Just started happening today. I go to lock my phone and it does nothing. Still powers off if I hold it down, but won't lock screen.
Also all of my quick toggles disappeared from my notification center. Just left blank grey spaces. Tried setting them up again, but no go, still blank spaces. Restarted phone and that didn't work. Hard reset is completely out of the question.
AT&T 1520 with dev preview, cyan.
Just as soon as this posted the toggles were back. Not sure what happened there.
My Nokia Lumia 1520 power button has suddenly stopped working. Things I have already tried are soft reset and hard reset without luck. I don't have the chive app installed which was supposed to cause this issue sometime ago. Also, I can do a soft reset - which means the power button works in some situations, just not with normal on/off operation.
The lock screen button in my Lumia 1520 is not working. I cannot unlock the screen by pressing it but I can switch it off by holding it for a few seconds. I already did a couple of soft resets but the problem is still there. I can't do ah hard reset at this moment.
Use double tap to wake up phone (enable in settings, touch menu) and install Touch and Lock and pin to your start screen to tap and auto lock. I pin mine on the right hand side right near where the power button is located. Easy to tap quickly. Touch and Lock | Windows Phone Apps+Games Store (United States).There are other touch lock apps but some have a pause or splash screen before locking. Touch and Lock is instantaneous.
When I lock my SGS II i would expect all the buttons to lock! However the power button function remain active and its far too easy to accidently power off my phone or set it into flight mode.Does anyone know how to disable this "feature" ??
I was restoring my lumia 1520 with the windows device recovery tool back to version 8.1. After the phone had gone into the flashing mode with the red screen and progress bar, the device recovery tool stopped and I got an error in the log: Flashing failed with error 0x00040010.
I hard reset the phone with the volume down + power button. Now the phone will not turn on at all. No backlight on the screen and no vibration to confirm it is on. The battery was on 90% before it failed.
I have also tried volume down + plug in charger + power and still nothing. I am think that maybe if I open the phone and physically disconnect the battery, this could clear anything that is stopping it.
Dont know if anyone else is experienceing this issue but i can no longer use the power button to lock my phone. I cannot even use it to turn the phone off. but if the phone is off i can use it to turn the phone on so i dont see this as being a hardware issue at all. If anyone has experienced this or knows a fix please reply to this thread.
I have problem with waking the phone with power/lock button. Every few hours (for my usage once a day) the phone doesn't wake after locking. I have to press and hold power/lock button for a few seconds to manualy restart it. I know that N5 has notorious problems with power/lock button but as far as I know its problem with phone not going to sleep. I don't have problem with that.
I noticed this after an update to M. I am on XtraSmooth 29.10 build with RacerKernel 28.10. DT2W dissabled. Also i have the usual problem of turning screen on after calls. For me the phone sometimes doesn't turn on until the other person ends the call. Do I need to replace the power/lock button?
I just got this yesterday and am very very happy with the phone. However, something has my OCD going and that is a click from the speakers when hitting the power button to lock the phone or to unlock it. It also clicks if there is no lock screen.
On my Lumia 950, it will reset when I hold down the power button for 10 seconds but this should only happen when holding down both the volume down button and the power button at the same time. My Lumia 920, which is also running build 10.0.10586.29, can have just the power button held down and once I swipe away the power off prompt, it works normally and stays on just like I want.I would like to use my Qi enabled car mount but it needs to push down on the power button, causing it to constantly restart.
I have a Samsung Galaxy S5 updated to Android Version 5.0 (KitKat).
Currently when I press the Power Button, the screen goes black. But it does not lock the screen.
I have the screen lock set to 30 seconds. But even so, there are lots of times when I have put the phone in my pocket and it accidentally it the home button before the 30 seconds is up and random apps get launched as my phone bounces around in my pocket.
So I would like to be able to press the power button and immediately have the screen lock. I was able to do this on my original Galaxy Nexus. But I cannot figure out how to do this on my Samsung.
I did some google searches and I found many many posts that said "go into settings, select lock screen, scroll to the very bottom and click the option to enable lock on power button."
The problem is, when I go into the Lock Screen settings and scroll down to the very bottom, I don't see any such option. So, how to enable the Power Button to immediately lock my phone?
If I make an app at apple will they fix it with no charge or replace my phone? I have to drive an hour to the nearest store so I don't want to make the trip for nothing.
