Motorola Bravo :: Can't Connect To Home Wifi
Aug 24, 2012When I select my home wifi, it says authenticating...disabled. What do I do? The wifi works for all other devices in the home - laptops, printer, etc.
View 2 RepliesWhen I select my home wifi, it says authenticating...disabled. What do I do? The wifi works for all other devices in the home - laptops, printer, etc.
View 2 Replieshome wifi losing internet connection, while phone tells me wifi is working.
this has been a problem since i've had this phone, but i assumed it was the source i was watching (Internet, netflix, etc), but eventually narrowed it down to my phone, or possibly router, are loosing the interent connection, despite the wifi symbol still in the notification bar.
toggling wifi off then on again will fix the problem most of the time, but usually only for a few minutes. i'm usually able to access the interent on my phone at first, but after a minute or two (or sometimes much longer) the interent drops again.
restarting doesn't change anything (on either my phone, or the router, or both). i have a new-ish netgear router (~1 year old), and i have no problems with any other wifi device that use the home router (including a roku, and another android phone).
When I got my Atrix 2 days ago, I brought it home and connected to my home wifi with no problem. Downoaded the 1st of 2 updates/upgrades and after installing it, I was no longer able to connect to it. "Obtaining IP address" was all it displayed until disabling it and connecting to one of my neighbour's unsecured, poor signal, on and off connection.I've tried the tech people at Bell Mobiity and even my internet provider and they are clueless.Everything else in the house connects without issue, including my old blackberry bold 9000, xbox, 3 laptops, tv, etc. Just not my Atrix.I've rebooted the router several times, renewed WAN settings, switched to static ip. I've also pulled the battery for 2+ minutes, rebooted the phone, told it to forget, then re-entered the password to try to reconnect. Nothing.I also don't have any issue connecting to other wifi networks. Just the one in my house.
View 1 Replies View Relatedmy droid X2 will not connect to my home Wifi network. I have to reboot my router to get it to connect. It tries to connect but displays a message that it is "Getting an IP address" but never connects without a router reboot. This is a big pain.
View 1 Replies View RelatedJust recently my pc began having a problem recognizing my Bravo as a phone. Until then everything was fine.Now when I plug my Bravo into a USB port, I hear a chime, but no window opens.When I go to My Computer, the phone is shown as Removeable Disk (X:).When I double click on it, a small window opens with this message: "Insert Disk.Please insert a disk into drive X:." Under properties, it appears as Motorola MB520 USB Device, a disk drive.After plenty of research, I have tried changing the assigned letter of the drive twice.Every other USB device I own works just fine on my PC. The only way I can access the phone on my PC is to turn off the pc, connect the phone, power on the pc, and then the phone appears as a phone. When I connect the phone to another pc, the phone appears as it should.Some research shows this problem may be related to Acronis on my pc, but another pc with Acronis on it can recognize my phone. Could this be the result of disconnecting the phone without "preparing" the disconnect?
View 5 Replies View RelatedI have the 200MB plan and use the internet when I am ONLY on WiFi networks. However, while exploring 2.2, I recall seeing a setting that, if the WiFi connection drops, the new setting stops the Bravo from using the 3G. If the Bravo changed over to 3G to maintain the internet connection (apparently the default setting), massive data charges would be incurred. I have tried to re-discover this setting but no success to date. Any way to use / change this "WiFi to 3G" setting?
View 4 Replies View RelatedJust recently my Wifi has stopped working correctly anywhere except for at home. The phone shows an active Wifi connection, but I can't get anywhere. It still works fine on my home Wifi. I have not made any changes to the settings and it is still set to use DHCP to get a dynamic IP assignment. I have tried having the phone 'forget' a network and relearn it
View 5 Replies View RelatedI just updated via bravo . once it reset and installed update. it reloads and wifi is off. I re connect to prior connection and it scans then disconnects. I need the wifi because ATT will charge you your first born for data usage. MOTO current Android version says 2.2.1. I dont want to be violated.
View 4 Replies View Relatedsetting up a Bravo MB520 to work correctly with Consumer Cellular Service. Which fields have to be set up to make the Data work? Is there a good guide to explain all the software in setup for instance? Or how do I get an unlock code to get the phone away from other networks?
View 1 Replies View RelatedI have been traveling a lot recently and taking advantage of using the airport lounges to relax before boarding my flights. The Admirals Club (American Airlines), the Red Carpet Club (United Airlines), the Chairman's Club (US Airways) often offer complimentary wifi access, usually via T-Mobile. Typically what you do is navigate to a web page co-branded with the airline's logo and click on "Wifi access" or a similar link.The problem is that the T-Mobile hotspot categorizes the Bravo as a phone, not a PC browser, and never takes you to the specific page for that airport lounge; I kept getting sent to a page where I was supposed to log in with a T-Mobile username. I finally gave up and called T-Mobile hotspot support who pointed me in the right direction even though they don't sell the Bravo.
