Xperia Z5 :: Screen Coming Back On After Pressing Power Button To Lock
Jul 3, 2010
This morning the screen of my Z5 Compact starting coming back on after I press the Power Button to turn it off. It seems to be triggered by movement: If I'm holding the phone after pressing the PB, the screen comes back on immediately when my hand moves. If I place the phone flat on a table and press the PB, without additional movement, the screen stays off.
The screen stays off if allowed to Sleep past the set duration.
The past couple of days I've also been getting notifications that certain Apps are preventing Stamina mode from operating. This morning it was Facebook. Yesterday, it was another one I can't remember. Can these issues be related?
I would want to bring an issue to Sony's and all the Z2 users' notice that I am trying to observe a display burn in issue on pressing the power button while unlocking the phone a lot of times and this usually happens when I have set the brightness to adaptive. When I press the power button to unlock the screen, the colors burn for a second and the backlight comes to life with all the real colors the next second.
Its been happening quite a lot now and now I am atleast able to figure out that adaptive brightness is the culprit here. I am not sure is this another bug that sony needs to fix in lollipop or what it is? But just to mention, I have recently clean formatted my phone using the repair phone method on Sony PC companion and it has not worked to solve this issue. Lollipop is seriously making life bitter in a lot of ways than being sweet atleast for Z2 users like me. We would love to see the almost flawless Z2 back as it was on Kitkat 4.4.4.
I have problem with waking the phone with power/lock button. Every few hours (for my usage once a day) the phone doesn't wake after locking. I have to press and hold power/lock button for a few seconds to manualy restart it. I know that N5 has notorious problems with power/lock button but as far as I know its problem with phone not going to sleep. I don't have problem with that.
I noticed this after an update to M. I am on XtraSmooth 29.10 build with RacerKernel 28.10. DT2W dissabled. Also i have the usual problem of turning screen on after calls. For me the phone sometimes doesn't turn on until the other person ends the call. Do I need to replace the power/lock button?
just got the moto x 2014. How to sleep the screen without pressing power button. In that case the power button, which BTW is kind of fragile, will be free. Any virtual button we can set?
I am having trouble with my HTC Wildfire S since when I press the power button, the touch buttons switch on but the screen remains black. In order for the screen to appear, I either need to touch the screen or else wait for a few seconds until something comes up.
Having issue when pressing the power button, the lockscreen will come back on for about 3 seconds and then turn off again. I can't figure out what is causing this to happen.
I'm currently facing this problem and it's really annoying. I never update my phone or whatever because it will slow it down.
My phone went out of battery and it turned off. So i plug the charger in and waited for it to restart. After restarting it, I realize there are several settings that ran away IE: My ringtone preferences and keyboard preferences. So far, I've already readjust it, But ever since the phone restarted like that, I can no longer lock my screen, not even if it times out itself after 15 seconds. and when i press and hold the power off button, instead of showing the menu for options like "Silent phone"/Flight mode"/"Shut down" it only shows power off. What can i do to get the original settings back ?
My partner's Xperia Play decided not to boot this morning. (It was fine at 7.30 but by 8.30 it was dead). On pressing the power button, it vibrates for a few seconds but does not show any other sign of booting. He has tried removing the battery to boot it but to no avail. When he plugged it into his laptop, the machine failed to recognise the device. It just continuously made the device connect then device disconnect sounds. The laptop is only a couple of weeks old so I highly doubt that it's an issue with the USB ports. It does not detect the phone long enough to perform an update. Is it possible that the USB cable is faulty, or the USB port on the phone? Or could it be a compatibility issue with the laptop?
I just found that it's not just OS6.It's better on BOLD because pressing "end" button while in Standby mode will just wake the device.Is there Standby mode in OS6? on Torch? When you are composing email/txt msg, once you touch the "send" icon on touchscreen the msg will just be sent immediately. I hate this because I might hit it randomly. Is there any way to add a confirmation window there?
I want to be able to only lock my blackberry by pressing the top left lock button and not unlock it when i press it again. This is extremely annoying. Can anyone help me?
Since yesterday this phone is showing black screen with passcode dots & message as "Emergency calls only" at the bottom & battery status on top. When I swipe passcode dots screen is only black. When I connect to PC with USB Phone is detected but I cannot access phone or SD Card. PC Companion cannot detect anything.As for incoming Calls people say they get message as mobile switched off.I feel sorry that I did not go thru discussions in this forum before buying this costly mobile.Can I get free replacement or can I have different model in place of this mobile?I am ready to pay the difference of price if it is on higher side.
