My torch 9860 doesn't boot completely anymore and for that reason, I haven't been able to use it for a long time now. The booting bar loads and gets to somewhere near the end and hooks there after which it never moves again! I've left it booting for over a day and it still didn't boot! I've reloaded the OS severally, even done a downgrade to 7.0 but still, no success.
View 7 RepliesMy device does not boot. 70% of the load I have a white screen with writing:Reload software Error 102With the only references that I can reset each time the same screen.I have already removed the battery, sim card and memory card even do nothing.
View 2 Replies View RelatedTorch 9860 one week old. Battery went dead so I hooked up charger. Now phone will not boot up. I get a red LED light on for 10 seconds and off for 8 seconds, repeats. Tried removing battery. Tried booting in safe mode (holding escape key), nothing works.
View 1 Replies View RelatedI bought a new Bb torch 9860 the day before. It was working perfectly fine until this evening. It has now stopped turning off completely which it was doing very well before. Now it goes into a standby - like mode and quickly turns on when the red button is pressed. Earlier it used to take time in loading (I know it's a time saver but what if I want to switch off my phone completely to give it some rest). I am unable to switch it off completely other than by the method of removing it's battery. Also, it had stopped showing recent updates in bbm and was suddenly not playing any media file before this thing happened. These two have now been resolved but the turn off thing still wont work.
View 8 Replies View RelatedI have a problem with my N95. During update with a usbcable nad nokia pc suite the cable is disconnected. Now my phone will not boot anymore. It does says "nokia"but the backlight is not on.
Is there a method that can hard reset or reformat the device?
I dropped my blackberry torch 9860 on the floor and it turned off. And when I turned it back on it said "Insert SIM"and now wont read any SIM card that i put into my phone?
View 1 Replies View RelatedI have a 9860 Torch and after two weeks, my hangup button stop working when I made calls.My ''back'' button too have the same problem when I'm in the menu.I reboot many time my device and the problem still.What I have to do? Return to my store. They told me: ''we have to send it back to Blackberry and wait many weeks to know if they will replace the device or charge you 60$ if they don't find the problem''.
View 4 Replies View RelatedI selected silent from Sound and Alerts when I was in cofernce, now when touch on Sound and Alerts, It doesn't open, i tried to get into setup and try to open it, it doesn't open, my fone in silent mode.
View 1 Replies View RelatedI bought an unlocked BB Torch 9860, for same reason I don't know why, it doesn't work in 1900 Mhz Band, that produce I can't link to the 3G network in my country. Is it possible to solve the problem?
View 7 Replies View RelatedMy Menu Key doesn't work anymore.
Does anybody know if it is possible to emulate the Menu key from the keyboard (some shortcut) ??
I have a 9800 black berry device that I bought from Saudi Arabia. This device doesn't work any more and without any previous problems with it. So, I want to know from where I can fix my phone and how much that will cost me? By the way, I am a student in Waterloo city, so I assume that it will be much easier to solve my problem soon.
View 1 Replies View Relatedmy 9810 doesnt boot up completely and doesnt connect to my desktopmanager either...it opens up a screen where i see 'blackberry Platform 5.0.0.469'.....and i am using a blackberry 9810 with an os7..
View 5 Replies View RelatedI am a blackberry developer working on a recording software. Just did an OS upgrade on my 9800 when I saw an upgrade alert on BlackBerry Desktop Software.The OS after upgrade is 6.0 bundle 2342 (v6.0.0.526 platform 6.6.0.195)Now when I run my application to do the voice record (WAV format, not AMR ), I keep getting an error "Requested bitrate is not supported", I tried different bitrate (8000,16000, 44100, 48000....), none of them supported.I used to use bitrate=8000 for recording and it worked, but now it throw above exception.I even change encoding bit from 16 to 8bit, channel from 1 to 2, didn't work.
View 1 Replies View RelatedMy Torch 9810 touch screen doesn't work properly anymore...it works each time the phone has just been freshly boot or when a battery pull has just been performed and stops afterwards until another battery pull or boot is done. is this some sort of software problem? Can it be fixed? If it can, how? I tried upgrading to OS 7.1 but the same problem persists.
