I cannot seem to find a setting to adjust the volume of the tone that the alarm clock makes. The alarm volume is very soft and not loud at all. It doesn't wake me up.Could someone please show me how to adjust the volume of the alarm clock? Please?
There are + and - buttons on the right side of Nokia X2-02 which you can use for adjusting the volume. Using these buttons you can adjust every application, accept the alarm clock. There isn't also an extra option in the advanced menu of Alarm clock for volume adjusting. While ringing the alarm cannot be adjust using the + and - buttons because when you press them, the alarm just snoozes. The + and - buttons while you are in the alarm menu don't adjust the volume too. But when you set the radio as alarm clock then it works - the volume is so loud as the phone ringing settings. There is also no extra option in the Settings menu for the alarm clock.
I am using on of the song I have downloaded onto my phone as an alarm clock tone. The volume on the device is set to a minimum yet the alarm volume is extremely high - too high to be waking up to. How do I adjust the alarm clock volume.
Why is it that the alarm volume does not change if you change the phone volume setting on the 1-30 scale. The alarm volume level is insanely loud, and s always the same whether you phone volume setting is on 1 or 30.
It would be very nice if the volume of the alarm could be changed as well as currently it scares the s..t out of me every morning when it goes off.
Lumia 900 failed to wake me up this morning. The alarm just did not sound at all.
- Alarm was set and was shown to be in use. Even the Icon in the start screen was shown - Tried multiple times afterwards setting the existing alarm a few minutes forward. None of the attempts alarmed.
How I set the alarm is that I always edit the existing alarm, edit the time and push the alarm on.When I tried creating a new alarm (a few minutes forward), that ringed ok. But the existing alarm failed to ring
Since I installed the maemo update, my alarm clock is not working anymore. well, it's working, but it doesn't make any sound. I tried to change almost all possible settings concerning sounds on the phone, but it still doesn't make any sound.Does anyone else have this problem? Or a solution?
When I set the alarm clock on my new 2700 classic, it does not sound or vibrate in the morning, and the alarm bell symbol indicating that the alarm clock is set has disappeared?My dad has the same problem with his Nokia, it may be the 3610 fold but I am not sure. We have both had many Nokias before and never had problems with the alarm clocks.I searched the discussion boards for similar topics but found no threads?
I have a black nokia lumia 800. The firmware version in 1600.2483.8107.11501 (still waiting for 12070 one). Battery is ok, sound quality is horrible, but my real problem is the alarm clock - it just doesn't work! I rely on my phone to wake me up for work and it doesn't do the job. I've tried renaming the alarm, setting it to repeat on couple of days or just one time and it doesn't go off. The alarm worked perfectly on my HTC HD7 (the sound quality was also great on this device), but since I've switched to lumia I have to put up with more and more problems
Is there a way to snooze the alarm clock without having to open my eyes and do it via the touch screen. I use to be able to press the red button on my previous phone.
I got a problem with my 5230. Everytime I want to open clock or configure my alarm, it said "System Error". I can do nothing with my clock, as I travel to foreign country and need to reset my time (I turned off the Automatic Updates). Also, my alarm can't be removed since I can't open the clock. Here's my specs (Info from *#0000#):
-soft. ver. 20.0.005 -ver. date 23-03-2010 -model Nokia 5230 -type rm-588
I recently bought a Lumia 800, and found that the alarm clock only works when the phone is ON, but it doesn't work when it's OFF. Is there any way to change this setting? obviously it doesn't make sense to have the alarm which is only working when the phone is on, as I don't want to leave my phone on overnight.
I recently baught the n97 mini, and I can't figure out how to put my personal sound file as a ring for the alarmclock. Does it mean it is not possible and I have to wake up with the tones that already were saved on the mobile?
I already have my musique saved, and I was able to choose my ring tone among my files so I think I'm missing something regarding the alarm.
I recently purchased the 5230.I set quite a few alarms, and need to silence them without taking the 5230 out of my pocket or out of the carrying pouch and swiping the face or rotating it. Most other phones allow you to hit a button on the side to silence it. It is annoying in a meeting when I can't silence the alarm quickly.Does anyone know of any apps out there that would allow me to stop the alarm using the easily accessible volume button? Also, if you know of any apps that would give me more user controls. For example, I would love to be able to lock the camera button until I unlock it with a menu item.I gave up my old phone because of this alarm silencing issue. I may have to do the same with the 5230. I have 90 days to turn it back in to Costco.
