Just recently my Defy refuses to recharge using the mains socket charger connected to the usb cable.It charges perfectly well through the computer and also through my car socket..........what am I missing?
View 1 RepliesMy laptop doesn't recognise my DEFY via USB.More details: When I got the phone it worked but after a while not always. Sometimes it connected 5 minutes later but nowadays doesn't work at all.By power charger it is charging normally.When it's plugged to the computer, the phone's screen lights up, but doesn't connect or charge. If I tick on/off meanwhile the USB debug, the USB sign shows up but it's still not charging or connecting. (I've already tried all 4 options)Moreover when I remove the USB cable, the USB signal doesn't disappear until I restart the phone or abort the USB in the application manager.I've already tried to install or uninstall the driver (Moto Helper) but didn't help.The main problem is that if I connect the phone to the notebook, the device manager doesn't see it. (I tried different computers, Win XP and Win 7)I did a factory reset several times, I also tried changing usb cable... but nothing happened.
View 1 Replies View RelatedI ordered an extended life battery for my Defy, 3500mah battery that came with a new battery cover. after I installed it, I noticed that every time I connect the usb cable, the phone reboots! I tried connecting the phone first instead of having the charger pluged into the wall and still, it reboots every time! if I leave it connected and let it reboot, it will power up again and go on to charge. also the usb still works to connect with my pc, but again I have to wait till it reboots!
View 1 Replies View RelatedMy battery went low but my charger didn't show as connected. Now the battery is flat and when I plug a charger in I get a wghite light. Tried other charger to no avail. Need my phone.
View 2 Replies View RelatedI had been using my N900 for 2 weeks without any issues. I never updated the software. Last night I was trying to take a picture and opened the camera lens cover. Accidentally I pressed the power button instead of the camera capture key while trying to take the picture. The display went off. I also found the phone felt warmer than usual. I took the battery out, put it in and tried again. No success. This time the phone did seem to be getting hot. I took the battery out and tried several hours later. No effect - the phone wasn't feeling warm either. I tried both the USB and wall charger - the LED was glowing green, but the phone wouldn't turn on.
Now even with the charger connected, the LED doesn't glow. Being a Sunday, I can't contact Nokia Care till tomorrow. Breaks my heart to think the hardware could get messed up so easily. We've had several Nokias in the family but not a high end one like N900. I've tried everything suggested in other forurms (including Maemo). I tried to update software with NSU. The NSU can't even detect the N900 when I connect it to the USB port. Probably suggests the battery is flat. I don't have a 5800 to try and recharge the battery externally - its shocking to know the phone can't charge if the battery is flat. If a laptop can why can't a "smart" phone? Anything else I can try?
1st question - Is there any problem if i unplug iPhone 4 charger first, instead of the cable connected to the mobile phone, after the charge is completed?
2nd question - Is it advisable to do a hard reset once a week, in order to mantain phone/battery at their high capacity?
Info:
iPhone 4, iOS 5.1.1
When I put my Atrix in my HD dock and the dock is powered on, the Atrix automatically brings up the widget clock in landscape. When the dock is powered off, nothing happens (screen stays off). Is there a way to start the widget clock mode manually -- I do not want to leave the Atrix charging all the time. I notice that there is an app to start the car dock view. Is there one to start the landscape clock widget? The Atrix is up to date running 2.3.4.
View 3 Replies View RelatedI have a Blackberry Torch which has been fantastic.Brought December 2011.I plugged the phone in to charge last night as usual and this morning when unplugging the phone the enitre socket came out of the phone and is now attached to the end of the charger. I phoned Carphone warehouse for advise about the repair of the phone under the warranty and was told the charger socket is not covered under the Blackberry Manufacturers warranty and any problems with the socket are down to wear and tear, which I would have to pay £160 or more to have it repaired.I can not find any warranty information on the internet. Please can you advise if this is the case.The phone is only under a year old and I have never mistreated the phone charger socket therefore I do not understand how such an issue could occur, unless there is a fault with the phone? I also have a blackberry curve for work and had no problems with the charger socket.