I keep pressing the power button whilst holding the phone. Is it possible to disable power button? Also why is there a long space/gap? like the above when I type
I have my iphone 4s since last November. Even if I press the home & power button at once for more than a minute, I do not have any response, could you know what's going on with mi phone?
Dont know if anyone else is experienceing this issue but i can no longer use the power button to lock my phone. I cannot even use it to turn the phone off. but if the phone is off i can use it to turn the phone on so i dont see this as being a hardware issue at all. If anyone has experienced this or knows a fix please reply to this thread.
My C7 froze to the point where it was necessary to pull out and reinsert the battery.
Unfortunately now I can't turn it back on. Pressing POWER button triggers vibra, but the screen remains dark and nothing happens after that.
I tried removing the batteries, plugged it in the wall, removed SIM card, I also tried hard reset key combination suggested in in this thread (Volume Down + Camera Key + Menu Key and press power button).
On a general note, the phone was freezing a lot. I noticed that especially when trying to connect to my work wlan (not very stable hot spot).
I got used to end calls quickly that way in Android 1.6 and it worked pretty well for me for several moths. I actually found it a very good idea, one of the best and most intuitive since I started to use it.ow I often do not end my calls properly and that cauese me a lot of trouble. Local SE customer support told me that it is a firmware matter and cannot be changed. Isn't there any HW buttons configurator or another way to configure the HW buttons on the phone?
My iPhone 5's lock button keeps 'pressing itself' whilst I am using my phone. For example if I open my phone by pressing the home button, my phone will screen shot my home screen, as if I have also pressed the lock button which, of course, I haven't. Also, when I am using my phone it will just stop and go to the screen which says 'slide to power off', again as if I've held down the lock button.
I use the alarm clock function on my BB 9550 and have been noticing the alarm does not ring if the screen is locked (i.e., using the power button function on the top of the device). Specifically, there is still an alarm notification on the screen (to dismiss or snooze), but there is no sound. That's a problem. Seems to work fine if the screen is unlocked.
This just became a problem with the upgrade to O/S version 5.0.0.607. Before that I noticed that the alarm would only be a low hum if the screen was locked, but now there is nothing at all!
I have recently bought a galaxy S6 T-mobile black sapphire and been using it for 2 weeks but the back button starts pressing itself randomly and everything just back out to home screen. I couldn't do anything else except for accepting calls.
I scanned through the web and found some has encountered the same issue but I haven't found a real solution. I'm actually new at rooting and flashing things to phone. My phone is unlocked and rooted. I did things like - factory reset and asked someone to flash the stock rom for me but the ghost pressing is still there so i'm thinking that i should completely the back button and use an app for replacement. However I don't know how to disable the back soft key.
everytime when you press home button to activate the phone, you need to drag the lock icon at bottom to right hand side in order to operate the phone function, pls advise how to elimenate this process? can just press home button & go straight to choose call phone or write message or music
Not sure if this is a Windows 10 Mobile problem or a Lumia 950 issue.
When using my Edge or UC Browser I find that each time I press the BACK button on a page it sends me to the top of the screen I was previously on.
With my 920, and desktop browsers, when I press back it takes me to the location of the screen I was previously on. This is a huge inconvenience when the page I am browsing is long and I then need to scroll all the way back down to get to where I was before.
I also notice this to be the case on the Microsoft Sports app. The News app works properly but the Sports app, Edge, and UC Browser all exhibit this irritating trait.
When I lock my SGS II i would expect all the buttons to lock! However the power button function remain active and its far too easy to accidently power off my phone or set it into flight mode.Does anyone know how to disable this "feature" ??
does any one notice that pressing the Call / Green button is a little more stiffer than pressing the Call End / Red button? are there any other experiences ? currently running tanks newest hybrid
Long pressing the Power Key to capture the screen shot or any other purpose, my mobile starts playing ringtone. I dont see any option to stop it. The only option is to restart the phone.
So i have a 2 month old sony z3 and the power button suddenly became unresponsive, today. Everything else is working fine on the device.
The screen begins to dim and then sleeps but instantly wakes up. So basically the device screen is on all the time now. I think I've tried everything i could.
So. My Xperia is on (I can hear the notification ringtone go off whenever my phone gets a text message or a Facebook message) but it won't respond when I push the power button to light/wake up the screen. This started happening at 9PM and it is now 1:30AM. I don't know what to do.
I lock my bb my pressing the top left keypad lock button but when I press it again to unlock it it won't unlock!! The only way to unlock is to take the battery out and put it back in! It only started doin this yesterday.