One thing I have noticed with my new iPhone 4 (and I am guessing it is an iOS 4.0 thing) is that my ring volume affects the alarm volume. On my 3Gs, it did not matter what my ring volume was set at, when I set the alarm to go off, it played at full volume which I like. I am always changing the volume on my ringer depending on where I am so now I find that sometimes it is on low when an alarm goes off and now I don't hear it.
I can't hear any alerts and the volume doesn't adjust when I push the side buttons. I do not have the sounds locked and I have the feature on to allow adjusting the volume with the buttons. When I push the side buttons the ringer icon comes up but the volume wont adjust.
I want to play music on iPhone in my car so connected via auxiliary and while this does work, I can barely hear the music even after increasing car volume control to the max.
How do I adjust the volume for the phone recever on the IPhone 4? All the sounds work fine except for the receiver. I can hear a phone call or voicemail with the ear buds and remote mic, but not through the receiver.
My iPhone 4 has developed a weird quirk. Last night is seemingly turned it's volume down on it's own. Now I am unable to manually adjust the volume. I have tried all the tricks: reset phone; restored phone; mute switch is in the "off" position; and under the Sounds settings "change with buttons" is "on"! To make things even more strange; when I received a phone call earlier I could hear my ringtone; but, no other tones are audible (messages, etc).
I bought two X8 and they are facing the same problem. The in call volume is low. I have to pressed the side key to higher the volume when making call. After call the volume is back to low. That mean every time a incomming or out going call I have to press the side key to higher the volume. I install volume application to adjust the volume and it work fine but when I connect and unplug the USB connecting phone to PC the in call volume become low.
I have the Motorola car dock, and when the phone is docked, the volume buttons do nothing. I want to turn up the volume on the phone becuase even when I trun my radio up all the way, the volume is still not loud enough.
If I undock the phone and just use the headphone jack, I can turn the volume up and down on the phone.
So for some reason, the dock disables the use of the buttons.
I use my iPhone's alarm clock to wake up on weekdays. Twice now, it has failed to go off in the past week or two. When I look at it, it's "Off," but I haven't turned it off. In fact the only time I ever launched the clock app was to set up this alarm, except when I've had to turn it back "On."
Of all the bugs, this one really bothers me. I just deleted the alarm and made a new one. Hopefully, this doesn't happen again.
I am a long time Android user, but just recently got the LG G3 (32GB version) with Bell Canada. I had a Samsung SIII for the past few years and upgrade time came. So I did my research, found the LG G3, and so far I've been very happy.
There is one issue, though, that I have found with the alarm clock. I first noticed it Saturday (I got the phone Friday), set up the alarm clock app, and made sure it worked (by setting it 2-3 min in the future and waiting). Saturday morning, I found myself naturally waking up, I didn't think much of it as that is normal for a Saturday. Then I realized that it was around 9 AM (the alarm was set for 8 AM), I asked my wife if she heard it --- she said, "no". So then I set it for a few minutes in the future again, "must have slept through it", I thought (even though I could wake up to the SOUND of the display coming on).
Sunday morning I got woke up by the kids at 6 AM, but noticed that the alarm DID go off at 8 AM (the difference being that since 6 AM, I had the device unplugged and had been using it).
Today, I had my alarm set for 5:30 (my normal waking time during the week), I woke up to the sound of my wife's alarm at 5:45, mine definitely did not go off. I rolled over and opened the alarm app --- everything is set up properly. So then I figure that I'll set it for 5:50, do so, and it goes off at 5:50, I snooze it and it goes off at 6:00.
This morning I installed Alarm Clock Plus, but I won't know if it works properly until tomorrow morning. All my Stock alarm settings are correct, I DO have Quiet Mode turned on for the duration of the night (10 PM -- 6 AM), but some of the tests I ran (eg the 5:50 one) were ran during Quiet Mode. In Quiet mode I have "Block alarms" unchecked. Under the stock Alarm Clock's settings I have "Ring in Silent Mode" checked as well.
I set my alarm the night before and by the time morning comes the alarm is turned off by itself. The icon goes away and I have to go into the clock app to turn it back on.