View 1 Replies View RelatedSo, my phone has been dead for a few days now. I don't know exactly where to begin. I bought my phone online, but has a service warranty last September 10, 2011. It worked fine, just some few minor problems that didn't really bother me until some people noticed it, like the screen twitching as if the pictures are moving. Not as responsive when not in use, would take a couple of minutes before it would light up if I click the buttons. And phone call won't last more than 10 minutes.
Anyway, so two months ago, I had a problem, my phone just freezed and I kept doing a quick pull which everytime it loads and goes on but still keeps on freezing. Then, finally, an error appeared (JVM Error 102) when the BlackBerry Reboot won't completely load anymore (3/4) then if I click reset or do another quick pull, same thing happens. Got annoyed, so didn't really mind my phone for about three days, until finally I had it and just searched online and tried everything and finally got it to work using JL_Cmder! Which was a blessing then, because nothing got erased and was working fine, and the phone call would last more than 10 minutes, too.
But, now, sadly... I think my phone is now officially dead. After four months from having it, same thing happens, it would freeze and just turn off automatically and if I press the buttons it would not respond. The battery percentage was high, more than 50% and I am positive about that, so I was really weirded out when it would not respond when I click the buttons and it would stay black. So, I did a quick pull. It would work, but then same thing would happen, and I'll do another quick pull. Until, finally it went off...... then there another error occured (JVM Error 545), which by searching online, I thought I could fix it easily like JVM Error 102, but I couldn't or was lazy to do so because I had to wipe it off which I don't want to do, or I didn't research enough. So, again, I left it on for a day, to drain the battery I guess or whatever, because the white screen with the JVM Error 102 won't go anywhere and I don't want to remove my battery. So, after an overnight, the next day it just turned black. I could still turn it on, but it would have that sand timer thingy that inverts when it loads (no idea how to explain it), and then red light would turn on, and off then back again to the sand timer. It would restart itself like that even if I don't do anything. So, I removed the battery... then the next day.... it just died. I would charge it and if I hold the end button the red light would come on, and there it will be, even if I leave it for hours. Nothing will happen but that steady red LED light on
I'm having serious problems with my S6. The phone crashes, shuts down and reboots over and over again. Right now thee is no way I can boot the phone without freezing. Even in safe mode and recovery mode the phone freezes.
I had these problems before and returned the phone. They 'flashed' the firmware and checked all the harware (no problems). The phone worked properly for two weeks but then all of a sudden the problems were back.
I want to make backups before I return the phone again but that's simply not possible. If that's not possible I prefer erasing everything somehow, without making any backups. I still have my backups from a couple of weeks ago.
My iPhone will not boot up, and I don't know what did it. My friend said his iPod won't come on because he charged it on a friend's XBOX overnight, and so did I. I really don't know if the XBOX did it, but it's possible. The other day I turned it off to save power, and when I tried to turn it on, it wouldn't completely boot up. The Apple logo shows up for about a minute and then the loading symbol comes up and just keeps going and it won't ever get to the lock screen. I've tried to restore it. It won't show up in iTunes so I heard about putting the device in Recovery Mode to make it recognizable. It made it show up, but every time I tried to restore it gave me error codes like 21, 1600, 1601, 1602, 1603, and 1604. My iPhone was on 5.0.1 and at the Restore page in iTunes that only had options to Update and Restore. Update was grayed out, and there should be an update to 5.1. Then today when I tried restoring it the message at the top was stuck on "Verifying iPhone restore with Apple..." iTunes isn't frozen on "Verifying iPhone restore with Apple," it just won't say anything else. I've tried everything and nothing works. I've even tried holding the Power and Home buttons forever, and still, nothing works.
Info:
iPhone 4, iOS 5.0.1
i bought a new torch 9860 with OS7. when i try to open any flash video from facebook, it doesn;t open and says my phone doesnot support this. on adobe site, there is no flash player available for blackberry os7.
