When I'm at home I also use my wifi on the torch to connect to my home wifi, A few days a go my battery ran dry and was turn off, When I came home I turned everything on again but I can't connect to my wifi no more, I see it on my torch and use the right password but then I read somebody 'unable to obtain the IP address"
I bought my blackberry torch on thursday got home and set it all up and i was able to connect to the internet, but when i just looked at it today, the wifi connection has completely gone but when i search for it it is still there, but says 'failed to associate with the network' any ideas of how i can connect it again?
Got a problem here and i am looking for someone who can help me..i can't connect to my wi-fi here at home or even outside..i had it reformatted for it was bought in Saudi Arabia.
i used to be able to connect to my home wifi and download apps from bb appworld. then i travelled from the philippines to my work base in the bahamas. then i couldn't go to appworld but still able to open my facdebook and Internet. just today i couldn't connect to my wifi (it's working fine), even if i enter the password. i wonder what happened?!!!
why I cannot connect to internet using wifi connection? Before this, I can use my internet via wifi without any problems. Do i need to re-format my device?
Tried to connect to wifi through my router at home. While the phone listed my home network as a saved network QWD-59989 WPA2 Personal, it fails to connect. I get a message to verify saved network's security settings, but I do not know where to find the settings. Also, what is the passphrase - is it the router key?
I just got a Torch 9810. Been trying for the past day and a half to connect to my wireless at home. In the Networks and Connections menu the Wifi networks is not there . . .only have Mobile Networks and Bluetooth . . .does this mean that my BB is not Wifi enabled? or do I have to go elsewhere in order for it to search and find my home wireless?
I have problem with my BB Torch 9860 smartphone.I used to connect my WiFi when i am in my home.In connection management it shows that WiFi connected but when I started to browse, the browsing is happening through my Wireless connection that is my mobile provider.So loosing my money due to this.I did so many checkups still facing same problem.Please assist me on this.Also I have one more problem with G-Talk, I installed it successfully and when tried to login showing that this handheld is not support gtalk application.Suggest me on this also.
My Torch sees the available connection, but will not connect. I followed the instructions on the device a dozen times. Neither the Verizon Wireless people or the FIOS people have a single clue.
Since lately my BB Torch is failing to detect or connect to my home wifi system, I even notice that it can't connet to external open networks. I use to connect so seamlessly before but now my Torch don't want to do wifi no more. I get a message saying "fail to obtain IP address" or cannot connect for some other reason I have never had before. This is very distressing to my wife and I who can't connect our individual Torch to our home wifi anymore.<br><br>
When I set up my Torch 9800 to connect to Wi-Fi, the home screen reports the SSID of the access point, but when I attempt to use the browser, it reports "Unable to connect to the internet, please try again later." The "Device and Status Info" screen reports the WLAN IP Address as 0.0.0.0. My wireless access point reports that the BB device is "on", and is assigned an IP address (192.168.2.17).
At one point my initial screen reported that three updates were available. However, each time that I clicked on a line offering an update, an error message reported that "The data service is not operational", and the message about the update went away.
Snooping with Wireshark show that, when the BB is turned on, an ISAKMP tunnel is established between the BB device (at address 192.168.2.17) and segw.uma.rogers.com (at 74.198.30.49), so there is absolutely nothing wrong with the physical wireless connection. (My cellular supplier is Rogers.)
My BB was received (brand new) in early April 2012, and I updated the device from 6.0 bundle 695 to 6.0 bundle 2921 on 2012-04-12, after installing the Desktop Software on my PC. (The Desktop Software offered the update, so I just did it; I was not even aware of this community until later.)
I have a BB Torch 9860 which connects to my home Wifi fine but does not connect to the internet for some reason. I cannot access the net and get my emails or use a 3rd party browser like opera nor can i do anything. This is a major concern for me as it doesn't matter when i am home but it's amjor concern when i travel abroad.
I recently changed my bb 9670 style cdma for a torch 9860 gsm and now with this new bb the bis service over the wifi is not working and is the same carrier just changed the device, also i have a unlimited data plan, but in some areas where im used to stay there is bad reception so i used to be connected by wifi for my bis services, is this a problem of the gsm or RIM, i called several times to costumer assistance but they said that new os7 dont support bis over wifi, and thats not true so what u recomend to me
Did the update and now my iphone 4s wifi does not connect to my home wifi. It just sits there with the little circle going round and round. My ipad3 updated and works fine...
All devices surfing wirelessly on Airport Express.Replaced Airport Express with Time Capsule.Problem: Wife's iPhone4 (5.1.1) can not surf on wifi provided by my time capsule. All my other devices (iMac, Mac Air, iPad and my iPhone) can. Wife's iPhone can surf on an unsecure network somewhere nearby in my apartment complex. (Which to me, rules out a hardware problem).
