My xperia z3 was a little low on battery while attempting an update (said it would only be 9 minutes...) and phone died in the process. Â Now the software update failed message appears and i cannot boot the phone. Â cannot charge sufficiently because this continuous boot process. Â tried the power+volume up to stop booting but that didnt work. Â tried to repair through PC companion. Â Told me there was no update available. Â what do I do now!
I ran the suggest os update,after running backup, the os started to load and then run restore , restore crashed phone useless how can i get it back as running restore just crashes
After update to latest firmware today my x10 mini pro cannot load home screen. It come out errorSorry! The application Home Screen (process com.sonyericsson.homescreen) has stopped unexpectedly. Please try again.
This morning, I clicked on Bluetooth widget by mistake which rebooted the phone. Since then it was continuously on boot loop and keeps on rebooting itself after the XPERIA logo.It got turned on once in afternoon after which i did a factory reset and it was working fine. In eve I tried to turn the Bluetooth on and it is around 4-5 hours my phone is still rebooting continuously.It is Android 4.0.4 and never rooted, minimum apps, all are from PlayStore only.
Today i tried to do a firmware update with odin. My phone crashed and odin failed. I now have a message on my phone saying firmware upgrade encountered an issue. Please select recovery mode in kies and try agan.
As I was updating my N900 to the newest firmware, my computer crashed (not because of the install, I was running other hardware intencive programs.) and I'm 100% sure it wasn't finished installing the firmware when it had crashed.
But when my computer crashed the phone seemed to running normally and when it was finished installing it worked fine. Is it possible that it didn't finish?Either way just to be on the safe side, how do I reinstall the update to be 100%?
My Xoom said an update was available last week and every since th update was applied the boot process will not progress past the Motorola logo with "Dual Core Technology" below it. How to make my system functional again?
I have Nokia 5800 xpressmusic with Rogers service in Canada. The software version (firmware) on my phone is 21.2.025, and I believe the product code is 0581779. When I try to update my phone by using the Nokia Software Updater, it said that the current version on my phone is 21.2.025 and the latest version is also 21.2.025. So how can I update to V40?
I made updated to the latest N900 firmware but the installation stalled on the last 1 sec. Now phone won't boot. I already got a dektop charger and charged the phone and reflash with the 51.1 (pr1.1) update but nothing happens.Tried reflashing couple of times but I always got the same result on the cmd.My OS is Vista 32 bit. I'm trying to update with the US version. Is this going straight to the nokia repair center?I don't know what's going on. battery was fully charged.
I made a software/firmware update for my Nokia N97 last night thru the Nokia Ovi Suit update but for some reason my phone that was region and operator free now it has a Vodafone operator logo when starting up the phone and it has some Vodafone menu elements on it and i cannot understand for what reason the official Nokia firmware which should be operator free contains these elements But however my biggest problem is that i cannot use my phone to make or receive anykind of calls only messaging works.
I updated the W995 firmware yesterday using SEUS. After update firmware is R1HA035. But according to the forums on this site the latest is R1HA036. Why didn't I get the latest? Also after update I turned my phone on and I got the long please wait message. During this message I got a pop up message for Daylight savings update and I selected yes then back to the please wait message. Then phone started normal. Did the pop message effect the firmware installation and shall I reinstall firmware or is everything ok?
After the latest E72 firmware update, the new embedded SmartConnect does NOT work at all. It simply does not realize a connection! Did anyone get it to work?
I have a 5800 Xpress music phone.I updated the firmware yesterday to the latest version (V40.0.005). And also added some songs from OVI suite. Now my music player hangs all the time. I dont know what to do. And need to restart the phone again to get rid of the problem. Sometimes even if i restart it wont work. Then i need to remove the battery and then restart.
I got a new Elm (T-Mobile Germany branded) some days ago and after trying all functions (no problems found), I had it updated to the latest firmware R7CA061 with SEUS. (I've found some threads concerning Elm and GPS-problems in this forum, but they weren't connected to R7CA061). After the update, GPS does not work properly any more, or in other words: it does not really work at all! Neither Assisted GPS (I only tried A-GPS using WIFI) nor unassisted GPS does work. I do not get a lock on my location with Google Maps, also after waiting for more than 10 minutes.
My GPS-position is "jumping around" on the map about one kilometer around my actual position. It's completely inaccurate! I have the feeling that it's even getting worse after some minutes. I also tried the GPS test in the service menu: doesn't work! Switched GPS off and on again: doesn't work! Tried AGPS and GPS: doesn't work! Completely shut down and switch the Elm on again: doesn't work. After reinstalling the latest firmare using SEUS once again - GPS works (assisted and unassisted) and also the GPS test from the service menu works properly. But then, after some minutes, GPS seems to fade away again somehow.
So the last few days I've been having a severe issue with my iPhone 4. Basically, it restarted on me out of no where, and now it's just in a continuous boot loop. It flashes the dimmed Apple logo for roughly 8 seconds, goes black, and keeps doing it over and over.Â
I've searched Google and the Apple communities high and low, tried all the solutions, nothing work. I've tried restoring via both DFU and recovery mode, and nothing works. I keep getting Error Code 21 and 3194, and various others.Â
While in recovery mode, with the USB cord and itunes logo, iTunes will detect that it's in recovery and tells me it needs to be restored.
