When I attempt to use an IP webcam program my Flipside does not default to using the Wifi network it is connected to, to broadcast the video. In order to get it to use the wifi network I have to put the phone in airplane mode and then turn on Wifi. How can I get it to use the Wifi connection without having to go to Airplane mode or otherwise disable my phones ablility to make and receive calls?
View 1 Replies
I admit that I am having the hardest time learning how to use this phone and the user's guide is useless. My phone would not let me to a text today because I have too much stored data. I don't get it. I made about 4 texts since I got the phone and my contact list has about 20 contacts. Clearly something is downloading and saving, but I can't even find out how to delete old texts? I can't tell what application I actually need to be working or on, and there's a ton of them that I can't figure out what they do. I got this phone so I could get on line and google if I needed to, but there's just too much crap available that I can't follow understand. I realize I sound pathetic.
View 1 Replies View RelatedYesterday all of my calendar data disappeared. How do I recover it? I do not sync the phone with anything. I did not clear cache. I did not clear data. The calendar is the one that came with the phone, and is version 7.
View 2 Replies View RelatedAnyway I got my flipside from AT&T this friday and when i turned it on it booted up to the part where it ask me my motoblur account, while im setting that up it just shuts down, restarts and repeats. I've done the factory reset and used RSD lite and still no luck.
View 4 Replies View RelatedI downloaded the MotoHelper_2.0.49_Driver_5.0.0.exe and installed it on my computer. However when I connect the usb cable to the flipside and the computer, neither the computer or the phone will recognize the connection until I shutdown, power off, then power on the phone. Then I only have a couple of seconds to click on the usb notification on the phone before it disappears.
This all started when I started searching for a solution to the low phone storage warnings I was getting all the time. The battery life also bites.
When I try to import contacts into motoblur my phone tells me downloads are disabled. How do I enable downloads?
View 15 Replies View RelatedWhen you are on data and wifi, what service is the default. Is WiFi primary, or is Data primary?
Samsung Galaxy S5 Verizon network
how do I disable data completely avoid data usage and only keep wifi. I have Background Data in Off and wi-fi connected, but I still getting charged for data usage.
View 1 Replies View RelatedI have the 200MB plan and use the internet when I am ONLY on WiFi networks. However, while exploring 2.2, I recall seeing a setting that, if the WiFi connection drops, the new setting stops the Bravo from using the 3G. If the Bravo changed over to 3G to maintain the internet connection (apparently the default setting), massive data charges would be incurred. I have tried to re-discover this setting but no success to date. Any way to use / change this "WiFi to 3G" setting?
View 4 Replies View RelatedMy flipside as i was loading a webpage just went black(while plugged into computer for charging). i hit the power button and nothing happended. So tried plugging into wall outlet and the green light will flicker a few times but will not charge. If i pull the plug out just a slight bit i can keep the green light but phone still does not charge. I have had previous problems of phone randomly discharging with 30 percent battery left. glitch? but the fact that the phone will not even power to charging screen indicates somethign must be wrong. I tried a friends charger of the same phone without any luck. Battery has not indicated any signs of wearing out. It would last as long as the first day i bought the thing. Anyone else had similar problems?
View 4 Replies View RelatedI am trying to install a relatively small application with a size (according to the Market) of 1.3MB. Every time I try to install, it says there is insufficient storage available. I have cleared more than 1.3MB of unused data and storage out to give me a total, according to the settings on my phone, of 15.5MB free space on the phone. My SD card has 1GB of free space. The market still says there is insufficient storage available to install this 1.3MB file. What gives? I've cleared more data out than that and it still won't install. I went from 9MB free space on the phone to 15. How is there not enough space? I've even turned the phone off and restarted trying to reset the RAM to no avail
View 8 Replies View RelatedSo my phone started acting badly, constantly apps crashing and needed to be forced closed. After several reboots I finally got to the settings and realized the phone was completely out of space (0.00 MB free). I found no cache in any applications, and started to delete data as much as I could, uninstalled Dolphin, etc., and after several reboots it still had no free space.So ... factory reset ... and disaster.The phone came back, but would only display the setup wizard, click done, re-display the setup wizard (perpetual loop). Eventually I did the hardware reset method, but got the same result. So I tried re-installing the latest update ROM.hat really should have worked. But it started installing it and fails with (Status 2) - whatever that means.I've managed to get around the perpetual-loop wizard, but I think it has no home application. I get a bar at the top that I can flick down, but no screen, no menu, no way to actually work the phone. I think if I could get something reinstalled on it it might work, but there doesn't seem to be a way to do that.
View 2 Replies View RelatedGot a Flipside that is supposed to be unlocked. How can you tell if it is unlocked or not?
