I have a Z2, but I cannot connect to wifi. I have tried restarts, I have tried factory reset, I have run a diagnostic but the wifi simply wont switch on and therefore I cannot get the phone to scan for networks. It worked briefly after I updates to latest firmware but that only lasted 5 hours.
View 3 RepliesAfter the update, all of a sudden I get the problem that as soon as I turn on wifi I get the message "unable to scan for networks" and then it switches wifi off.
View 4 Replies View RelatedI hgave reset network, reset phone, hard soft shut down, plugged it into the router-time capsule, and nothing. It just keeps on spinning around and around. I do not have a VPN network, but I tried that, and still nothing. My office is where I have wifi-plus their are 10 other wifi's in the building it used to pick up, now nothing. Even at home nothing. Just spinning and spinning.It is 2 weeks old. I bought it in Canada, and am now in Africa. I purchased it factory unlocked, and it is running the 5.1.1 software. I don't want to take my phone to the apple resellers, as I bought it at an actual Apple store, and I don't trust the guy here in Tanzania. Is their anything that I have missed that I could possibly do? If you say fixed or static IP, I have no idea how to do that so if you could explain where that said IP is so I could utilize it, and how do I input it to my phone. I'm thinking that is my last hope. Other than that the chip or antenna are fried somehow-even though it is brand new, and has had a case on it the whole time.
Info:
iPhone 4S, iOS 5.1.1
i had my x10mini since last christmas and about 2 months ago i had problems with my wifi whenever i go to turn it on it says `unable to scan for networks` and yes i have updated it.im starting to think to swap it for a blackberry
View 3 Replies View RelatedMy sony experia mini will not connect to wireless networks. It says it is unable to scan and then wireless turns off automatically. A lot of the time it is unable to connect to 3G either.
View 1 Replies View RelatedWhen i turn wifi on it says 'unable to scan for networks' so now i cannot access the internet now.
View 2 Replies View RelatedI have an xperia x10 on at&t (still only with android 1.6) and it has been working fine until a couple of days ago. My wi-fi has been working fine (except for the occasional "unable to start wifi") until one day it just stopped working. I was connected to my home wifi network when all of a sudden it just disconnected. I proceeded to go into my settings to turn it back on, however, when I checked the box, it turned on for about 5 seconds then turned off and said "unable to scan for networks." I have tried everything I can to get it back to working. I have tried:
-Taking out the battery, sim, and memory card for a few minutes. replacing them all and restarting the phone. -doing the above but while everything is out holding the back key for 30 seconds, then putting everything back in and holding the power button for 10 seconds. -Plugging the phone into my computer
The only thing I haven't done is the factory reset. I do NOT want to do this because I have heard that it only sometimes works and if it doesn't work, then I cant't get any of my apps or anything back on my phone and it will be completely useless to me. I do not want to lose all the data on my phone because I have no internet currently, and therefore can not backup anything.
What I don't understand is why the wifi isn't working? I just got the iPhone 4S yesterday, I already have an iPhone 4. The iPhone 4 is consistently using my home wifi while I am at home perfectly. My iPhone 4 is updated to the latest software too iOS 5.1. My iPhone 4S will not connect to wifi. I am entering the right WPA user & pass. It is updated with iOS 5.1.
My iPad, iMac, Macbookpro, & iPod ALL have no trouble connecting to my home wifi. I do not understand how this is a wireless router issue when it works with all of my other Apple devices BUT the iPhone4S? I have tried everything under the sun, restart reboot, turn off, turn on, switch network off, switch it on, reset this, reset that?
Info:
iPhone 4S, iOS 5.0.1
So, I got my iPhone 4s brand new from apple.com (UK) on christmas day, from then I had no problems at all with the iPhone although a week or so ago I lost my connection to WiFi. When you go to Settings>WiFi usually you will be given quite a few options ( your own WiFi and neighbours), this has always worked for me but now it doesnt, I get the message 'Could not scan for wireless networks'. I've looked in the forums for resolutions but nobody seems to have any although this problem is popping up for quite a few people! I dont have access to an apple store for help from an assistant which makes my situation even worse! I have never dropped my iPhone 4s and have never put it in water either, so has anybody ever had this problem and found a fix? I have also tried reseting my iPhone completely and done the same with my wireless 02 router! Turning on and off again, most things you could think of i have tried!
Info:
iPhone 4S, iOS 5.1
I've already done a hard reset, and I've also reset my network settings, but my wifi is still having problems. Also, this is for every single wifi spot. Whenever I go to the wifi section in my settings, my iPhone 4s will continue to search for wifi, and it won't stop! If I try to connect to the wifi by using the "other" (which you have to type in the name of your wifi), a message pops up saying "could not scan for wireless networks". Another thing to add is that it's not my wifi because none of my other family members have problems connecting to the wifi on their iPhone 4s'! I am at 1.1 gb of my 2 gb monthly allowance while I still have 20 days left, and I also just noticed that since this problem started, my phones battery life is shortened 2 to 3 hours!
Info:
iPhone 4S, iOS 5.1
I just got my new Ray yesterday. Automatically with the pc companion it upgraded to ICS. I tried today to connect it to my wifi. I go to Settings > wireless and networks > Wifi. I turn it on, in the next screen I click on Scan - and nothing. It wont scan and so wont connect to any wifi network.
