I have my S6 Edge connected via Bluetooth and each time there is a new chapter in Audible or a pause in Pandora audio, I noticed that audio fades in after a few seconds. This makes me lose a little bit of the audio each time. Is there some sort off Bluetooth optimization going on here or a tweak I can perform so that this doesn't happen anymore?
I am already extremely hard of hearing and need every bit of extra volume. I can reset media volume as long as the bluetooth earpiece is not turned on, but as soon as I turn it on, it resets to a little more than half way up. how to change this?
We are facing the problem from the Audio speaker and earpiece not working while calling. I need to removed the battery and put it again so i can used it again for calling. And after few hours aim facing again that problem( audio). My phone 9900 running with the version.
I want to like this phone so much but it keeps giving me problems. First, I am having the random reboot problem that is well documented on this and many other forums, so I won't go into that. One other thing that has been happening more frequently however is a problem with call volume. The phone will spontaneously stop using the earpiece for call audio and send the audio to the speakerphone on the back with the lowest volume setting. Adjusting the volume while in the call does not change anything, nor does turning on/off the speakerphone.This occurs during both in-coming and out-going calls. All other phone audio plays at normal volume levels, its just the audio during calls. It is extremely frustrating as the only way to fix it is to reboot the phone, so I have to hang up with whoever I am talking to and call back. Does anyone know any way to solve this problem? I'm hoping the pending Gingerbread update fixes these issues, but I am ready to return the phone and get something else if these aren't fixed.
I can not get music to play via bluetooth in my cars. When I go to the bluetooth setting there is no option for media audio. I have a gs5 with lollipop. The cars I am trying are 2010 Chevy Traverse and a 2012 Chevy Cruze. Is it the car bluetooth? I found on my search where it looked like others have been able to do it on these vehicles.
I just bought my first smartphone , a Galaxy S5. While I new to smartphones, I am not new to tech. In my car ( a 2015 Subaru Forester) I was powering my S5 with the USB cable plugged into the car's USB port. I had the phone playing Pandora. I sort of assumed that I would get the music signal on the USB line but found that the enabled BT was overriding the USB so I was getting the music with my radio set to BT-A. The problem was that the every few seconds the volume would drop and the phone would make two beeps. If I disconnected the USB cable and ran off battery, this issue went away.
On further inspection, I noticed that on every volume drop with beeps, a USB connection notification was appearing in the notification lists. I just wanted the USB for power but it seemed to be trying to connect over and over and each time, the notification was interfering with the audio. I could not find a setting to stop the S5 from trying to connect to USB data.
A few days ago my pebble arrived. After pairing my pebble to my phone I noticed a noticeable drop in Bluetooth audio quality.
This has to be a problem that's addressed. I don't know if it's a android problem or just the device specific but what I found out is that this occurs on the LG G4 as well. Seems happen when your phone is paired with a Bluetooth LE device while also paired to a Bluetooth Audio device.
I switched from my s4 to the s6 and I am having bluetooth complications with my pioneer avh p4400 headunit. I did some google-ing around and found that a a few others are having the same problem but seeing as the phone came out a few days ago not everyone is inquiring about it. Bluetooth audio does not auto connect/play like it did on the s4 and there is no song info/description displayed which then renders the track skipping buttons useless on the headunit. I found an app to fix the auto connect issue at least.
I am using Google play music so this is kind of unusual. I am not sure if it is an s6 only issue having something to do with the new touchwiz or if android 5.0 is using different bluetooth protocols than prior. Everything is updated to the latest firmware. I was debating on upgrading to the 4100nex but if this issue is going to be present there also I would rather not have an extra expensive paperweight.
I was pulling my hair out trying to get media audio to stay connected on my S6 and Ford Sync audio system. I tried everything until I realized I had overlooked the obvious. Media audio would not stay connected, but call audio would. You have to select Bluetooth as the input on the Sync system. Only then will it say media audio connected on the phone and music will start playing assuming you have songs on the phone. So for those having trouble with media audio, make certain Bluetooth is selected on your car audio.
I've had my ATT S6 64GB since the release day, and my biggest peeve is that the bluetooth audio seems to incessantly stutter. I've narrowed the issue down: - Happened independently of proximity between phone and speaker - Not a streaming bandwidth issue, as it happened regardless of streaming a song or playing a song that was stored locally on the phone. Using (wired) headphones, this is never an issue. - An issue on several speaker models (Bluetooth speaker names are: Bose Mini SoundLink, DNX6190HD, SC-HTB580, Fugoo Speaker), and other phones had no issues streaming to these devices.
I've been using my Spotify app. I'm not sure if this is part of the issue. It may be some sort of lag in the app processing the sound in conjunction with the bluetooth module? Not sure...
I have a relatively severe issue with the Bluetooth audio quality on my phone. It sounds pretty much exactly like 64kbits MP3, you can especially hear it in the high frequencies. It's somehow distorted and unclear and extremely annoying as it ruins the experience totally.
Everyone who heard sound over my Bluetooth devices has heard this.The weird thing: I experienced this with both my Galaxy S5 (G900F) and my Galaxy S6 (G920F) and every single Bluetooth device that is connected to them. I tried it with my Logitech Bluetooth Audio Adapter, Denon AVR X1100W, Logitech Boombox and my car stereo Kennwood KDC-BT35U. The audio quality is always the same.
However, with my Nexus 5, my Galaxy Tab S8.4 and my Laptop, the audio quality over Bluetooth is great! Also, if I use the headphone jack on my Galaxys, it sounds just fine. I mostly use Spotify and Google Play Music, but the problem is not there since it sounds great when using a cord.
