Motorola Milestone GSM :: Caller Screen Not Appears
Jun 6, 2012
I had to replace the Digitizer Lens and the Flux Code with new ones in my Milestone A853.After the replacement every thing is working fine except one thing.Whenever I make a call the screen goes black on connecting the call.I can't see the caller number or Caller Screen.But when I slide the HW Keyboard slightly the Caller Screen appears.What is reason for this?Is this connected with the Digitizer or any other issue?And what is the remedy for this?
I own a French Retail A953 Milestone 2 and I'm looking forward to android 2.3 update. So, after followed the thread [URL]and it's on ! The update is here.Unfortunately when trying to update my mobile using MSU the answer is "no new update availlable yet for your mobile"...I'm using A953 with Android 2.2.2 and the system version is Version.62.4.24.A953.Retail.en.FR.
is there anything i can do to improve flash video playback? after the 2.2 update i was excited to be able to use flash on my phone, but video playback on it seems so bad that it's unwatchable.it's like a slideshow at best, and at worse i'm only getting one frame every thirty seconds or so. oddly enough the sound never skips or stutters at all.i've tried it over wifi and 3g. Internet videos in the native app and other non-flash streaming media seem to work perfectly.i'm using the stock browser with flash player 10.2.157.51 (the latest one available in the android market), and i've tried several different videos linked from m.flash.com
I updated my Milestone which is UAE version to Froyo yesterday after a long delay, was really excited all evening until i discovered two problems with my wifi.The Device does not connect to the corporate network as my office uses 802.1x EAP and there is no place to enter proxy where as my friends using samsung galaxy s (Froyo 2.2) connect to the network and browse using the wifi advanced settings to enter the proxy in their device.
I have a problem in my milestone. Im trying to update my milestone to froyo from eclair 2.1 update 1 via MSU (Motorola Software Update). But after some minute It restart with a blank screen then reboot to OS and MSU says update failed. My last resort is to flash it via RSDLITE but when im trying to get into bootloader it shows blank screen then reboot to OS. I cant enter to my bootloader.
I rmb someone else reported this but I can't find the post. who else had this problem? the left side of my touchscreen when closed has a gap now with the keyboard to the point where if i press on the touchscreen, it will depress and "click".it's getting really annoying and i'm trying to "bend" the slider back so it doesn't but obviously that doens't help.
I have a moto milestone which I am using for last five/six months. Recently I realized that it's hardware keyboard is getting harder to slide out. While sliding out, it felt like it is brushing somewhere inside or the feeling was as if it needed lubrication.
I made a huge mistake (which I realized afterwards) of putting a drop of very thin high grade oil on the slider rail. Although it was only a single drop, it sipped through from inside the screen. After three days, it has started showing. The bottom portion of the screen looks like there are oily stains from side. The touch screen functionality has NOT got affected at all. But it is looking bad when the screen lights up and the background is white.
Have a brand new install of Windows 7 64bit and a 6 month old Milestone 2 which has always succesfully connected to PC/Mac in USB mass storage mode, but when trying to connect to new Windows & PC the PC tries to install MTP drivers that fail.Solution is to select the failed device in device manager and manually install the driver selecting the device as a USB mass storage device and not the default MTP device.
1) I used to use the incase slider case for my iPod and 3GS. Loved it. Anything like this for the Droid? Unfortunately it's a slider phone so there's probably gonna be a tough time getting a hardshell case.. Anyway, what's a good case? I know there's always "that ebay case" but this applies to any phone. With iPhones especially there's a good number of quality reputable cases. What about for Droid?
2) Screen protector necessary? I see people go forever with iPhones and no screen protectors yet their screens are nice. Yeah, coated glass is hard to scratch like camera filters. What about the Droid's screen? Should I get one? I may just order Bodyguardz/Invisible Shield.
I have a milestone, and love the thing. Just today it started operating and running by itself. what i mean is when i unlock it, its opening applications, opening settings and just operating its self without me touching. This is not accidental cause i can see it right on my hand just doing all soughts of things like opening messages, playing music stopping and reshuffling and as if Ãnvisible hands' are operating it. sometimes its too fast that it hangs, becomes unresposive. i thought it was deu to the applications i downloaded
I have a slight problem with my Milestone XT720. When I lock the screen (whether I just lock it using the power button or I wait for it to lock itself or I set up the code to lock the phone) after a while the screen lights up for a few seconds and after that it fades to black again. This happens 3 or 4 times in a row and then again after a while (maybe 10 or 20 minutes). I own this phone only few days and haven´t got completely in grips with it but I could not find any setting that would turn this off and neither I found anything useful in the user guide. Is this something I can fix by disabling something or is it a fault of some kind?
Personally, it does not bother me that much but I imagine it shortens battery life a bit so I´d rather sort it out.
I upgraded to 2.3.4 Gingerbread about a week ago. System version is 64.1.22.A953.Retail.en.GB No problem for the first few days but since then the screen switches off randomly (that new CRT-style shutdown, very cute). I can be viewing Google Maps, or using the camera, or browsing the web...doesn't seem to be a single trigger. The screen turns off and if I switch it back on quickly it will switch off again; if I wait a few seconds and switch on then it stops freaking out and the screen stays on.I've been using Cloudskipper and WinAmp with the lockscreen features enabled (since the stock music player on Milestone2 doesn't show up on the lockscreen). Could these be the culprits - is there something unstable in 2.3's lock-screen?Screen timeout and security timeout are set to 60 minutes.