View 2 Replies View Relatedmy brand-new flipside occasionally won't load the menu. i press the button to load it and the screen just goes black with only the white notifications bar at the top, as though it is going to load but never does. if i press the sleep button and leave it alone for awhile the problem usually goes away, but this can get to be quite a problem, as i can't set alarms or use my gps, etc
View 4 Replies View RelatedMy Xoom post upgrade to 4G is now assigning the IP address of 192.168.20.1 to the device usb1 everytime it is rebooted. This apparently hardwired configuration conflicts with my homenetwork's default gateway.Is there anyway to change this with out rooting the device? I would rather not have to re-IP my home network or not be able to connect to any network via Wifi who uses that IP address as a default gateway.
View 15 Replies View RelatedI bought this phone about three weeks ago from the AT&T store and purchased the proscribed "AT&T Zero" spare micro-usb charger that even Motorola sells on this very website as an accessory for the Flipside. I plugged the phone into my spare charger at work and discovered that I couldn't answer calls, could not navigate the screens without either looping behavior or the wrong "buttons" being pushed as I tapped the screen. As soon as I took the phone off of the charger, the behavior settled down. I took the phone and charger back to the store and demonstrated the same behavior to the salesclerk. He offered to replace the cable and/or charger and I insisted that we try the equipment first. The same behavior was exhibited with the new charger and cable, but, when he put the phone on his own charger (a Motorola branded charger), the phone worked fine. At home, as an experiment, we put my phone on my husband's Motorola BlueTooth charger, and that seemed to work as well.
My problem is, I cannot find a spare charger that will work on this phone. I am told that Motorola does not sell the branded charger separately. While the Rocketfish charger claims to be compatible, when tried in the store, the phone would not recognize the charger at all, or only intermittently. (I did notice on this board a tip about the cable being wire-tied perhaps being the cause of someone's problem - something to consider) I am left with two options, either carrying the charger around with me and purchasing the Motorola car charger for car trips, or buying a Motorola BlueTooth that I don't need just for its micro-usb charger.
My boyfriend has had his Flipside for almost a year now. He has an ongoing issue getting the screen to unlock for incoming calls. Sometimes it works, sometimes it doesn't. He does not have any apps installed and, since the problem is intermittant, it's hard to figure out why the unlock slide doesn't work. I'd like for him to be able to unlock it with a different method, maybe by using the slide out keyboard. Any fixes/tips for this? It doesn't seem to be related to having water or grease on the screen
View 1 Replies View RelatedI upgraded my flipside with 2.2 and I initially had 60mb of internal memory left.
The 2.2 upgrade also came with the adobe flash 10.1 player. It cannot be moved to the sd card. Since then I have installed iheart radio and a market and a map update was installed. Now I have about 36mb left.
How many mb's do you have left after upgrading to 2.2?
Do you think this upgrade is going to be workable with the phone or will we just not be able to download a bunch of apps?
I used to be one of the $UCKER$ loyal customers who upgraded my phone acocunt to a BackFlip last July 2010. I hated it, and now they do not even stock it. Well, I lost the phone so they sent me a replacement since my BackFlip was something I was paying for the Warranty on. So like, I got myself a brand new FLIPSIDE in the mail to replace my lost phone! I wasn't sure what to think, since everyone in the AT&T store told me to ask for something comparable, but NOT ANOTHER MOTOROLA (although the Atrix looked sort of neat, being a 4G phone and all,Anyway, I got the phone and logged on with one of two MotoBlur accounts I have. I forget if it is the newer one or the older one, but either way, it seems that so far, this phone is much better than the BackFlip.
However, so far, each time I go into ACCOUNTS and try to add either my Facebook or my Twitter account, it fails every time, after sitting there saying "Adding Your Facebook Account..." for a very long time, the bar slightly moving. But then it fails. Epic Fail.So I can download the Apps off of Market and run Facebook and Twitter that way, and get my updates like that, but my AT&T Social Networking App is useless (off of Market), or the Updates app or the Happenings app that both come with the phone. Both are useless. All three are useless. I don't know why on Market if you go to ATT's site, they have a new Social Networking app, but I can't use it without adding the Facebook or Twitter accounts in the Account section of the phone, which it still fails to let me do.I have the phone set up and running nicely, and there have been no issues so far, except that it keeps running out of space on the tiny little MICRO SD card that came with the phone 2 GB. I assume that is the same with the BackFlip? But I NEVER ran out of space on the BackFlip. maybe I upgraded my SD card or something and just blanked on it, but I doubt it. But anyway, I have gotten all the major issues I had with the BackFlip solved with this phone, even though it certainly is not a great phone. I am thinking maybe I should just factory reset the phone and start over wtih a brand new MotoBlur account and see if that fixes it.... but I don't want to lose all my phone numbers. So I guess I need to know:
Is adding Social Networking accounts to the Accounts menu in the phone an issue with this phone? And if I had to waste all the time I put into this phone to do such a stupid thing, how would I backup all these phones and apps I do like? I love how the Live Wallpapers works on this phone over the BackFlip. But I also hate how the AT&T store I saw this phone at to report the phone lost or stolen (and was told I couldn't order a replacement there at the store, but call them on another phone.... I don't own another phone, not even a land line this IS my lifeline so I had my parents do it, wheeeee anyway, I have once lost the phone and had it replaced by going to the big new store in San Francisco, so this is a refurbished replacement phone, and I noticed even with another Motoblur account, it DID NOT FIX THE ACCOUNTS ISSUE -- so both my MotoBlur accounts have this issue) - the AT&T store doesn't STOCK this phone even anymore! That's how fast this stupid line of phones seems to have gone down the drain in about a year. Wow. And I started the "ADD ACCOUNT" for FACEBOOK in my ACCOUNTS section of the phone when I began typing up this forum message.Still shows the bar SLOWLY moving to the right but I am sure it will fail when it eventually gets tired. It does this every time. I just UNINSTALLED the FACEBOOK and TWITTER APPS that I got off of MARKET..Wow I got to format this entire message and it STILL IS TRYING TO ADD MY FACEBOOK ACCOUNT TO THE ACCOUNTS SECTION OF MY PHONE!! I am on WI-FI AS I DO THIS TOO. Oh yeah I guess that is IMPORTANT, TOO. I am using Wi-Fi as I do this, so I am not having any connectivity issues. Everything else works fine connective-wise. So how could my Apps work for the social networking but not the social networking accounts that are supposed to be built in features to this line of social connectivity phones??