Steps taken: Tapped iPhone wifi On/Off multiple times with no change. "Forget this network" multiple times with no change. Reset iPhone Network Settings multiple times with no change. Restored iPhone using iTunes as New iPhone once with no change. (Since doing that, I have restored with back up of iPhone settings and data.) Powered Time Capsule on/off several times with no change. Turned wireless security off with no change. Security is back on. It is WPA 2 Personal with a lengthy password. I'm not getting the "incorrect password" msg. Renewed lease multiple times with no change.
Other indications: 3G is in upper left. Status wheel is spinning next to my network's name. On the initial "Settings" window, my network name is shown (as if it were connected. But tapping it and going to the "wifi networks" window shows the list of available networks with the status wheel spinning next to mine.) Tapping the blue arrow on my network name leads to the window that has "forget this network" at the top, and a list of blank fields: IP address, subnet mask, router and so on. DHCP is chosen, HTTP proxy is OFF. Sometimes, the top two fields (ip address and subnet mask) have values filled in, but the rest of the fields don't.
On my Time Capsule, as seen via Airport Utility (V5.5.3), 3 devices are shown as connected. Clicking this provides a listing. My wife's iPhone wi-fi address is listed. It's "rate" however is 1. My imac is 216 and my iphone is 65. BTW, iOS devices drop off the list when they go to sleep. No big deal there.
Back to Airport Utility, in the summary tab... status is normal, version is 7.6.1, wireless mode is "create a wireless network", security is "wpa/wpa2 personal", channel is 149 auto and 1 auto (I tried changing 1 to 11 with no change), connect using "ethernet" and finally my IP address begings with 76. 76.xxx.xxx.xxx
Moving to the "Wireless" tab of Airport utility... wireless mode is "create a wireless network", radio mode is auto, radio ch. selection is auto, wireless security is wpa/wpa2 personal, "remember password in keychain" is checked. Now Clicking on the "wireless network options" button..... 5ghz is not checked, country is USA, multicast rate is "low", t-mit power is "100%", WPA group key timeout is 1 day (it used to be 1 hour but this has made no change in the problem), "use wide channels" is not checked, "create a closed network" is not checked.
MAC access control is not enabled. But it was enabled previously and I added my devices by their Wi-Fi addresses one at a time until i decided to turn it off due to this problem. this resulted in no change with the problem.
Personally, I feel the prob lies with the DHCP and ip address and related fields, but I don't know enough about what their values should be in relation to my other devices to alter them on my own.
I got an iphone 4 yesterday and i am having trouble finding wifi spots.i went to a shopping center today and it had around 10 different wifi spots and i could only see one.
my 3 other friends has iphones (two have 3gs on has 4) and they could see and connect to them all fine. this is happening everywherealso i cant even see my home network unless i am standing right next to the router where as the other iphones can pick it up from upstairs or in the garden.is there anything i can do to change this like restoring or anything else? or is it faulty?
ive went to the wifi setting properties. then, the problem comes after i selected "scan for network" and selected my wifi network name. then, it requested me to insert a PIN into my router. how do i do that?
My BB is not connecting to WiFi Following directions, I ran the loader.exe file. Once the reinstallation of the OS, I was able to access WiFi. However, as I turned off the battery to insert the SIM and connected agian I no more accessed WiFi. If I run the loader.exe again comes the error message: BB Desktop SW does not have BB Desktop SW for the device. Contact your provider, etc
So my phone got wiped, lost everything. When i started to set everything up again (wifi etc) i noticed BIS does not connect through wifi anymore. It did before my phone got wiped. Is this temporary or do I need to do some fiddling around?
i cannot connect to the net using my wi fi on my blackberry curve 8520. wen i go in to settings and click on to manage connections it as a tick at the side of wi fi and says TALKTALK- 3B0BD4 and a tick at the end. if i turn my mobile network of my signal goes, and when i try to connect to the net a message comes up saying unable to connect to the internet, please try again later. if the problem persists please contact your service provider.when i try to set up a new wi fi connection and scan for networks it comes up with TALKTALK-3B0BD4 and undernieth it says connected and the signal is full at the side of it?
my blackberry 8520 lets me connect to wifi and says am connected but when i click the browser it comes up with a message sayin cannot connect at this time if problem persists contact your service provider or try later and no matter what i do it will not connect to any network
My blackberry can connect to the net using data but I can't connect using wifi. This only happened recentley and before I was connecting using wifi and there was no problems. On the main screen it displays the name of the wifi that I use but when I try and load a page using the wifi it says it is unable to connect and if the problem persists to contact the service or network provider. I have hard reset it a few times by taking out the battery when its on and I have also reset the network but it still doesn't work.
I have a curve 8520 unlocked IM in the us for vacations but still need for work my bb one day for emergency I put a sim card from t mobil of other bb on my phone the phone worked to de the call but when I but my chip back the wifi that had been working all the time perfectly stop connecting now it wont connect to internet just to the router what can I do to fix my wifi connection again?