I am with T-mobile with a Blackberry 9700 v5.0.0.330 (Platform 5.1.0.91)
I am having difficulty syncing my device to my computer.
I am running Vista 32 bit on a Dell Inspiron 1525.
I have downloaded Desktop Manager 5.0.1 B49 MultiLanguage - Without Media Manager successfully and downloaded the latest version (I have seen elsewhere that this version is suggested for the bold 9700).
My computer recognizes the device but from the Found New Hardware prompt as a RIM Composite Device but In the desktop manager it says that there is no device plugged in.
I have also turned on media card support and mass storeage mode.
I cannot find the appropriate driver through the device manager either.
I did a couple battery pulls and connection re-tries in different usb ports.
When i run the desktop manager setup file, the installation process begins, and shows me a dialogue box that says 'pending .net framework' and i hit install to let it start. It goes through a couple of dialogue boxes and after like 5 mins, an error appears saying 'this requires that .net 3.5 sp1 shouild be installed' and i hit finish and it is exited.
Why does desktop manager not allow you to delete off applications you aren't going to use? The ones I'm specifically wanting to delete are in the downloads folder-mobile video, community, music apps, my-cast weather, MobiTV, MusicID, and XMradio. I'd like to get rid of these to free up some space for other applications I will use.
I have a Blackberry 9700 phone which has been working fine up until today when I decided to load the "Blackberry User Tools" software onto my P.C. at home. After successful installation and machine restart, I was asked to enter my "Device Password". Assuming this would be my password I set originally to lock my phone I entered it and found this didn't work. I subsequently attempted a number of other logical permutations but then realised that if I continued I would lock my phone. So I stopped (at 8/10 tries) and called my service provider "Orange UK" who advised they couldn't help me and that if I continued to enter the incorrect code, it would wipe my phone as it would automatically reset!When I connected via USB last time, it asked for me to enter the word "blackberry" which I did but when it then asked me to enter my password (which I assumed was the four digit numerical code I had originally set the phone with) it failed to work. I am now left with two further attempts. Please can anyone assist by advising me what I can do to overcome the problem without wiping my phone as the contents are very important to me.
I have just bought my first Blackberry.I have downloaded the desk top manager.I am trying to insert a new signature to my emails.There is no email option on the desk top manager.Would anyone know why?
About 3 weeks ago I had to switch from a Curve to the 9700. I used the switch device wizard to do this with no problems on my home laptop. Since then I have backed up the 9700 to my laptop but when I went to do this today, the device is not recognized by my laptop. I have tried just about everything with no luck. I thought the issue may be my cable and/or USB port but I actually connected my old Curve to the laptop and it immediately was recognized. I also have been synching the 9700 on my work PC and drove into the office today to see if I could do so..it worked without any problems. I am therefore not sure by the 9700 won't now connect to my laptop. Any ideas from anyone as to what I should be doing or what the problem is? I uninstalled and reinstalled the desktop manager application twice thinking that may be the problem but it has not resolved the issue. As an aside, I have gotten a message appearing on the 9700 saying that the USB connection does not have sufficient power to charge the device. I then acknowledge the message and it shows it is charging so I am not sure what that is...
I've benn triyng to connect with my bold 9700 (ATT carrier) using the bb desktop manager but there's no "IP Modem" icon for it. I'm using version 5.0.1.28 Nov 11 2009.
Unit: Bold 9700. I run an HP P8600 Windows XP_SP3. All syncs including Media have worked fine...until now. Media Sync has instead, sunk. Have so far done this: Removed and reloaded DM. Removed and reloaded Media Sync (2x). Tried numerous usb ports and swapping usb cables (both original bb). Cleared check boxes from Power Management from usb root hub thingies, many Windows restarts, many battery pulls, ran calfix.exe. Media card is fine and mass storage is turned on. When BB connects, should it appear as a removable drive in My Computer? This is not happening. Problem is only with Media Sync.
my BB Pearl 9105 is not being recognized by BB desktop manager v6 OR v5 windows is recognizing it and it is accessible through windows explorer but completely fails to connect to desktop manager. have re-installed and re-donwloaded it multiple times but its always the same.
So I installed the new OS for the 9700 (5.0.0.862 - Vodafone) and my desktop manager isn't letting me add new media files or anything like that. It keeps telling me that I have to turn on Mass Storage Mode for this to work. I have desktop manager 6.
My phone is an unlocked AT&T Bold 9700 and my service provider is Fido (Canada).How do I fix this guys? I'm relatively new to this whole blackberry stuff.
I dropped my 9700 off the kitchen table last night, everything works fine except that my screen is white, i dont have the money to buy a new screen or i would replace it myself. i am getting a new one from tmobile, what im worried about is when i transfer everything using the desktop manager will it also transfer saved messages ? i have alot on my phone and would hate to lose them.
I have installed the software v5.0.1 then I click synchronizing I can't tick the option synchronizing email messages. this has a grey block in front of the option, what should I do?
I am trying to sync my Yahoo calendar with my Blackberry Bold 9700 via the Blackberry Desktop Manager (version 5.0.1) and am getting the error message "Connection to Yahoo server was lost" when the calendar sync is occurring. The only option on the screen is to press "OK". Once "OK" is pressed, the Blackberry Desktop Manager returns to the synchronization screen. The address book syncs successfully, but the calendar does not. I have tried syncing one way and both ways without success.