View 1 Replies View RelatedI have a problem with the WiFi in my mobile it is Android 4.0.4. When I try to connect to a WPA2 secured WiFi the mobile try to connect about 5 seconds. Then it disconnect and scan and it keeps trying to connect and disconnect and scan.
View 1 Replies View RelatedWhen I am in the Room with the Router Network connection is really good, when I go to another Room in my Flat it is almost never available or too slow to surf any Website. So far it could be the Router.. But at the Same time my husband Has a much better connection and Performance with his HTC as well as friends with an iPhone.
built 23.4.A.1.232
Modelno 6503
Android 5.1.1
This problem came 2 days before. when my frdnz phone detected 5 wifi networks and mine 0. i first did Settings reset it dint help then i did Factory reset it dint help. then i updated my neo V to ICS and still it is not working.
View 4 Replies View RelatedI want to surf the web on my X10i using my company's Wi-Fi.I was able to connect to the netowork fine, but I could not enter the Proxy settings to allow me through. Any ideas how to do this? and please don't tell me it is not available because I might as well reutrn this phone because I just bought it few days ago.
View 2 Replies View RelatedI just got the new Xperia Z3, it has lots of software issues. One of those is the fact that it doesn't remember Wifi networks anymore. I have to re-select the network and re-enter the password every time.
I have read that removing all remembered Wifi networks works, but this solution is unacceptable to me as I travel a lot and have over a hundred networks remembered in my Google account. I'd rather stop buying Sony products than have to re-enter those networks again.
Whenever my phone (HTC one M7) turns off it forgets all wifi networks i have signed into, meaning that when it switches back on I have to type in passwords again. This has been happening since i upgraded my software to android lollipop 5.0.2 ....
View 3 Replies View Relatedi have a problem with my 920F... it doesnt show any unknown wifi-networks, it only connects to known ones.
"Wifi overview 360" app finds them all, but not android stock wifi app. which systemfiles i should check? (i have root)
When trying to scan for networks always said "no network available" because I want to listen to fm radio
View 4 Replies View RelatedI got my iPhone for Christmas, and it was connecting to available WiFi, switching from 3G to WiFi, fine until May. I have tried the recommened resolutions on the Apple site, such as Resetting Network, turning on/off WiFi, but none have worked.
Info:
iPhone 4S, iOS 5.1
Does anyone have any ideas why my Desire has suddenly started saying "unable to scan for networks" I don't think I have changed anything, the WiFi widget keeps turning itself off, and my home network is still working for other gadgets.
View 1 Replies View RelatedMy phone will no longer automatically connect to saved WiFi networks. It knows they're there, because if I go to Settings -> WiFi, it shows up in the list as a "saved" one. Tapping on it and selecting "connect" does nothing. I have to turn off the WiFi and turn it back on, and it will then automatically connect.
Additionally, WiFi will not stay off. If I'm some place I don't want it to connect to WiFi, I turn it off so that I don't get messages that networks are available (specifically when I'm driving, it's really annoying to deal with that over Waze).
I've got a Sprint GS5, running stock (not rooted), on 5.0. No updates available for the phone. It does this on every WiFi network I have saved (home, school, and school apartment, among others). I've also tried turning Smart Switch off and on, it makes no difference for either issue.
I was very happy with my xperia mini pro till yesterday but I was disappointed today very badly
when I am turning On my WIFI it just done and didn't search any networks and didn't show any icon that its On. What I can do now? It just simply not connecting.
My service provider is Three UK. I'm currently on a trip to Switzerland where my screen broke, and after being screwed around by the Swiss repair factory that Sony uses for three weeks, I've finally got my phone back, except now it's not connecting to the available network (Salt.). The networks show up in the list of searches, but after spinning on "registering on network" for a few minutes all I get is the usual "can't connect to network, please try again later" nonsense. The wifi works, however. I've tried repairing it with Sony Bridge for Mac, still nothing.
When I had a Z2 I had a similar issue once after sending it off for repairs for a broken screen- the repair people dinged up the internal antenna during repairs and it wouldn't connect when it got back. I sent it off again and they fixed it. Could this be the problem now, even though the wifi is working? I have a flight back to the UK in a day and I don't have time to send it off to the same company.
When I'm not at home, I have my wifi turned off, yet I still get the "network connection available" notification. I turn wifi off, and a minute later, it's back. I checked my settings, and it shouldn't be doing this.
View 8 Replies View Relatedmy i phone cant scan for wifi
Info:
iOS 5.1.1
hey i am having a windows phone 7 nokia lumia 610 and i am wanted to connect my phone with an ad hoc network that is wanted to connect internet through my laptop .as i have created an ad hoc network but it can't seen in my phone.
View 1 Replies View RelatedUnder my wi-fi advanced settings the option is given to "always allow device to scan for wifi". Do i want this on or off?
View 5 Replies View Relatedmy iphone 4s can not scan any wifi network, i tried everything but still can not scan any wifi connection even though our wifi is working properly in our mac book and ipad.
Info:
iPhone 4S, iOS 5.1.1
Why cant I scan for wifi. I have tried resetting it many time I tried to start new would not work and this happen when I updated my 4s to 5.1.1.
Info:
iPhone 4S, iOS 5.1.1
I have "Show WLAN availability" set to on. The question is - does it scan for WLAN when the display is on or all the time, even when the phone is in standby and the display is off?
View 1 Replies View Related