When I connect audio via my Bluetooth headset the volume, even on max, is low. Why? If I'm outside I can barely hear anything. It's pathetic. My old M7 was much louder. I rely on my headset whilst driving - it's an LG ToneHow can I fix this without rooting?
I have successfully 'paired' my new S2 to my Ford Focus audio system, and it makes and receives phone calls fine - hands free. However - the current settings do not transfer my 'contacts' list to the car system. Every time I turn on the car ignition I get a little 'tune' from the phone, and a notification that says (something like) 'Ford audio would like to share your address book' and an option to 'OK' or cancel. If I click 'OK' my contacts are listed on the car system. There is also another window which says 'Do not ask again'Has anyone else had this issue - because I am getting fed up with having to allow the phone and car to share my contacts list every time I turn on the ignition.
My Bluetooth earpiece died and I need to get a new one for my iPhone 4s. I don't have bluetooth in my car. I read in these support communities that many Bluetooth accessories don't work with the iPhone 4s so tell me the brands or models of bluetooth earpieces that DO work or direct me to a site that might list those?
Previously I was using a Bold 9700 handheld and was able to pair it with my Platronics 975 Discovery Bluetooth earpiece.Recently I changed to the Bold 9900 and was unable to pair the handheld with the same earpiece. I activated my Bluetooth in the 9900 in attempt to pair up the devices. But the 9900 was not able to detect the earpiece despite numerous attempts. I have checked and double checked to ensure both devices are switched on and the bluetooth is activated.Is the bluetooth in my 9900 malfunctioning?
the bluetooth problem with 4g i have used the earpiece many times and has worked now all of the sudden it wont connect to my phone ive tried restarting the phone, forgot the device and now the phone wont find it. PLEASE HELP!
New Razr Maxx and Plantronics Explorer 240 Bluetooth earpiece will not pair. The phone sees the device, asks for the 0000 but gives a pairing error as the wrong code.Plantronics tells me they only hardcode 0000 (zeros) into the headset and the phone says it is the wrong code.
I have a Droid 3 and the bluetooth headset I have does not autoconnect (paired but not connected). I have to do it manually. My Droid 1 would autoconnect just fine. I don't see any option to auto connect. I saw some mention somewhere that there might be a code issue and someone sent something to google. I did not know if there was a fix for this. This was going on before and after the update.
Bluetooth Earpiece (Jawbone ICON with A2DP) does not give me an audible alert when I receive Texts or Calendar reminders. My phone vibrates, but I what I want is my chosen alert tone in my ear. When I get a phone call, I get the phone number read to me and the alert tone. I have tried turning the A2DP off and about a hundred other things.
I just upgraded from an S3 to an S5 a few days ago and I'm loving it so far. One thing that's bugging me though is that whenever I'm using my phone as an actual phone (Who actually makes phone calls anymore, right?!) there is an annoying buzzing/rattling/almost kind of like distortion) when the person is talking to me. It usually goes away if I turn the volume almost all the way down, but this is obviously not a practical option since I'm not always making phone calls in a dead silent room.
The speaker phone works fine. This only happens when I'm using the earpiece. Is this normal? Is it related to the camera autofocus sensor rattle? Are the sound vibrations from a person's voice enough to set off the rattle? It's really annoying as I tend to make phone calls a lot and I don't like using speaker phone or a headset. This was never an issue on my S3.
So ever since I updated to Lollipop in March (I'm with MTS) my Bluetooth audio with my pioneer double din stereo in my truck only works for about it a minute and a half then the signal seems to go weak and it gets really choppy and skips really bad. If I pause the song and wait 30 seconds itll sound fine again but only for about another minute and a half. Bluetooth audio works fine with my little Bluetooth speaker.
I have paired my HTC One "AT&T" with my 2012 Toyota Highlander. During the process I setup it up as a phone plus audio device. I can receive and make calls just fine without issue.
The problem is when I try to play pandora. No audio at all. Whats strange is thats its actually paired, i see the music symbol plus the connection strength bars on my console. It does not display any artist info or songs. When I play a song in pandora no audio on either my car or phone. Whats even stranger is I can use my car to skip songs in pandora but still no sound.
I have checked everything. Made sure bluetooth audio is setup in pandora. I have deleted my phone from toyota and the connection from my phone and repaired back up. Rebooted my phone.
I've seen hundreds of topics about this, but they're all very old and possibly irrelevent given the state of the android platform. My G1 is running Cyanogenmod 5.0.8 with firerat's AnySPL patch. I bought a bluetooth headset(Wireless Blue) hoping to listen to music and play videogames with it, but then I tried it and it wouldn't give the desired results. After a little research, I found out about A2DP. I'm aware that this mono bluetooth headset does not support A2DP. Is there any way to get audio output to my bluetooth headset without A2DP?
i bought my nokia c3-00 two weeks before, i have connected my phone via bluetooth to my car audio (ford figo), there is no problem in connecting the phone, i can make calls and receive and use all the features of the phone, but i coudnt play my music /mp3 files via blue tooth to the car audio. earlier i was using samsung star 3g, and there was no problem in it.
As we all know, the iPhone can TRANSMIT audio via bluetooth, but is it possible for the iPhone to also RECEIVE audio? Particularly from a TV or computer (assuming they also have BT)? Any know if this is possible, and if so, how to do that?
I have 9 9550 and it will not Send audio over my Bluetooth connections. I have deleted and added Several times but No luck. It does Work when I Connect those devices to Other receivers. Must be a Settings in the Phone or something is Broken.