BB Software :: Trying To Update 9650 To OS 6 - Stuck On Requesting?
Aug 25, 2011
I have a Bold 9650 that I am currently running 5.0.0.1006 on and I'm trying to get it to update to OS 6, I am currently away from my computer with the DM on it and my office computer won't let me download the DM. Last night I tried to pull it from the wireless update option and that sat for 6 hours still saying "Requesting available updates..." Am I doing something wrong or how can I update my phone to get up the current OS?
basically, i've got a blackberry curve 9300, been using my house's wifi for a while without trouble, occasionally have to disconnect and reconnect every now and then, but figured it's kind of standard. but yesterday, when i tried going on browser (think it was via the Internet app icon) it said "requesting..." and took ages to fill the requesting bar, and even when the bar was full, nothing seemed to be happening. i've turned off my phone and turned it back on, i've disconnected from the wifi and reconnected but nothing's worked. it seems to be a browser problem, because i can connect to the wordpress application and use that via wifi
Like others, I tried the software update, and then my phone constantly got stuck at the four little circles at start up. I followed some instructions I found on AndroidPit:
1. From a powered off state, press the Power button to start your Nexus 5. When you see the Google logo press and hold the Volume Down key and release when the device vibrates. 2. Use the volume keys to highlight Recovery Menu and press the Power button to select. This will bring you to a screen with an Android on its back. 3. Hold the Volume Up key for 5 secs then release and a new menu will appear. 4. First off, you can use the volume keys to select Wipe Cache Partition. This will cause your phone to restart. once this is done, re-do the previous steps to get back to the same screen (the one that Wipe Cache Partition was on). 5. Highlight Wipe Data/Factory Reset and select using the Power key. Scroll down to Yes, Delete All Data and press the Power button again to select. 6. Your Nexus 5 will now wipe your data and reformat. 7. On the next screen hit the Power button to select Reboot System Now.
It has been 40 minutes now and it's stuck on 'Formatting /data'. Is this normal?
I've only had this phone for a couple of months and it was functioning perfectly until now I haven't rooted it or anything.
I am using an ad-supported application called BatteryWatch (1.9.7) and everything used to be fine. Now, however, everytime I open it I get the request "BatteryWatch is requesting changes to its application control permissions." No matter how I change the permissions, this message ALWAYS appears.
The strange thing is that it didn't use to happen before. Since the time that it was working I have updated the application, updated Blackberry App World and I think the company might have moved onto BES/BIS(?).
Wondering if any of u have gotten ur verizon 9650? If so have u noticed ur trackpad left side being higher than right? I ask becuz as we all may know the sprint 9650 has that. Doesn't bother me...nor do I think its defect.
I admin a mail server for a couple of dozen people. One of them has a Blackberry. About every 80 minutes, goes it nuts and creams the server's I/O capacity. To give you an idea of the scale, I have a process that runs daily, scans all the files on the system, and transfers the differences to a backup server. This fellow's Blackberry is an order of magnitude higher IOPS than the backup process. I turned on some debugging on the server end, and it appears that the Blackberry is simply issuing an IMAP FETCH command for every message (and there are QUITE a lot of messages). It's only getting the flags, in other words, it's checking to see whether or not the messages have been read. Over and over and over again. Every 80 minutes. The entire mailbox. What setting do I need to tell him to change in order to turn this off?
I have a Blackberry Bold 9780. When I click on any of my bookmarks or type in any web address, the loading bar at the bottom of the page goes inch by inch and says "Requesting...." Then when it gets all the way to the end, it just stays there still reading "Requesting..." And the page is blank. I've tried restarting my phone, pulling out the battery and nothing works. The only web address that seems to work is my bookmark to Google Translate. IDK why that one, but it works... I miss my internet!
Storm 2 (9550) with Verizon, running v5.0.0.607 (Bundle 1020, Platform 4.2.0.275)When a new application requests application control permissions, I receive the "View" dialog box, which in turn delivers a screen that shows "RIM - Application Modules". I would then typically select the "Menu" button which allows me to "Save", "Set as Defaults", "Apply Defaults" or "Edit Defaults".The problem I am having is that "Save" does nothing. "Apply Defaults" does nothing. "Set as Defaults" is the only selection that works, my app then launches.Shouldn't "Save" and/or "Apply Defaults" do virtually the same thing considering I have all Permissions set to Allow.
no matter what settings I use on the 9650 "Memory" settings. I cann't get any computer (Windows 7 or XP Pro) to recognize the device as "mass storage device" so I can access the memory card. There is plenty of items on the card, and I can access them fro mthe decive, but the computer won't "find" it. This is with DM 5.0 and 4.7, on windows XP Pro and Windows 7.