View 1 Replies View RelatedI have had a 9860 Torch for 15 months with Orange now, with no problems to mention. The phone however started to play up, the battery seem to run dry very quickly and I had to put it on charge daily without having used the phone much, ie no bluetooth, not surfing the net etc. Then the phone started to go off when I took it off charge. The screen would go black and only the butons at the bottom would be alight. Nothing would happen if I pressed any of the buttons, and I am not able to restart the phone. I then have to put it on charge again, take the battery out and re-insert it, and it will start up again as long as it is connected to the mains. The battery indicator shows the battery is fully charged, I did however buy a new battery and downloaded the latest update just before Christmas, which seemed to solve the problem for a few days, however the phone has now reverted to the same problem. The phone works perfectly well when connected to the mains, but the screen goes black as soon as it is disconnected, and will only start up again if connected back up to the mains and battery taken out and re-inserted.
View 3 Replies View RelatedMy IPhone 4 has gone dead suddenly. it was fine durng the day up to 5 mins before it went dead. It does not even charge by the cable which works with the IPad. What must I do?
Info:
iPhone 4
In the user guide for the Droid RAZR dock (part # 89525N ), there is a split audio/charger usb cable. This cable also shows in several catalog photos for the car dock.I purchased the car dock from a Verizon (official) store, but only got a straight audio cable. what the part number for this cable is, and (b) where can I order it?
View 9 Replies View RelatedI just go an HD dock for my Droid RAZR but most of the options will not show up. Do you have to use an HDMI cable to make all of these work? Or can use a USB cable connected to a computer also?
View 4 Replies View Relatedis it possible to turn off the sound that the defy makes when connecting a usb cable?
View 2 Replies View RelatedI have connected the phone with Wifi, the system shows it is connected, the wifi bars show strength as very high. Yet unable to connect tointernet/email/facebook/apps shops etc through the wifi.I have checke dthe mac addresses - they are the same. no restictions from the router side.
I am at a loss.
Is there any way to have the Droid turbo make a beep when you plug in a charger or sitting on top of the Qi charger like the old Samsung note 2 did? Reason I ask is because I would like to know when it's actually charger without having to look at the device. I have a tytl qi charger and it lights up but I picked up a powerbot for work and would like it to beep when it starts to charge or when it gets interrupted.
View 3 Replies View RelatedConnected Player replaced by TuneWiki?
View 4 Replies View RelatedI want the display to stay on while connected to my 12VDC charger while in the car. I don't have an official Moto car dock. I have tried using Smart Actions but the only options seem to be changing the screen timeout option to a maximum of staying on for 10 minutes. I've tired many variations using Tasker and still no joy.
View 5 Replies View RelatedMy original Droid had an option to make the display remain on (and phone unlocked) when connected to the charger - a real convenience when using the phone on the car. I cannot find this choice on the Droid 3 nor could Verizon tech support.
View 2 Replies View RelatedI have a CK-100 car kit and trying to find a replacement/upgrade charge cable (CA-134) with a USB micro B connector instead of the 2mm that is fitted. The user/installation guide mentions that an alternative USB cable may be supplied but all searches have failed to find one. The alternative is to make up a cable RJ45 at the CK end, I can buzz it out but does anyone have the pin out for the RJ45? I've tried the CA-146 adapter and to be honest it's naff - it runs hot and the output is reduced to the point that whilst running my satnav app the phone will discharge faster than it can be charged, I've also tried the adapter on a standard car charger with the same results.
View 7 Replies View RelatedI bought the iPad (which I am loving btw!) on launch day but was a little upset when the cable was different than the one I had been using for my iPod touch for years. A couple of accessories kind of just went down the toilet. So I did a little searching and couldn't find anything, but do you guys have any idea which cable the new iPhone will use? It would be very convenient for me if it used the iPad cable as that would give me a second one without having to go out and buy it separately.
View 9 Replies View RelatedI've had a 9300 curve since august and love the phone. However recently I've been noticing a problem with the charger in which I've had to wiggle it around to make the phone charge. However I tried it with the USB cablbe before and the USB slotted in fine and did not seem loose at all. I guess it's the charger that's broke? Perhaps the cable is loose or torn inside or something?Should I just get a new charger?