A few notes about the environment: I am using the newer version of Yahoo Calendar which I have seen recommended on other postings. I am using standard Yahoo not the small biz version. I have seen this recommended, too.I am connecting my Blackberry Bold 9700 to my laptop via the USB cable that is supplied by Blackberry.
I have a Blackberry Bold 9700.I run Outlook 2010 and Plaxo.How can I get BlackBerry Desktop Manager to sync my contacts and Calendar with either of these applications?
Since this month, I have not been able to sync my BB calendar and contacts with my Yahoo account using the BB desktop manager. The process starts, but it never passes the address book part (it freezes and eventually crashes). I contacted Yahoo and they referred me to their Yahoo Intellisync. Which they don't support. I would switch to Google, but I recently changed my e-mail account; doing so one more time would be bad for business.
I just got this Blackberry on Dec 31, '09.I installed the DM software from the CD and now I was going to attempt to synchronize my phone with the desktop for the first time.When I plugged the phone in to the PC, it immediately said there were updates available and I just kept hitting Next until it apparently started the 12-step update process.Now my PC has been sitting at the download step (Step 3 of 12) downloading the same module for over 30 minutes now.
Amazing feature...now..not only can you backup your contacts as a BB file but you can save them on your PC as normal contacts which have full details (email, numbers, etc.)
You can download version 6 here >>> https://www.blackberry.com/Downloads...247A852FAD3647
At work, we use Novell Groupwise. Calendar syncs fine, but BB Desktop Manager crashes when I sync addresses. I can load one-way from the computer to the BB, but not the other way. I may have a corrupt address, but haven't been able to get it all to work. What do I do to stop this?
Hi when i want to sync my 9700 i am always getting the same unkown error message..DTM is version is 5.0.1.37 The 9700 is up2date as far as dtm is telling me.
I just purchased a BB Bold 9700. I installed the Desktop manager software on my computer, which went well. But when I connect my device, it just hangs, though it shows at the bottom that the device is connected
I just bought a blackberry 9700 yesterday and i am having trouble with the device manager. After installation, i plug the blackberry using the usb into my laptop (windows 7) and it says Device Manager has stopped working and wants me to close the program. I have uninstalled it and re-downloaded it again and again but the same error keeps happening. I don't know what to do!
Problem signature: Problem Event Name: APPCRASH Application Name: DesktopMgr.exe Application Version: 5.0.1.18 Application Timestamp: 4a8f1751 Fault Module Name: DesktopMgr.exe Fault Module Version: 5.0.1.18 Fault Module Timestamp: 4a8f1751 Exception Code: c0000005 Exception Offset: 000e6535 OS Version: 6.1.7600.2.0.0.768.3 Locale ID: 1033 Additional Information 1: 403f Additional Information 2: 403f35dd908937b530ffdc22ba261dd5 Additional Information 3: 9f45 Additional Information 4: 9f455bf85c8eaf21790c645909366eab
After recently updating the Desktop Manager to 5.0.1, the Redirector no longer operates. When opening it, i get the error message."Desktop Redirector has encountered a problem and needs to close. We are sorry..." I've unistalled Destop Manager, reverted back to 5.0.0 and I still have the same issue. This was and is currently setup with my Outlook 2003 (SP3) exchange server to forward my work emails, and it worked up until I updated to 5.0.1 last week.
I am running the latest BB Desktop Software on my PC, "Version 5.0 Bundle 1137". It usually will NOT recognise my Bold 9000. I have tried most suggested measures, including closing Outlook opening the BB software. Perhaps going back to an older version of the desktop software?
I cannot synchronize my Bold 9780 with my laptop via USB anymore because BB Desktop Software tells me : "Blackberry Desktop Software cannot communicate with the connected device".
I've been using my device for nearby a year now and everything went smoothly until recent times although I haven't changed anything in my settings.
My configuration : v6.0.0.294 on my BB device ; BB Desktop Software release 6.0.0.40 on my laptop ; Windows XP Professional Release 2002 Service Pack 3 on my laptop.
I tried to install the last version v6.0.0.546 via the web but my laptop could not recognize my device. Within the Windows Device Manager, my device is identified as an "Intelligent Blackberry phone" (so no USB port issue). The USB cable is OK (I checked with another one and faced the same issue).
Is the problem due to the fact that the release of the BB Desktop Software on my laptop is different from the one on my device ? By the way, this is the case since the beginning and everything went smoothly until recent times.
Hopefully someone can help I'm trying to add apps with DM. When I click the App button I get a popup screen that says I need the latest version of DM and click to update. The link takes me to the BB site for software, but it directs me to the same version of DM I already have. I've even uninstalled and installed again hoping that would help.I read in the BB troubleshooting forum that the most current is 1.0.3 build 23, but the one I'm using is build 19. Which is also the one that is linked to on the site I'm just lost how do I get to build 23?I also posted this in the Mac section a couple days ago, but no response.
I have a BB Bold 9000, and I can't seem to connect to BB Device Manager. It's recognized on my computer as mass storage mode, but it won't connect to Device Manager, and just says Connect your Blackberry device.
My laptop used to be able to detect my blackberry, it now will charge it but it does not give me mass storage options anymore and desktop manager can not detect it. Mass storage mode is turned on. I've uninstalled and re-installed desktop manager but still no luck.
I recently updated my dekstop manager to v 6.0.1.13, but since then it would not start at all. the blackbery screen comes up and then it shows the eror message and asks me to report to microsoft. I have tried uninstalling and installing again, but nothing seems to work. I have xp sp3 installed on my laptop.