View 2 Replies View Relatedmy e71 doesn't have 3G anymore even when it's on dual mode, i nid a solution
View 1 Replies View RelatedI had tried all the possible ways to make Nimbuzz works on my asha 303 but nothing out..The app runs but can't connect .. Reinstall it don't help ! Reset or hard reset mobile don't help either .Is here any one had run it successfully before on asha 303?
View 3 Replies View RelatedWhen plugged in my charing icon doesn't show the lighting bolt to verify charging.The battery itself just stays at the very low red icon.
View 2 Replies View RelatedI have been using this for a couple of months and loved it. last night i was trying to pair it with my PC and finally got it working using BlueSoleil. However it spontaneously turned off and I could never turn it on again (I was not handling it in a harsh way at all, just turning it off and on and putting into discoverable mode several times).I thought maybe it's the battery so I chraged it and I had hope since the red LED came on indicating charge, and I waited til it went green. Alas, no difference. My headset is DEAD. Please help revive it, is there a way I can hard reset it or something?
View 4 Replies View RelatedMy password doesn't work anymore : How can I change it without cancell all my datas? Since my computer assistant helped me to synchronise my BB's datas with my computer (in which he did not succeed), my password is not anymore crypted on my telephone, and it doesn't work anymore !!! So I can not use anymore my contact list or my calendar. How can I change my password or make in sort that it works again like before, BUT NOT cancelling all my datas on it?(which are not on my computer, neither on the SIM card. As you can imagine, it is very important for me...
View 4 Replies View RelatedMy volume key down doesn't work anymore. In every occasion it doesn't work, while calling, listening music, or watching movies. If there is not, is there an alternative way to control the volume?
View 3 Replies View Relatedmy curve 8530 doesn´t go online anymore again. I just bought this one like 4 weeks ago.
View 1 Replies View RelatedI just recently updated my iphone 4 a couple weeks ago, and I don't recall, but I may have used Airprint as late as yesterday. Today, it cannot find my HP m1536dnf. I can print over wifi with my Macbook Air, and it works on my iPad, but I used to be able to print with my iphone 4 and now I cannot. I have done a reboot on my iphone, and that doesn't work.
View 2 Replies View RelatedWhen I connect my iPhone 4S (iOs 5.1) by USB to my iMac (Os X 10.6.8), it won't show up anymore in iTunes/iPhoto/Finder and the battery won't charge either. It used to work, but now it doesn't. I have the latest versions of all the relevant software and I tried every trick I could find on the fora. What can I do next?
Info:
iPhone 4S, iOS 5.1
The display of my 15-months old iPhone 4 doesn't react to touch anymore. Resetting and putting it back to factory setting didn't work. I always had it in a case and never dropped it. Any suggestions? Unfortunately the 1-year-warranty already expired. Did anyone else experience this problem?
Info:
iPhone 4, iOS 5.1
I restored iphone and cant use it again as it doesn't recognise sim anymore.
Info:
iPhone 3G, iOS 5.0.1
my iphone 4s doesent find my wlan anymore
i tried to restore the iphone but it still doesent find it the wlan works because i use it also on my laptop
Info:
iPhone 4S, iOS 5.1.1
Ok so when I plug my Droid 2 R2D2 edition into my laptop, nothing hppens. It used to work fine, but now when I try absolutely nothing happens. It doesn't make the noise indicating I've just plugged soemthing into the USB drive, I've tried both USB drives, it works with my PC so I know it's not the cord, plus I use the same cord connected to an outlet adapter to charge it and it works fine but all of the sudden when I plug it into my laptop I get nothing. It doesn't charge, I go to my computer it doesn't show up, I scan for devices I get nothing, I've tried updating motocast and motohelper, and it still doesn't work but like i said it used to work fine, plus this is a brand new phone i recently got a replacment and even after i got the replacment phone it worked fine the first like 20 times I connected it to my laptop, nothings changed. I've got a Dell Inspirion running Windows 7 if that makes a difference but as I've stated nothings changed since the last few times it worked successfully.
View 2 Replies View Related