I purchased the 9650 bold a few weeks ago. I do not do a lot of texting, but when I do, the texts are pretty long. On my old BB I hit the back arrow key and it saved to draft, (i would often have 4-5 texts in draft before I sent all out) If im not mistaken you cant do this on the new 9650?? Do I need to get an application to assist with this? ANy suggestions? Sorry if this is a rookie question but...Im a rookie when it comes to these phones.
When I upgraded my 9630 to my new bold 9650 I had a 16gb micro sd card in the 9630. I copied all of the files from my card to my computer, put the 16gb card in my 9650 and formatted the card. I then copied all of the files from my computer back to the sd card and put the card back in the 9650. All seems to be ok, I have my pictures etc. When I go to connect my BB 9650 to my computer I get a message on the BB that says: "Content rights do not match this device. Please insert the media card back to the right device." this only happens if I have the memory option set to "Auto enable mass storage mode storage set to NO" Any ideas? Thank You
Is anyone else having trouble using the "Vibrate in Holster" setting? My 8330 would automatically switch to vibrate when I put it in my holster that has the magnetic closure. My 9650 fits in the same holster but doesn't seem to switch to vibrate even though I have that setting chosen under my sounds profiles.
Just wondering if I get a Bold 9650 next week and I back it up with all my apps and settings from my backed up Storm2 9550 file will that happen successfully or should I just reload all apps from scratch?
BTW: I have SocialScope on my Storm2 will it be an easy transfer to my Bold 9650?
Anyone else have this problem? I usually sleep with my Bold in bed with me (who doesn't) lol, and have been waken up many times to a sizzling hot phone. like burning up hot. I put it on the nightstand and seems to cool down. but I always slept with my tour laying next to me in bed, and it never got that hot. Please let me know, or test this theory tonight Just want to make sure it is not a bad phone or battery. thanks for your time.
Not being weird its my alarm clock and i don't have a nightstand on my side of the bed and I sure as heck am not leaving it on the nightstand with my wife's bold. mine needs comfort lol. Also i realize this may have been posted before, but i am more looking for 9650 specific threads. and more charging specific threads as well.
Is the keyboard on the 9650 exactly the same as the 9630? Or is it the same as the keyboard on the 9700? The keyboard on the 9700 is much nicer in my opinion to that of the 9630 as its a little wider it seems and keys seem a touch bigger.
I started to download the 4.3 update (AT&T) and it still shows its downloading but it's been stuck on 4.0 mb for a long time now. Is something wrong? Should I try to restart the download somehow?
can anyone help me with my iphone 3 8gb it will not update and is stuck on 4.2.1, everytime i stick it on itunes it just moves the update to a later date everytime?
I've bought an new bb device now i am updating everything and it's getting stuck during update wat to do? Following is currently standing on screen for half an hour now
In the process of updating my blackberry bold 9930 and it is stuck on social feeds. Won't go beyond 16% progress. When I restart my phone it is automatically in this update.
I connected it to my computer and the desktop software came up and synced the phone and then said that there was a device software update. I clicked to let it update and everything seemed to be fine until it got to right near the end, where it's been stuck for over three hours. I don't want to disconnect my phone, but I also don't have any clue what to do. Can anyone give me some advice?
I was told i needed to update my phone (curve 9360) to the latest software. so i did all the necessary things needed, and then it got down to the actually installing, and the screen was said:
it was on this for 4 hours, so i took battery out to restart, when i did turn it back on, it got back to 7% and stopped, i need my phone urgently as i have NO way of contacting anyone - therefore wont be able to go to work, because i cant contact the person who gives me a lift. I cant contact anyone in an emergency. I was expecting an important call which obviously i have missed.
My motoactv will not update. I used it running for the first time yesterday and the gps was lousy. I kept losing the location lock. I know the last update was pulled. Is there a way to get it to update to at least the first maintenance release.
I have a problem with My Nokia E5.I tried to update it, All files downloaded successfully but when it reached "installing device software" (About 15 minutes total) it's stuck there for 2 hours!
My phone has been stuck on the update screen for 6 hours and its stayed at 11%. I need my phone and have tried turning it off and taking the battery out, even plugging it into my pc, but nothing is working.
I plugged my 9790 into my PC to sync with desktop manager and was offered a software upgrade first. Desktop Manager loaded new software ok. The Device Software update started and the back up went fine. Software seemed to download ok but is now stuck during the install at 'Reconnecting to JVM'. It has been like this for hours. The screen of the 9790 shows the clock although a reminder message came up which I cancelled - now back to the clock. The text in the update window says that the device must not be disconnected during the update process as it might render it unusable.
