So ever since I updated to Lollipop in March (I'm with MTS) my Bluetooth audio with my pioneer double din stereo in my truck only works for about it a minute and a half then the signal seems to go weak and it gets really choppy and skips really bad. If I pause the song and wait 30 seconds itll sound fine again but only for about another minute and a half. Bluetooth audio works fine with my little Bluetooth speaker.
Since i updated my Iphone 4S to 5.1.1 my bluetooth audio does not work with my pioneer avic930bt head unit. Phone calls work fine over the bluetooth, but i cannot stream the audio to the pioneer. Yet if i take my iphone to my wifes Acura, it streams fine.
I just updated my new replacement phone to Lollipop on my Samsung Galaxy s5... now i am not able to connect to my JVC car radio via Bluetooth. When I try my phone doesn't even see my radio. My old Galaxy S5 used to play just fine on the radio with the Lollipop update... It does see and pair to other devices,like my Tone Pro headset.
I have my phone set to respond to "OK Google Now". When I am not connected to Bluetooth, this works great. When connected to BT, the Moto Voice Blue "Listening" window pops up, then minimizes/closes after 1 second. This did not happen with KitKat.
I can not get music to play via bluetooth in my cars. When I go to the bluetooth setting there is no option for media audio. I have a gs5 with lollipop. The cars I am trying are 2010 Chevy Traverse and a 2012 Chevy Cruze. Is it the car bluetooth? I found on my search where it looked like others have been able to do it on these vehicles.
I just bought my first smartphone , a Galaxy S5. While I new to smartphones, I am not new to tech. In my car ( a 2015 Subaru Forester) I was powering my S5 with the USB cable plugged into the car's USB port. I had the phone playing Pandora. I sort of assumed that I would get the music signal on the USB line but found that the enabled BT was overriding the USB so I was getting the music with my radio set to BT-A. The problem was that the every few seconds the volume would drop and the phone would make two beeps. If I disconnected the USB cable and ran off battery, this issue went away.
On further inspection, I noticed that on every volume drop with beeps, a USB connection notification was appearing in the notification lists. I just wanted the USB for power but it seemed to be trying to connect over and over and each time, the notification was interfering with the audio. I could not find a setting to stop the S5 from trying to connect to USB data.
Dell BH-200 Bluetooth Stereo headset with mic doesn't work with new ICS (Android 4.0.4) in my Xperia Neo V after ICS upgrade, I am able to pair it and Phone Media works with it but not Audio, I mean to Say, Unable to answer calls using the headset. In Bluetooth Menu it is connected for both Phone Audio & Media Audio also.
Phone Model: SONY ERICSSON XPERIA NEO V Model No: MT11i Build No: 4.1.B.0.587 Bluetooth Headset with Mic: DELL BH200
It is working fine in my Pre Installed Android Gingerbird edition
A few days ago my pebble arrived. After pairing my pebble to my phone I noticed a noticeable drop in Bluetooth audio quality.
This has to be a problem that's addressed. I don't know if it's a android problem or just the device specific but what I found out is that this occurs on the LG G4 as well. Seems happen when your phone is paired with a Bluetooth LE device while also paired to a Bluetooth Audio device.
I switched from my s4 to the s6 and I am having bluetooth complications with my pioneer avh p4400 headunit. I did some google-ing around and found that a a few others are having the same problem but seeing as the phone came out a few days ago not everyone is inquiring about it. Bluetooth audio does not auto connect/play like it did on the s4 and there is no song info/description displayed which then renders the track skipping buttons useless on the headunit. I found an app to fix the auto connect issue at least.
I am using Google play music so this is kind of unusual. I am not sure if it is an s6 only issue having something to do with the new touchwiz or if android 5.0 is using different bluetooth protocols than prior. Everything is updated to the latest firmware. I was debating on upgrading to the 4100nex but if this issue is going to be present there also I would rather not have an extra expensive paperweight.
I was pulling my hair out trying to get media audio to stay connected on my S6 and Ford Sync audio system. I tried everything until I realized I had overlooked the obvious. Media audio would not stay connected, but call audio would. You have to select Bluetooth as the input on the Sync system. Only then will it say media audio connected on the phone and music will start playing assuming you have songs on the phone. So for those having trouble with media audio, make certain Bluetooth is selected on your car audio.
I've had my ATT S6 64GB since the release day, and my biggest peeve is that the bluetooth audio seems to incessantly stutter. I've narrowed the issue down: - Happened independently of proximity between phone and speaker - Not a streaming bandwidth issue, as it happened regardless of streaming a song or playing a song that was stored locally on the phone. Using (wired) headphones, this is never an issue. - An issue on several speaker models (Bluetooth speaker names are: Bose Mini SoundLink, DNX6190HD, SC-HTB580, Fugoo Speaker), and other phones had no issues streaming to these devices.
I've been using my Spotify app. I'm not sure if this is part of the issue. It may be some sort of lag in the app processing the sound in conjunction with the bluetooth module? Not sure...
I have a relatively severe issue with the Bluetooth audio quality on my phone. It sounds pretty much exactly like 64kbits MP3, you can especially hear it in the high frequencies. It's somehow distorted and unclear and extremely annoying as it ruins the experience totally.
Everyone who heard sound over my Bluetooth devices has heard this.The weird thing: I experienced this with both my Galaxy S5 (G900F) and my Galaxy S6 (G920F) and every single Bluetooth device that is connected to them. I tried it with my Logitech Bluetooth Audio Adapter, Denon AVR X1100W, Logitech Boombox and my car stereo Kennwood KDC-BT35U. The audio quality is always the same.