what to do when u cant sign in to your blur account when it says temp.out of service
View 3 Replies View Relatedhow to make my Flipside install apps that the market says is incompatible but really are? My bank just put out an app and the market says it is incompatible. I also have an Alabama EMS app that the market says is incompatible, but I got the developer to send me the .apk and it installed and worked like a champ!
View 5 Replies View RelatedMy 3-month-old Flipside loads text messages and my contacts very slowly, to the point where it can take in excess of five minutes to create and send a text. I know the problem isn't too many texts in my inbox, since I delete them frequently & usually only have one or two brief conversations in them. When I start typing a contact's name in the sender box, my phone doesn't automatically search my contacts for autocomplete (or does so very slowly), even if I hit the OK button, which has occasionally sped up the process. Therefore, I have to go through my contacts manually & send the message from there. But this is still a problem, since my phone loads my contacts slowly, also. I do have a lot of contacts, probably around 800, because my phone is synced to my Facebook & Twitter accounts. However, I can't un-sync them because then I can't have Facebook or Twitter on my phone--there's no way to have site access without syncing my address book. This is getting to be very frustrating & super inconvenient.
View 4 Replies View RelatedI have purchased a Sandisk 16 gb sd card from an AT&T store for my Flipside. After a few days it does not recognise it.
View 1 Replies View RelatedI just received a replacement refurbished flipside that came with a micro SD Card that was NOT already pre-installed in the phone. When I went to try to put it in, it doesn't fit right! It seems to be too small and moves around too much in the slot. Am I just doing something wrong? How is it supposed to fit in that slot? There is a little rubber tap that says "Lift Here" -- I do that and put the micro SD Card in the slot, but the card is just to small!
View 2 Replies View RelatedTrying to get Yahoo! Mail, Facebook for Android---Won't Connect Download from Google Servers. I went to the yahoo web address, then it prompted to sign in to my Google account and it never connects to Google servers and tells me "there is no network connection" but I am connected to the wireless server...I verified it on my phone and obvious surfed the internet. What gives? Any suggestion?
View 1 Replies View RelatedWe got a Flipside for my husband in April, 2011. Since then we have had to do 3 hard resets and he still can't send or receive text messages due to low internal memory. Today, it can no longer connect to the internet. I connected the phone to the computer to try to troubleshoot it and that doesn't work. I really want to throw it out the window! We have always owned Nokia phones and never had this problem. We got the Flipside when his Backflip started acting up, The next day - the Backflip started working.
View 5 Replies View RelatedWhen I view my contacts and pull up the menu to choose settings. I go to choose AT&T Address Book - You can change your address book settings. When I choose it I get the error : The application Contacts (process com.motorola.blur.contacts) has stopped unexpectedly. Please try again. The only thing odd I can find is that com.motorola.settings.anr.
View 4 Replies View RelatedHow do you shut off data and use wifi only on Electrify?
View 2 Replies View RelatedI was just curious to know if this is considered a known bug / will be fixed in the gingerbread update.After using wifi and walking out of the wifi zone (eg, out of my house and down the street) I will check my phone to find that the mobile data connection has not re-started itself, and only a reboot will fix this issue. Other issues have been my phone will get stuck only being able to upload (and not download the resulting pages/data) as well as the symbol disappearing completelyafter a little bit of research I found this may be a problem with 2.2.2 froyo and for my sake I hope it is, but I was just curious to make sure it is fixed in future updates.
View 3 Replies View RelatedJust picked up my RAZR. Only issue so far is the WiFi. The phone will connect to my home network but any attempt to use the browser gives a connection error. Same issue with any application that requires a data connection. My laptop connects with no issue and my Droid X connects with no problem.
View 15 Replies View RelatedWill the USB port supply 5V to a connected accessory? I'm thinking of running a MIfi 3.5G mini-router off it in the car.No data connection through USB (that will be wifi) just power.
View 4 Replies View Related