I'm running .428 and my storm and I know there are lots of threads on the button issue. Mine all stopped working Friday after a dip in the ocean. Next day the bottom 4 started working again but the power/lock still does not work. It clicks but nothing else. And the keyboard is so soft. Oh and about 5 auto shut offs. I have to battery pull just to start it again.
I am a brand new user to Blackberry so I still don't know all the ins and outs, I'm hoping someone here can help me out.I have a Storm2 that is about 2 weeks old, it has been working great up until yesterday when the lock screen button just stopped working. I am referring to the method of tapping the power button on the top left to add and remove the lock.The power button still works to turn the phone on etc, but just wont lock the screen. As you can imagine this makes life very difficult with a touch screen phone.
I'm currently facing this problem and it's really annoying. I never update my phone or whatever because it will slow it down.
My phone went out of battery and it turned off. So i plug the charger in and waited for it to restart. After restarting it, I realize there are several settings that ran away IE: My ringtone preferences and keyboard preferences. So far, I've already readjust it, But ever since the phone restarted like that, I can no longer lock my screen, not even if it times out itself after 15 seconds. and when i press and hold the power off button, instead of showing the menu for options like "Silent phone"/Flight mode"/"Shut down" it only shows power off. What can i do to get the original settings back ?
My iphone 4 is fairly new, I have been using it for about 2 months. It has been perfectly fine besides a bit kinks here and there, the usual things. But today my lock/power button randomly stopped working for me. My fone wont lock at all. I did shut it off by holding the home button and the lock button, but then I couldn't turn it back on, with the reason being my lock/power button will not work. It is not jammed nor loose.
I keep pressing the power button whilst holding the phone. Is it possible to disable power button? Also why is there a long space/gap? like the above when I type
If my curve 8900 is any indication, the dedicated buttons at the top wear out and start getting unresponsive pretty quick. I'm afraid if the lock button on the Storm2 wears out, I won't be able to unlock it (with the curve I could use the keyboard * + green call button to unlock).Is there an application or similar that allows me to unlock the screen by an alternative method?
This morning the screen of my Z5 Compact starting coming back on after I press the Power Button to turn it off. It seems to be triggered by movement: If I'm holding the phone after pressing the PB, the screen comes back on immediately when my hand moves. If I place the phone flat on a table and press the PB, without additional movement, the screen stays off.
The screen stays off if allowed to Sleep past the set duration.
The past couple of days I've also been getting notifications that certain Apps are preventing Stamina mode from operating. This morning it was Facebook. Yesterday, it was another one I can't remember. Can these issues be related?
I've recently had my phone reset to factory settings. I've gone through and installed all my apps etc back on to it and updated the software to the current build (all stock, and not rooted).
I have had 2 issues with it, the first being not being notified of emails from the gmail app - sync was ticked, as were the relevant labels...still didn't get any notifications through. I read somewhere that if downloaded the gear app (for smart watches) it would resolve it - it has seemed to, even uninstalled the app and I'm still receiving notifications.
The 2nd issue is around the fingerprint lock. If i leave my phone to time out, the fingerprint scanner lock works as it should do. If I lock the phone with the power button, it bypasses the fingerprint scanner and only locks it with a swipe.
Before updating / factory reset it worked as it should do.
I've had issues on WP 8.1 and 8.1 DP where the lock screen will jitter when attempting to unlock phone by sliding up. It doesn't always happen but enough where its worthy of complaint.
I use the alarm clock function on my BB 9550 and have been noticing the alarm does not ring if the screen is locked (i.e., using the power button function on the top of the device). Specifically, there is still an alarm notification on the screen (to dismiss or snooze), but there is no sound. That's a problem. Seems to work fine if the screen is unlocked.
This just became a problem with the upgrade to O/S version 5.0.0.607. Before that I noticed that the alarm would only be a low hum if the screen was locked, but now there is nothing at all!
everytime when you press home button to activate the phone, you need to drag the lock icon at bottom to right hand side in order to operate the phone function, pls advise how to elimenate this process? can just press home button & go straight to choose call phone or write message or music
I'm running the latest Dev preview so I have Cyan. I had an event on my calendar for last night. It starting showing the day before, awesome, but today it won't go away. I even restarted the phone, no dice. Deleted yesterdays event from my calendar, still there.
Having issues with the lock screen and calendar events with Cyan? I did a hard reset after doing the Cyan update and I did not restore from a backup. Also my calendar item in question was one I put into my phones calendar and does not come from my sync'd email account calendar or anything.
use the camera button to give it life and have to wait till the auto screen will take effect to shut it downsomebody else had or is having the same problem?
