Just got a VZ HTC Ozone. I have it all up and running with a CDMA reseller and it works fine there.I can pull up the MEID and IMEI no problem.I have inserted my T-Mobile SIM card.When the phone boots, I get the following message:SIM lock in upper left hand corner "The SIM card is not valid. Please insert Verizon SIM card. Device will default to CDMA mode."
Only option is to click OK. Then you end up in CDMA mode. You can select GSM only but then show no service although the SIM ID shows up when you go for information on the phone.How do I get this phone to SIM unlock mode so I can get a code from an unlock vendor?This phone was never activated on VZ so not sure they would help me out.
I just simply haven't been able to figure out a couple of things:
1) When I dial a number there is an annoying beep when I press the call button. I can't figure out how to disable it.
2) I can't seem to "lock" the ring volume controls. I set it for a low volume ring but somehow it keeps resetting itself to ring loud. How do I keep the ring volume at the level I set it? TIA.
I have an HTC Ozone that I flashed from WM6.1 to WM6.5 using the official ROM that was released.Before I flashed to WM6.5, I had put PHM RegEdit on my Ozone, and did the DISABLE SMS SENT MESSAGE mod.After I flashed to 6.5, the Message Sent Notification popped up after I sent a text, so I went back in with PHM, and low and behold, the mod is still the same. I tried changing it back to 0 (Default), and instead of just keeping it on, it started popping up 2 Message Sent Notifications. So, I tried setting it to 2, and nothing, just the regular Notification. And now it's set at 1, which is supposed to turn it off, but it keeps popping up.
Did I eff up something in the registry when I flashed to 6.5? Is there some way to fix this so I can turn off the stupid notification? Or will this hack not work with 6.5?
HTC Ozone. No data cable with device when I bought it. Have 3 or 4 mini usb cables here. Does it matter which one is used or can any be used as long as it connects? Also, will the motorola razor car phone charger work with it? Don't want to damage the phone if there is some weird proprietary thing going on.
I have just purchased this phone. Is there any way to change the theme on the phone? I have downloaded .tsk files to change the theme but it will only change the scheme and nothing else changes... Am I doing something wrong or is it just not possible on this phone? Any help would be appreciated, I have been trying different things all morning.
I have a htc ozone.On prior wm phones i have owned, whenever i added a new application, it was very easy to show the new app's icon on the home page/menue.However, on the ozone i can not accomplish this.I am able to see the new application after i hit the start button.I would like the new application to be visable from the home screen (thus not having to make an extra click on start).
I have just received an HTC Ozone VX6175 and would like to know if it is possible to enable field test menu to set HDR preference to 1x only. I don't do much web browsing and would like to keep EVDO off until necessary. Been trying to find a way for hours now
I am trying to get the long date format e.g., Saturday January 23, 2010, to show on my home screen.Even though it is available in settings, my date consistently shows up as DD/MM/YYYY.How can I get the long format to show under the time?
OK, the whole point of locking your device is to keep people from seeing your info or using your phone, right? So why does my Ozone show new text messages on the screen when the device is supposedly "locked"? Is there a way to not show that info?
is there a way to use music on my storage card as personalized ringers for people in my address book?i originally had the music in the "my ring tones" folder stored on the phone but it takes too much memory so i transferred it to my storage card and now i cannot access it to assign it.
I have a brand new ozone that I need to program for Pageplus. I need to dial *22890, but I can't dial. The phone prompts me to hit the send key which dials *228, which does me no good. Is there any way to make this thing dial the number I need?
When ever I try to unlock (dragging lock button from left to right) , I am unable to unlock in one go. It is taking multiple attemts to unlock my phone.I also observed that when I get to call, to cancel dragging the icon from right to left this is required multiple attempts.i.e many time dragging icon from right to left.
I don't know whether it is software problem or hardware. I have tried the repair operation also. my xperia neo is uptodate and running 2.3.4 os.I also tried to un install apps but I couldn't find any difference.Also once I unlock, those 5 screens, I can scroll inbetween and can touch home button. But when I long press on the screen to add widget/folder I am unable to do it as soon as I unlock phone. It is taking some time to respond.