1. I installed the MLB At-Bat '12 app and noticed the sound quality is not good. I have sent feedback to the maker of the app, but not sure what the problem is. It reminds me of playing a cassette at a slightly slower speed (I know, some of you are going to say "What the heck is a cassette?"). The announcers voices are off, like their voice got deeper and are speaking slower. Not sure if this is an audio driver issue or app issue. Doesn't matter if its on wi-fi or not.2. lately my phone has been active very laggy. Switching screens is slow, sometimes the icons take a second to show up, and god forbid I am listening to music from my sd card, because it will get the skips.
3. I was taking some video this week and on two seperate days the screen froze for a couple seconds then showed action again. When I playback the video it skipped at that point, as if a couple seconds was chopped out. So it wasn't that the screen froze, it appears the process stopped. I got a force close error also. The first time, I rebooted my phone, then my phone decided that wasn't good enough and rebooted again on its own. The second time it happened I rebooted, only once this time, and it recorded normally after that.
Quite a few of these issues can be corrected by going in to the task manager and ending task on apps that are loaded but not being used. However they just come right back, so it is almost pointless. Before you ask, I have done a couple factory resets along with a cache wipe a couple months ago. It is a real pita getting the phone set back up the way I had an d I dont want to do it again anytime soon. I dont have a lot of unnecessary apps installed, but I do have quite a few, and I use them. It doesn't matter whether I am on wi-fi, have gps on, or bluetooth on.
I really had planned on this being the last phone I buy for quite a while, even buying the car dock and hd dock. I am starting to get concerned that the "most powerful smartphone on the planet" isn't going to last and cant handle mundane tasks. I suppose if I was just goint to text and make calls, it will, but while a lot of the issues are really just small things that are an annoyance rather than a hinderance, it will most likely affect my decision on how long I keep it. I really hope care was taken to develop ICS to help with the issues being seen on this site. It is too bad that those of us with issues cant have our phones be the test-beds for the development, rather than the phones they are using in the lab that most likely have never had an issue.
I recently purchased a ZAGG screen protector full body armor for my Milestone. I followed the given instructions and left the phone for a few days for the protector to completely attached itself to my phone. The problem is and im not sure if anyone else noticed but when i turn on my phone. I noticed that the display seems to have that red/orange effect but especially worse on a white background. It seems like a red/orange rainbow crystal effect, like tiny crystallized red dots all over the screen. I decided to leave the phone for a few more days that perhaps it is just the solution but it is still there. So, i removed my ZAGG and replaced with a new spare ZAGG (I bought 2 ZAGG protectors.) and this time, I tried it out WITHOUT any of the solution and still no luck.
I phoned ZAGG customer service and they said that it could be a defective ZAGG product. I am still waiting for the replacement and decided to get another second opinion from another customer service. She mentioned that it could be becuase i put too much solution but I did try it out WITHOUT the solution. So now i wasted 2 ZAGG protectors and no luck. Anybody else here in HF has put on a screen protector on a Milestone having the same effect as mine?
After spending 2 hours on the forums and 2 hrs on motorola website, downloading the motorola software update and finding that the updater says that your phone is up to date with 2.1 (where as the motorola site says 2.2 is now available) and browsing thru unending discussions, I was unable to update my Motorola milestone to Android 2.2. I last week sent my phone to the service center to ask them to update it to 2.2, they returned the phone saying it is up to date.I am sick of removing applications and always worrying about the remaining ROM availability. [code]
If the official version is not available in Dubai can someone tell me of a shop where I can get it updated, as I dont really understand the concept of rooting and stuff like that.
I had the tour first and since upgrading to .732 since the BOLD has the same software and i now have the bold 9650-verizon. When my phone rings the last callers name will come up first then automatically change to current caller.Has this been happening to anyone?
Basically on my LG G4 a grey bar appears when unlocking the screen. It happens every 1 in 5 times.
I go to unlock the screen and on my home screen theres a grey bar that builds up like a "loading bar" only halfway down the screen. (Screenshot below) To get rid of it i have to press the return button and then its gone, I've looked to see if any apps were open but nothing. Done a software reset and done the latest update to 5.1 the other day still happens.
While using my neo v blank screen appears(ocassionally, monthly 3 to 4 times) suddenly, single key wont work at that time need to remove battery again restarting only works fine.
Since last saturday, a black screen appears on my mobile. I have tried to turn off and on several times but nothing. When I turn on, the green led in the power button blinks but the screen keeps black. The battery is full charged and the mobile is updated with the latest updates.
I have a problem with my E5. I shut it down and charge it. When it's fully charged I remove the charger and the charging screen with the small battery in the top right corner doesn't go away. It stays in that screen. Then, when I turn it back on, immediately the password screen appears, without the Nokia/hands logo start screen and I get a notification, something to do with not being able to disable energy save mode. When I shut it down and start it up again, everything is normal. However, the problem with the charging screen is annoying to me.
I have the Nokia 2330c-2,and friends told me that it's the classic one,but that c-2 what's mean?So it's been for a month and 3 days ago I switched it on as usual in the morning,after 3 hours I picked it to see what time is it but noticed that a black circle appeared in the screen,I went from where I purchased it and told me that that is a sign of mishandling,I pressed the screen or hit it,I was disappointed by this as I'm sure that I neither hit it and even didn't pressed the screen.
I have UK unlocked m7 on kit Kat. Recently on occasions when I plug my phone into charger the phone does not charge. Battery appears to be charging on screen but wall charger does not get warm and percentage does not rise. Happens with whatever charger I use. A day or so later phone charges again. Sent phone back to HTC for this and camera issue. Camera sorted but still charging issue.