So, I click restore and update. iTunes extracts the software, then goes to the "waiting for phone", and just keeps going into a boot loop again.Â
I've tried TinyUmbrella to see if that can fix the boot loop issues, but it hasn't worked. Tried on several different computers, with different cords, and nothing. It's not a jailbroken device, or water damaged or anything.
I've deleted the gsp Apple jargon in the host file in my Windows>system32>drivers>etc folder, adding the hashtag to it, etc. Nothing is working for me, despite all the people replying to posts/solutions saying it works for them.Â
I was running iOS 7.1.2 perfectly before it had restarted and did the boot loop. It's now currently plugged in, with the connect to itunes screen.
After updating to updating to 2.0.2.A.0.24 i cannot connect to the google server to set up my account. All i get is messagesaying i cannot connect to the google servers.I have tried with Wifi and 3G
So I restarted my phone a few minutes ago. When it powered back up I get a warning: "Unfortunately, the process com.google.process.gaps has stopped". I hit ok, but the warning just pops back up. It stays off long enough for me to power off and back on again, but that's not working.
last two days i got my new z3 devise my first android handset after update i experiensed two problem first was the blank black screen and the notification and quick setting panel was not sliding properly so i decided to reinstal android using sony pc companion after update i switched my phone itkeep restarting continuously every time start installing progams it show customizing apps and then restart and do the same finally i could fix it when i got my 64gb sd card out of phone and switch it on, it work good with no issues.
This is an error that i noticed the last weeks ago how u can see in the video my smartphone crashed. I have also updated to the latest firmware. Does it happen that the smartphone do too much and just reboot?
After updating to latest firmware, the contacts have disappeared. If I search I find the names and numbers but they have failed to list in contact now.
My iphone 5 crashed suddenly while functioning properly!! I connected it to my pc so as to restore it!!! Itunes recognized the device and a message that it needs restoring emerged!! i followed the proposed steps to restore it!! It was running ios 7.4 i think!!! Ios 8.01 was downloaded and afterwards it extracted the previous version!!! while waiting from the iphone so as the procedure to go on , the apple logo appeared with the progress bar!!! But after waiting for too long it did nothing!! The bar was empty and it seemed as it was stuck!!
I tried to do it again!! After this i tried to enter it to dfu mode again in order to restore it!! But i couldn't!!! I tried the known combination of its buttons to do it!!! Nothing at all!! I reconnected it to itunes !!! The device was recognized and a message that it needs restore appeared!! I followed the instructions!!! Ios was extracted and while itunew were waiting for the iphone to continue it happened the same thing again!! Apple logo appeared with the empty progress bar empty!!! It seemed as being stuck or not responding!! Is it a hardware problem? Or is it software??? Is there something i can do to make it work properly again???
My calender crasched after the update, ( com.android.calender" failed") How to do to get it back ? How to make MW600 + mediascape to work together ( start/paus, fwd , bck will not work )
Last night I did the update to my phone as i kept getting a msg in the drop down tab telling me to do so.Anyway half way through the update i got a msg saying an error has occured pls restart update.......however the phone is now not working at all.When it comes on i get the sony ericcson across the middle and it then goes to a half black, half green (with slight pattern on the green section) screen and turns itself off after a few seconds.I am LOST without my phone. Have tried connecting it back again, but once it automatically turns on and this strange screen appears it turns off.
I was updating my firmware as i do normally not realizing that my battery is not even 50% full the update failed, since then it wont boot up only the camera LED light is coming on do you guys know what can be done to repair my phone.
Just wanted to verify with you all before I take some action on this Iphone 2G.
My friend gave it to me in hope i can update it to the latest firmware and also jailbreak.
At the moment it has 1.1.2 firmware on it, and some apps like anysim, bosstool, ssh, installer - guess these were used to jailbreak it days ago.
So just to verify, this is what i should do? 1) Backup the current software just in case. 2) Download the 3.1.2 version. Install it on iphone. 3) Download the cracked new 3.1.2 version 4) Jailbreak it with pwnage tool. 5) Done
I was updating to ICS using PCC when my computer crashed.Now when i try to turn on the phone first Sony logo appears and then something like warning sign and little phone below .
Today Morning I have connected Xperia X10i to the computer PC Companion popup opens for 2.1 update. I fallowed the instructions and took backup in the third step after downloading new software while updating a popup window appeared "unable to Update try later" the phone is still connected to the PC and Internet connection is also fine. I have disconnected from PC then it is asking for step 3(switch off phone then press and hold back button step) again did that no Luck. Now the phone is not starting at all I think it formatted all the software..My phone is almost in dead condition. Now if I connected to the PC it is detecting as a mass storage and PC companion is not at all recognizing
During the boot process, my status bar hangs about 2/3's of progress. Directly under the "E". After a few minutes, it will then continue. Anyone else notice this on theirs?
So i bought a motorola photon 4G from ebay 5 days ago and had it shipped here to New Zealand. I'm loving the phone but there are a few problems.
When i first switched on my phone (i got it today) it said contacting network, faor quite a while. I was patient and thought this was becuase it was the first time switching on this device. Then it said it couldn't activate the device (sprint). Fair point, because the network was not setup.
So after a while i was able to setup New Zealand's vodafone settings and got my 3G connection working and had data working too. I then swithced off the phone ad turned it back on again. This time it still could not connect to the network and now my settings don't work. Calls and txts work but my data doesn't... not anymore.
Also is there a way for me to get rid of sprint's activation process when i boot up the phone?
