Xperia Z3 :: Phone Doesn't Turn On - Red Blinking LED
Aug 12, 2015
I've got a big problem with my Z3. It was working just fine today I had about 50% battery, though I wasn't going to use it anymore. I'd just put it to charge. I thought I might as well give it a reset now and again as well as clear application processing etc. So I turn off my phone and plugged it in.
I have noticed an odd red blinking LED which I've not seen before (whilst charging), so I thought I might as well turn my device on and see if there is anything wrong. It seems my device refuses to turn on.
I've then consulted the internet to find any way I could fix my device. The only way I was going to be able to do anything was via Sony Companion apparently. So I set it all up and let Sony download was was needed to hopefully repair the phone. Followed all the instruction until I came to this.
No matter how long I hold the volume down button and plug the phone in, it just doesn't want to work. There are no vibrations even when trying to force the device. I've also tried to reset the phone via the hardware button located next to the Sim tray and that didn't work either.
So now I've just left it to charge via wall socket the red LED in the top left corner is still blinking as I'm typing this. Seems I'm stuck with a dead phone at the moment.
Then i try to charge phone, it start blinking red and green lights. Can it be a battery problem, because then i try connect my phone with computer, PC comparison is trying to connect a phone about every 5 seconds, but wont connect.
I have my xperia z3 for about two weeks, not rooted, not unlocked, without any modifications. Yesterday before sleep it was with more than a half of akku, today as im woke up and got it in my hands it was off, im plugged charging cable, was thinking maybe the battery was drained, but nothing happens still, its just blinking red (led).
Was trying to hold power + volume up, nothing. Reset key near sim dont works for me either - i'm just notice 3x vibrations and thats it, its just repeat vibrate 3x times again and again but nothing happens, no boot.
I can't get into my xperia z3 after downloading the new update. I did it yesterday (24/7-15). It only says that Android is starting and that the phone is optimizing apps...after a while my phone doesn't work at all or just restarts again.
My wife has a curve 8530 with Verizon, and it wont turn on. All that is happening is the red led light is blinking over and over again. I tried a new battery and that didnt work. Anny suggestions.
I was taking a picture with my phone when the entire phone froze, then a few seconds later the screen went black. This struck me as odd, as I'm pretty sure I had charged it over night last night. It is a possibility that the battery went to 0% though. However, ever since the screen went black, I have not been able to do anything with it. When I plug it into a charger (and I've tried several), the LED light endlessly blinks red. I've tried every way possible to reset the phone (removing SIM card, pressing off button near SIM card, holding down power and either of the volume buttons). Tried connecting the phone to both a PC and Mac, but neither recognizes that a device is connected.
I had quite a scare since my phone didn't turn back on after I turned the screen off. So I tried tapping it. Tried pressing and holding power button but nothing till it restarted itself. Since I can access the battery, what can I do if something like this happens again? Considering I still have something's on the phone memory.
I wake up in the morning, removing my Bold 9900 from the charger, i found the LED blinking continuously in red and it doesnt respond to me switching it on.
It also doesnt respond to Desktop Software Manager.
I tried a couple of things from different forums, but with no joy. I read this is a well know issue to RIM,
After dipping my phone in water for about 10 seconds at a depth of 15 cm, the touch screen went crazy. Brightness was at its maximun ignoring the ambient light sensor. 20 minutes later the phone was off. I thought was the battery, but before this, the battery was at 60 %. I let it in rise for two days, but it doesn't start or charge the battery. Is dead. Two times, when I connect the usb charger a red led light turns on, but turns off after a few seconds.
Last week I wrote regarding my Lumia 1520, not turning off. As a summary, power bottom doesn't work, nor does the reset option. It freezes and glitches constantly, and the only way to turn on the display is by pressing the camera and volume down button, can't turn it off either. I was advised to reset the phone to factory settings, which I did, however problems still persist. I'm wondering this might be a hardware issue.
i have sonyericson xperia e10i mini and its not turning on even it doesnt show batery sign when i connect to charger, i was restoring its factory setings while conected to charger suddenely its switched off.
I recently dropped my Nokia Lumia 1520, and the top left of the screen is cracked pretty bad, but usually that doesn't stop a phone from working.. When I dropped it the screen froze for about 5 seconds, then randomly shut off.. This is the only phone I have, and insurance is still $200 to replace, and I wouldn't have that for a couple months. I was wondering if there was a way to somehow power it on?
I believe the battery still works, because sometimes when I try to turn it on, the flash blinks, and it gets hot if I leave it on the charger. It doesn't respond when I plug it into the pc, so I doubt it's the display not working...
I decided to reboot my phone because the battery seemed to be running lower than normal, now there's no display at all and I don't know if it has broken. When it's plugged into the computer it is still recognized, but theres no display.
My phone recently today just randomly turned off. I thought it was my charger that wasn't working, but I tried using my friend's charger and it was my phone that wasn't working. I tried charging it again, but now it just shows "Google" and turns off again.
I recently upgraded my Ray to version 4.0.2.A.0.62. Since the upgrade the Bluetooth doesn't turn on at all, just says "Bluetooth turning on" then reverts to an off state. Prior to the update it worked perfectly. Upgrade was done using PCC, no errors, but even so have tried several repairs since and still doesn't solve the problem. Have tried factory resets, rollback to the original version, Sony Update Service instead of PCC?
After I installed TWRP recovery, my xperia Z2 won't turn on anymore. It just shows the sony logo and then the screen goes black...this is repeated over and over.
Why doesnt my s5 turn off when I get a notification or when I check the time On lock screen. This been happening for the past days. I had about 55% of battery and when I got off work it was dead. I then later charged my phone and noticed that when I get a notification on the lock screen it won't turn off right after the notification showed. when I turn on the phone to check the time on the lock screen it doesn't turn off. it would usually turn off seconds later. This has been draining my battery. if I have a full battery at night and disconnect it and throughout the night I get a text message the lock screen would turn on and never turn off,and then in the morning I'm left with a dead phone or a 3% left, or when I disconnect the phone it doesn't turn of neither. How do I set it back to how it was. I already factory reset?
The autoturn option is not working anymore. I've tested the gyroscope, accelerator and they are just fine yet the autoturn is not available for usage. I've also rebooted my phone turned on in safe mode and nothing seems to work.
Why the display doesn't turn?its set up for automatic turn but doesn't work. Also life log did count the steps only First day since than (nearly 2wka doesn't recognize when I am moving or how far I go)...
I just received a used blackberry bold 9000. I still have not been able to turn it on, it is black with a blinking led light (which only shows when plugged in to either the wall charger or USB). It blinks once (red) and then three times very quickly. I can not wipe the hardware because my computer does not recognize the device. Is there anyway to fix this? I do not want to return it if I can easily fix it.
