been trying to pair my MAXX to my Parrot CK3000 car kit since the ICS update with no success. Every time the phone is near the car kit, the car kit asks "Please pair device" whether the phone is paired or not. If paired, it won't connect (tapping on the device icon on the phone (under Bluetooth) produces nothing). If I forget the device and repair, I get a "pairing successful" from the car kit, but no connections, even when I make a call from the phone.
Is there a way I can force connect or get the darn connection to occur? SmartActions is disabled, in case that makes a difference. Yes, it paired and worked properly under Gingerbread.
My upgrade to ICS a couple days ago went fine and I had no problems until last night when I rebooted my phone - just cuz - and then found that the only way BT now plays without stuttering is if I turn off wifi. No problem with 3G/4G, just wifi. I've removed and added both BT devices, rebooted the device again, and it makes no difference. Also stopped Bluetooth Share, cleared data - no change. Using the LG-HBS700 and the Motorola Elite Sliver. I can make a smart action to disable wifi when I turn on BT but that's got obvious drawbacks. I'm contemplating a factory reset but hate to do that if I don't need to.
Since the Ice Cream Sandwich Update, my Jawbone Icon Headset cuts off while my Mobile HotSpot is on. The Jawbone headset will go on and off until I turn off the HotSpot. No one at Motorola can fix the problen.
My bluetooth works fine on other devices, but, I am having issues connecting to my car's built in system. Has anyone run into similar issues? The indicator on the car comes and goes (it has paired) but, the call button on the car won't work. The car and phone seem to be fighting each other because the strength signal on the car goes up and down and then intermittantly off.