View 1 Replies View RelatedI have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.
Info:
iPhone 3GS (8GB), iOS 5.1
I am using the official charger that came with my iphone 5. one it doest charge just shows the "this cable or accessory is not certified......" i used another cable and it works just fine. but i when i use the official charger that came with it doesn't charge. just the same error.
Info:
iPhone 5
I have an N97 on Vodafone in the UK. I upgraded the firmware to version 2.0 and now want to upgrade to ver 2.1..The update seems to work OK, but when the phone is rebooted, even after a hard reset, it still shows version 2.0..Also it will not allow any additional application such as Ovi mpas or google maps to install.
View 5 Replies View RelatedSo what might be the problem, when trying start my phone, without usb cable, it goes on, but after 30 sec or so my phone try reboot itself and this loop continues over and over again.
Only way to start the phone that it will stay on, is using usb-cable connected to pc. When doing so, it start normally without crashing everytime. There is also problem with camera and flash. Both things don't work. Flash not even try start but when pushing the camera solution, it will try to start, but after a second it crashes.
Judging from the symptoms I think that there my might be some problem with starting procedures when phone is turned on. The phone maybe trying to check something like camera or flash and crashes doing so. But why this not happen when I have connected my phone with usb to pc? Why this way I can start my phone normally and start using it. I just have avoid to shut it again!
BB bold 9870 battery went flat. As I have mislaid the Ac charger unit, I connected my BB to my laptop via a USB connecter. Now my BB will not charge at all, and when I go to the BB desktop software icon, it says it is 'disconnected, although the cable is connected! What/where can I go to get my BB working again
View 1 Replies View RelatedMy Razr constantly detects a HDMI cable connection, even though there is no HDMI cable near it (not even a USB cable is connected). A popup keeps showing up asking me to "Select Dock Type". This has been really annoying, as I need to dismiss it every time it shows up. I can't find a way to disable the detection of the HDMI cable.
This problem started after 2 weeks into owning the phone, back in mid December. I called Verizon technical support. They thought it was a hardware defect, and sent me a replacement phone. However, when I received the phone, I found that it was a refurbished phone with a big scratch on the side. I returned it and kept my original one.
Other than this problem, everything runs great, and I love my Razr. My question is: has anyone seen this problem? I have learned to deal with it by dismissing the popup every time I unlock the screen. Can a future software update include a setting where I can disable the HDMI detection?
My E72 is not vibrating as long as it is connected to a charger (normal or micro USB).I could not find a setting for this behaviour. Is this supposed to be a feature?I think I also observed that the vibrating is gone when the battery is very low. It then does not return until the battery is fully charged again.
E72-1, 0586718, firmware 022.007 (latest)
E72-1, product code 0586718, firmware 022.007
iPhone 5 won't turn on with or without charger connected. I tryed to recharge for allnight but nothing happens! Its iOS 7.1.2.Also, i tryed with (HOME+POWER BUTTON)Â &Â (SILENT+HOME+POWER) !Â
Info:
iPhone 5, iOS 7.1.2
I have recently upgraded from a 9650 to a 9930. Everything is fine except that when I have the device locked (via the new, inconveniently placed lock button) and plug in a power cable the phone unlocks. How do I disable this? Maybe I am the only one who is annoyed by this but what is the point of a button that locks the phone until you unlock it if other things can unlock it. It wouldn't be a problem if not for the touchscreen which I always seem to be pressing at the time I plug it in.
View 1 Replies View RelatedI have the BB Pearl 8120 set. I could not transfer files via usb cable connected to my laptop. I have already installed the black berry desktop software. when i go to Media Manager, it shows the folders of documents, pictures, videos etc saved on my handset but when i double click the folder to view its contents, the software does not work. As guided by black berry helpline rep. I switched on the Media card support, Mass storage and selected 'Prompt' in the Auto enable Mass Storage media on my handset. can u guide me how I can transfer files from my handset to my laptop.
View 1 Replies View Related