LG G3 :: Screen Goes Blank During Call Cannot Access Dialpad Or Turn On Until Other End Hang Up
May 12, 2015
LG G3
For a month or so now, it is difficult to start the main screen with the double tap so could be an issue with touch screen, although once turned on with power button, using touch screen is fine. It's just that initial double tap to turn screen on that is tough sometimes.
When I get screen on, can use speaker or not, and i can use dialpad to dial, say for instance to get to voicemail. However, once dialed, the screen goes blank and I'm not able to turn it on by double tapping, by using power button, etc. The only way to get back to using my phone is when the other side has hung up. Then I can start using power button again.
I don't hold phone near proximity sensor, I don't think it's dirty, I don't use a case. I will put the phone down on the table flat and it will stay on. I then move my hand over it starting at bottom and when it gets a little ways from the top, it goes blank. When I remove my hand, with nothing in the way, it stays that way and I can't do anything.
I'd like not to try the next step which is factory reset and backup, as I have not done that before and really don't want to reinstall everything.
Randomly, say one in 10 times, when I hang up a phonecall on the Iphone 4s, my flashlight comes on.I checked the accessibility settings and they are all turned off. I don't want to upgrade to the latest OS?
I'm having a problem with my galaxy s6, the Dialpad isn't working during a phone call.
For example, when calling my local poker room it says "press 2 to connect to the lobby" when I press 2 nothing happens, I've tried multiple and even 800 numbers and no luck
Recently wiped cache partition, hard reset nothing it working.
N96 was working fine until two weeks ago, hasnt been dropped or damaged so i can only think its the update of software.i have reset it and still i have the same problem.If I slide open to answer calls or messages or use the menu's by opening it as if to use the media player (ie slide down) it works fine. If I slide up i get a blank screen and it takes absolutely ages to get the menu n screen When a call comes in screen goes blank except for a few lines (top middle)
My 950XL goes blank when making a phone call. I understand for it to go blank (may be) but if the call went into answering machine I cannot wake the phone up to hung up.
I just bought my Nokia 5530.There are a couple of problems I have been having though- sometimes when I am making a call and want to end it before the person answers, the screen becomes unresponsive. Also sometimes when I am in the middle of the call and want to access the dialler (for typing in an extensions for example), the screen does not automatically come back up from its 'dark mode' and the only way i am able to end the call is turning it off completely.Is there something I should do to prevent this, or is my phone just defective? Help is needed because I think my local warranty is going to be up soon!
I have updated my phone firmware recently. The screen slide unlock feature is cool.... but most of the times, the screen goes blank when I receive a call making it difficult to figure out the caller before I receive the call.
When i dial the number and then as soon as i press the call button, the screen all sudden goes black. I mean the call is still in progress you can hear it but you can't see anything on the screen. For example, i had to turn the speaker on for the conference, but i couldn't do it because i was not able to see where anything were at.
Why the screen goes blank on Z5 Compact AFTER a call has been connected. I'm fed up having to redial over and over. My phone HAS the latest software update.
Sometimes when I am making a call or accepting an inbound call, I will try to hit the speakerphone button (because I have a lot of trouble hearing the speakers in regular mode), only to have the screen go blank before I can do so. Sometimes it will come back after a moment and let me use the touchscreen, other times it will stay off for a while.
Ever since I have updated my X10 to 2.1 my screen goes blank after a call.i can speak on the phone but when the call finishes my screen gies blank and i have to take out my battery to turn it of.
So i came off my phone 1am & everything was cool, during the night i noticed it seemed to be booting up as if it had been battery pulled. When i got up it was still doing this but the progress bar gets a quarter of the way then the screen goes blank & it starts again. It has now been about 8 hours & its STILL doing this. Whats going on & how can i get my phone working again?
Whenever i receive a call or make one, the screen goes blank and i can't see the call time, who it is and the screen becomes none responsive and won't light up to let me finish call. Then when other person hangs up, i can't see anything on the screen for a good ten mins. is it settings?
i have a bb curve 9300 and its randomly stopped working. The screen wont turn on and it just black, but when i turn it on the red lights comes on and the keypad light, so the phone is clearly on. I thought it was a problem with the actual screen so i got new one and got it put it instead of the old one. this did not fix the problem and the screen still will not turn on.
i dont believe i have seen this mentioned so if it has i will close my own threadanyway about 20% of the time maybe less i will get a call and it is ringing but the screen is off. i have to hit the wake button and then it shows the call as
I turned my phone off and now it wont turn on. I tried to reset and nothing happened. I have also tried to force it into recovery mode and the screen is still just blank.
I was loving the phone tll the screen started to freeze black during call. I tried all the buttons with no joy and the screen remained black after call. I had to remove the battery to reboot, this reset my time and date to 1980!
I've got to try using my phone for work today, old spare being repaired. I can't even hang up a call.
My husbands phone has just stopped working has a blank screen won't turn on or charge etc. Is there a way he can get all his contacts and pics off it. It doesn't have a passcode on it.
Why can't Nokia 5800 xpressmusic include the alphanumeric keypad on the home screen dialpad. It's really annoying when you can't type in 1-800-comcast or something like this. Not sure how can we give them the feedback of including it in the next firmware upgrade.
I wanna mention some troubles with double tap feature, whenever I take my z5 out of pocket while this feature is turned on, I see that phone screen is on and some numbers tapped by emergency dialpad, also sometimes I see wifi or bluetooth is on though they were off...
also I got yesterday a c5 ultra at half price of z5 but surprisingly I realized c5 is much more stable smooth than z5.. Z5 is much more laggy in menus contacts apps etc than c5 which is faster and more lag-free.....What is the reason of this? Why laggy phone two times expensive? Should we wait for an update or android 6 marshmallow to get a ultra fast z5? The most important thing for me is fast transition between screens, I dont care high graphic games, 8K video record, 85mp camera etc but as I said performance of z5 not so well currently.. Why a highend phone cant handle even menu transitions..
My iPhone 4s buy no yet 1 month already hang, I go normal h.p shop re-install. After half month hang again, send back s'pore apple shop maintain 3 week. Buy until now around 3month hang again!
I've a problem with my E72, When I try to answer an incomming call the mobile hangs and doesn't respond to any key also the turning sensor is not functioning..the software is up to date & don't know how to fix this !!
After I downloaded the new OS months ago, I noticed that every time I hung up the phone, it locks and I have to enter my password. I tried to disable my password function I can't do it either.
When I was talking to her this morning, she hit end call but I was still able to hear her. Obviously, the call did not end when she pressed end call. So, I ended the call on my phone. She called me back 45 minutes later from a land line and said that her iphone still said she was on the original call with me. It showed we had been connected for that entire 45 minutes, and the time was still counting upward.
I had her restart the phone and that ended the call. When she called me back a little while later, I had her end the call, but I could still hear her after she hit end call.
