So just in the last few days my phone has started having some issues. I got a Powerbot wireless charger(PB1020) about the same time I got my phone at release. It's worked fine , and still does as far as I know. But know, after my phone is fully charged, when I remove it from the charger it's pretty warm(this is a new development, not really had it get very warn on the wireless charger before) and then it begins to connect and disconnect from the wifi repeatedly. I'm talking like every second it switches. I keep seeing people saying to turn off Smart Network Switch, but I did that the second day I had my phone, and it's still off, so obviously its something else.
My wifi keeps disconnecting from my ap (no internet esp8266) all my other devices have no problem keep connected.. is something related to network switch i think, but in settings is off..
So I have had an iphone 4 for years now, its jailbroken and has been my main phone forever. However I needed an upgrade badly, so I purchased an unlocked galaxy s6. I have so much data on the old iphone I must move, contacts, pictures, music, and I dont use icloud. So I purchased an otg cable, which worked perfectly for transferring data off of my ipad, but not my iphone.
When I connect the iphone to my galaxy, it pulls up smart switch. However it stays on the "connecting to ios device" screen. When I pull the notifications bar down on my galaxy, it says "camera connected". So my question is how can I prevent my galaxy s6 from recognizing the iphone as a camera, so smart switch can connect to it to transfer my data?
As most of you are familiar with Samsung's latest iteration of Samsung Kies, the Smart Switch, it is able to "unroot" most of the rooted devices including the Galaxy S6 (Tried it with my rooted G920F). By using the function somewhere in the "Emergency software recovery and initialization" tab, it will opt the user to upgrade/reinstall the existing software therefore unrooting your device.
My question is - how about using this method to remove the custom recovery (i.e. CWM or TWRP), thus reverting back to stock recovery?
So after installing xstrestolite custom rom, Smart Switch on my pc doesnt connect to the phone. Usb storage works just fine, and the pc detects that it is Galaxy s6 connecting, but Smart Switch says "failed to connect to device". Now I do have the backup file in my pc, so could it be possible to move it to my phone and restore it from there? If so, how?
I have a problem with the WiFi in my mobile it is Android 4.0.4. When I try to connect to a WPA2 secured WiFi the mobile try to connect about 5 seconds. Then it disconnect and scan and it keeps trying to connect and disconnect and scan.
I downloaded smart switch on my new phone but it isnt compatible with the old one. what is the best way to transfer my files such as contact list and photos to the new phone.
I have smart switch installed on my pc with windows 10 and i try to backup data from my g920f running latest 6.0.1.
Smart Switch is stuck at "To complete the backup using Smart Switch you need to temporarily allow some permissions. Allow the permissions on the connected device"... There's no prompt on my phone.
I tried all kinds of reconnecting, restarting but still this dialogue.
I got a Samsung Galaxy S II last week for the first time, and I noticed something odd. I can connect to my home secured Wi-Fi network just fine using the network credentials, but I can't seem to use free Wi-Fi networks like McDonalds for example when I am out and about...
The phone says that I have connected, but complains that I have no network connection at those times.
I am on my second T-Mobile Galaxy S6. The first unit had a hardware camera defect as well as this wifi bug. I had them replace it and the new unit's camera is good but it has the same wifi issue. Here's what happens:
When I go to an area with an "open" wifi network, a notification pops up on my screen that says "Click here to connect to null." What's strange is I have almost all wifi features off, particularly "Network notification." It should not tell me when any network is available. I also have "Allow Always Scanning" off as well as Wifi Calling disabled (not that relevant). Anyway, once this happens, I have about 2 seconds to turn off wifi or else the phone will reboot. It's a "soft" restart though, meaning it shows the Samsung and T-Mobile logo then is back on again within 5-10 seconds and fully "booted" within 30 seconds. This will keep happening until I turn off wifi.
It's not just any wifi connection that will cause the issue. I think it has to be an "open" connection that uses a portal for authentication (think universities, hotels, airports, etc). Recently, I clicked on one of the notifications (connect ot null) and saw a Cisco portal. I am not sure if it's isolated to Cisco AP's...
If Wifi drops or I turn it off, the remaining icons go white, and then if you go to settings, about phone, status, the phone states UMTS and then switches to HSPA, and it states on network "Connecting, or Disconnected" A power Cycle will sometimes help. If I turn wifi back on, I have a Blue wifi, white H+, and a Blue Network Signal strength.
Today I received a second-hand iphone 3GS to replace a 4s which I lost.
Upon receipt, the phone displayed an image of a usb connector and an itunes logo suggesting that I need to connect to itunes before use.Â
When I attach the phone to a toshiba satellite C50 laptop it connects and immediately disconnects with an audible tone. This connect/disconnect cycle repeats every second or so and never ends.Â
If I connect the phone whilst powered down, hold the power button and home button together for 10 secs and then hold the home button only to enter restore mode, the phone connects to itunes and I get the option to restore. However, the restore always fails.Â
I have tried connecting using two seperate USB cables - I am not sure if either is genuine. There is no effect.Â
I have tried disabling USB controllers individually within device manager. There is no effect.Â
I have tried different USB ports/ There is no effect.Â
While connected, the phone appears in the device manager intermittently, appearing and disappearing as the phone connects/disconnects.Â
Okay so there's this WiFi network at school. It is unsecured, and my teacher always connects to it. On my iPhone 3G it never shows up, though after I scan for networks using Stumbler (Stumbler says it's not hidden btw) it appears in the settings. So I click on it and it says "Cannot connect" (or something along those lines) and after the third try it disappears again. I tried using SpoofMAC to spoof my mac address to 11:11:11:11:11 and that didn't work.
Tried to connect to wifi through my router at home. While the phone listed my home network as a saved network QWD-59989 WPA2 Personal, it fails to connect. I get a message to verify saved network's security settings, but I do not know where to find the settings. Also, what is the passphrase - is it the router key?
I had my phone linked to my home WiFi network, then I switched internet providers and temporarily had different WiFi credentials so I clicked "forget this network." Now I have set up my WiFi with the same SSID and Password as before but my phone won't auto connect.
I cannot connect to my wi-fi network. The phone finds it but when I choose it, it simply tells me that it is unable to join the network. I am thinking it is a password issue but the phone never asks me for my password. The wi-fi is locked so it needs a password. I do not have this problem with my laptop or my Ipad so I know the wi-fi network is working correctly. I just can't figure out how to get the phone to ask me for my password. It should do it without any prompting, but for whatever reason it does not.
IPhone won't connect to a wifi network, just get a message saying it won't connect to the network (it doesn't give me a message that I've got the password wrong). Other devices do join the network, What should I do to try to resolve it?
I have set up my new iphone but it won't connect with any wifi network. I have reset the phone and tried typing the password more slowley but nothing is working.
I have a Nokia N97, which having a mobile Internet connection, which I only want to use when I'm not near my different wifi network. But it does not connect automatically, and it always selects my mobile connection, why?
I've had a Curve since March and loved it. However this past month I've been having difficulty accessing wifi with it, something that was not an issue for me before. I'm with a data plan that isn't full data. I can only use Twitter/Facebook/IM Services. No email or browsing. When I want to use these things I connect to my home wifi and use that. Worked perfectly for the first few months. However now when I click email or browser on my phone with wifi turned on and it says it's connect to the network I get the following message:You are currently on a service plan that requires a Wi-Fi connection to this this application. If you want to use this application outside WiFi provider please contact your service provider.