As I purchased this phone in UK and using it in India, I am not sure how much service I can get in india from SE.I have bill for the mobile too.in other posts somebody told me to remove yahoo and i did the same but didn't find any difference.in short the touch scence is not responsive during unlock and for a while once get the home screen. I also installed andvance task killer app and killing apps frequently that also not making any help.
I set a screen lock code today and used it several time with no problems. Tonight the unlock screen shows 'Enter Password to Unlock' but when I enter the pin code, it will not unlock.
I have the 8 digit network unlock code for my Atrix2, but when new carrier sim card is inserted it doesn't say sim not provisioned, and doesn't provide text box to enter code.Instead it gives me phone and text service but not mms enternet
I lock my bb my pressing the top left keypad lock button but when I press it again to unlock it it won't unlock!! The only way to unlock is to take the battery out and put it back in! It only started doin this yesterday.
I am having issue where phone will not come out of lock screen. Buttons light but screen stays black. I can reboot and use phone so I know it is not hardware. I can still blindly touch screen and maybe get past lock but stays black til I reboot.
I was searching for topics related to this topic, describing the diference beetwen manufacture unlock vs bootloader unlock. I bought an unlocked Atrix in AT&T, so I could use it at any company or overseas. Is this mean the bootloader is also unlocked? Or these are diferent things?
I remember my z2 was able to set the bluetooth unlock range between my phone and my smartband at android 4.4, but this function seen gone in android 5.1,i can unlock my phone in android 5.1 with any range just need the bluetooth connected.
I have my phone set to fingerprint unlock but it says to swipe to unlock. Only after I restart it it asks for my fingerprint. I want it to stay fingerprint to unlock.
I've recently moved from Orange to O2 and my iPhone 3GS doesn't recognise the new O2 SIM card. Orange told me that they would send me an unlock code from Apple a month ago. Talked to Orange today and they say I need to get it from O2 but O2 say that's not the case.
My iphone4 had been allowed to unlock by AT&T but I still can't unlock by chinese sim card.More than three AT&T staffs told me than my iphone4 had been allowed to unlock and sent me instruction on how to unlock my iphone4.First,I had tried to put the AT&T sim card in the iphone4 for active the iphone,then I change the chinese sim card in the iphone4.but still fail.My iphone base-band is 02.10.04.Is question from it?
I buy from best buy with full contract price ,i want to permanent unlock but i cant create att account because i have not any linked account to create att acount
my touch screen cracked after I droppet my Xperia Mini Pro on the pavement. I can still see everything on the screen, but when I try to unlock the phone by sliding the touch screen, there's no reply. The keyboard however works fine, so what I'm wondering is if there's any way for me to use the keyboard to unlock my phone?
Is it me or is "Swipe to unlock" rather slow as missing tap to unlock already?Prefer not to use spring loaded "lock-key" as probably first component to fail!f I've helped in any way, a click upon the white star at bottom right of screen would
i'm from Germany and i've bought a new Apple iPhone 4s from the Provider Orange from France. They told me there, that i can't use my iPhone with my German card because it have an simlock.When i pay Money, they can send the IMEI to Apple and i can unlock my iPhone. So i did. They said also, that i have to wait at least a week till ten days. So, thats the 15th day and i'm Angry that i cant put till now my card. How much i have to wait ??? i Cant wait anymore, i paid a lot of money with my trainee money. Sorry for my not perfect Englisch, but how i said, i'm from germany. ´
I have a Bold 9700 which I got unlocked to work on the FIDO network. The phone and SMS works fine but my BB services does not. I called Rogers and they said I need to unlock and deregister my PIN for it to work on the FIDO network.
i want to unlock my 3GS so i can sell it. I was wondering what the appropriate steps are to do this. I have a launch 3GS so it has the older bootrom (or whatever, haha). 1)unlock/jailbreak firmware 3.1.3 with sn0wbreeze 2)restore to unlocked firmware 3)do NOT restore any personal info 4)take out SIM card and sell? is it as easy as that? i have never unlocked or jailbreaked my stuff, but i want to do it because it increases the market value of the phone apparently.