However, with my Nexus 5, my Galaxy Tab S8.4 and my Laptop, the audio quality over Bluetooth is great! Also, if I use the headphone jack on my Galaxys, it sounds just fine. I mostly use Spotify and Google Play Music, but the problem is not there since it sounds great when using a cord.
When I connect audio via my Bluetooth headset the volume, even on max, is low. Why? If I'm outside I can barely hear anything. It's pathetic. My old M7 was much louder. I rely on my headset whilst driving - it's an LG ToneHow can I fix this without rooting?
I have successfully 'paired' my new S2 to my Ford Focus audio system, and it makes and receives phone calls fine - hands free. However - the current settings do not transfer my 'contacts' list to the car system. Every time I turn on the car ignition I get a little 'tune' from the phone, and a notification that says (something like) 'Ford audio would like to share your address book' and an option to 'OK' or cancel. If I click 'OK' my contacts are listed on the car system. There is also another window which says 'Do not ask again'Has anyone else had this issue - because I am getting fed up with having to allow the phone and car to share my contacts list every time I turn on the ignition.
I have my S6 Edge connected via Bluetooth and each time there is a new chapter in Audible or a pause in Pandora audio, I noticed that audio fades in after a few seconds. This makes me lose a little bit of the audio each time. Is there some sort off Bluetooth optimization going on here or a tweak I can perform so that this doesn't happen anymore?
Updated to Lollipop last night Verizon OTA, "ok Google" not working further investigating the mic will not pick up at all in any application. I did a factory reset did not work, rebooted in recovery mode and cleared the cache, did not work.
I'm using a Samsung S6 and the device is upgraded to lollipop 5.1.1 now..
The parallax effect on the desktop isn't working anymore; normally the icons on the desktop are moving in 3D effect but since the upgrade this is turned off. You can try to turn it on but even that doesn't make sense.
I did contact samsung about it and they said that this must be a lollipop issue. Update the lollipop 5.1.1 to solve this problem. Even after a factory reset the problem will not be gone but show up again after a while.
So I updated to android Lollipop this week and things have been going well. Normally when I go to sleep I put my phone in silent mode from the quick toggles in the notification panel. I like silent mode so I don't get vibrate notifications during the night and sounds that would wake me up.
Before the update my alarm which I use in the AM to wake up for work used to work in silent mode and I would hear the alarm. The last 2 nights the alarm goes off but only on the screen and does not make a sound like it used to.
Call recipients can't hear me when I make calls. I first thought it may be connection issues or something, but literally every call the person on the other end can't hear me. I can hear them fine however. So I tried recording me talking with the voice recorder and can't hear anything either. Not sure if it uses the same microphone, but when I shoot video it does pick up the audio. I just got this phone and was really happy with it until now.
The a2dp stopped working on my S6. (G920F 5.1.1 unrooted) I can pair with devices (Speakers, etc) but if I go to their individual settings, the "Media Audio" is disabled. I can still connect to my car stereo and use the phone (the car stereo doesn't support a2dp).
I have done a factory reset 3 times, and the a2dp starts working again every time but after a while it stops. I have been careful in trying to identify what app triggers the a2dp to stop working but it doesn't seem to be related to installed apps.
Today, I made a call in my truck (2013 F-150) using bluetooth and the Sync system and it was super quiet. I had the volume on the phone all the way up, and the radio in the truck was turned up where it normally is. I later tried another call, to another person, and it was the same issue. I deleted the connection, both on the phone and in the truck and set it up again like it was new. It seems like it may have worked, but hard to tell, since I am just sitting in my driveway and it's to late to really call people to test it.
Since "upgrading" to lollipop on my Verizon G3, using Google Play Music, I'm getting a really annoying stutter when Bluetooth streaming. Random stutters, freezes, drops. VERY intermittent. Didn't do this prior to lollipop. Strangely though, metadata is showing all the time now, which is an improvement.
I used to have the S5 and was playing Spotify via Bluetooth onto my car stereo system which is a Dodge Journey with the UConnect system. All worked fine. Recently got the S6 Edge and now can't get it to remain connected for more than 30 seconds. Phone says Bluetooth has unexpectedly stopped working.
I have paired my HTC One "AT&T" with my 2012 Toyota Highlander. During the process I setup it up as a phone plus audio device. I can receive and make calls just fine without issue.
The problem is when I try to play pandora. No audio at all. Whats strange is thats its actually paired, i see the music symbol plus the connection strength bars on my console. It does not display any artist info or songs. When I play a song in pandora no audio on either my car or phone. Whats even stranger is I can use my car to skip songs in pandora but still no sound.
I have checked everything. Made sure bluetooth audio is setup in pandora. I have deleted my phone from toyota and the connection from my phone and repaired back up. Rebooted my phone.
I've seen hundreds of topics about this, but they're all very old and possibly irrelevent given the state of the android platform. My G1 is running Cyanogenmod 5.0.8 with firerat's AnySPL patch. I bought a bluetooth headset(Wireless Blue) hoping to listen to music and play videogames with it, but then I tried it and it wouldn't give the desired results. After a little research, I found out about A2DP. I'm aware that this mono bluetooth headset does not support A2DP. Is there any way to get audio output to my bluetooth headset without A2DP?
i bought my nokia c3-00 two weeks before, i have connected my phone via bluetooth to my car audio (ford figo), there is no problem in connecting the phone, i can make calls and receive and use all the features of the phone, but i coudnt play my music /mp3 files via blue tooth to the car audio. earlier i was using samsung star 3g, and there was no problem in it.