Open your Bravo's stock browser.Enter about:debug in URL field and press Go. No visible feedback is given after the command is entered. Select Menu --> More --> Settings. At the bottom of the Settings list you should see 9 items in a section called Debug.Select the UAString item and choose Desktop.Press the back arrow to return to the browser. You should now be able to access the URL that gives you the lounge wifi access. You can set the UAString back to Android once you're connected to the wifi, I found.
I can't get my Bravo to work with an FM transmitter. I have tried several transmitters and all I get is silence.
View 8 Replies View RelatedI'm not getting my hopes up, given the short life of the Bravo, but the Atrix just got upgraded to Gingerbread (Android 2.3.4)/Blur_Version.4.5.91.
View 2 Replies View RelatedAfter I updated the software, my phone will randomly restart itself. It will go to a black screen, then reboot on its own. I have tried two refurb phones from ATT and a new battery, and it still does it. I even got a new SD card, thinking that maybe it was a memory issue. Still restarting.Is there a solution (besides just buying a new phone)?
View 5 Replies View RelatedDid the update and now my iphone 4s wifi does not connect to my home wifi. It just sits there with the little circle going round and round. My ipad3 updated and works fine...
Info:
iPhone 4S
I just purchased my 9700 and have porblems connecting to my wifi. I ve tried th WPS setup both with the pin method and push button setup.
View 5 Replies View RelatedI can't connect to my WIFI at home, I have been doing it for months now but all of a sudden there is a red star above the WIFI logo on the top right and something keeps coming up about hotspot login but can't figure it out
View 1 Replies View Relatedi used to be able to connect to my home wifi and download apps from bb appworld. then i travelled from the philippines to my work base in the bahamas. then i couldn't go to appworld but still able to open my facdebook and Internet. just today i couldn't connect to my wifi (it's working fine), even if i enter the password. i wonder what happened?!!!
View 4 Replies View RelatedI've typed in the correct password for my network, but when I click connect, the wifi status says 'connecting' then 'disconnected'. I have tried using Satic IP and also adding a wifi network, but they don't seem to make a difference!
View 6 Replies View Relatedi am having trouble connecting to my home wifi,
my computer and tbax are connected and i know the password my phone says cannot join network.
Info:
iPhone 4, iOS 5.1
Up until recently I've had no issues with my iPhone 4, however, as of late, the phone can't detect my home WiFi network. I have several other devices that can find and connect to the network without issue, and have power cycled the router to be sure. the issue is most definately with the phone itself. iPhone has no issues connecting with public WiFi networks at McDonalds, Starbucks, nor the Airport. As far as iPhone is concerned, there is no WiFi networks to connect to in my home. I can't remember if this issue began before or after I installed 5.1 on my phone. I'd like to try all avenues before fully resetting the phone, as I have alot of data, settings and un-backed-up photographs, documents, etc. I'd rather not risk losing. So far, I have reset the phone (Hold Home and Power until phone resets.), Reset network settings, turned the phone on and off both with WiFi turned on and off to no avail. For the record, I have searched out and read alot of threads on this issue, and tried many if not all of the suggestions contained therein. Most of these issues pertain to iPhone not detecting ANY networks, or detecting but not connecting.
Info:
iPhone 4, iOS 5.1
All of a sudden I cannot connect to my home wifi, nor home wifi at my daughters house. It finds the connection right away, but after putting in the password, I immediately get a message "unable to connect to ......" I have tried connecting to free wifis at public places and it connects fine. The password on mine has not been changed, nor has my daughters?
Info:
iPhone 3G, iOS 4.2
After having my iphone4 for over a year, it all of a sudden stopped connecting to my home wifi.
Info:iPhone 4, iOS 5.1
All of a sudden my IPhone 4s will not connect to my home wifi. My IPad and MacBook Pro are connected.
View 6 Replies View RelatedI bought an iphone 4s yesterday, and last night I connected to wifi at a friend's house. This morning, when I tried to connect it to my home wifi, it wouldn't work. I've tried changing the wifi setting in my phone, and turning my router on and off, and resetting the wifi settings in the phone.
Info:
iPhone 4S, iOS 5.1
I have a D-Link DIR-825 Xtreme N Dual Band Gigabit Router connected to my Telus high speed modem at home. The router has been set up for WPA-2 security with a 63-character passphrase. A 17" Macbook Pro (2010) (built-in Airport) and a homebuilt PC (2011) running Windows 7 (D-Link DWA-160 Xtreme N Dual Band USB Adaptor) are able to connect to the router. I have copied the same passphrase to the Notes section of my iPhone 4S and then tried to connect to the network. Passphrase is correct. Connection times out and says it was not able to connect.
Info:
iPhone 4S, iOS 5.1
I cannot get my iphone to connect to my home wifi, but it will connect to other wifi services. What settings should it be on?
Info:
iPhone 4S, iOS 5.1
Ive tried all the steps they give you on here... its my first iphone and im alredy so disapointed that im having this much trouble my old ipod touch conects not problem what with my new iphone..
Info:
iPhone 4S, iOS 5.1
My iphone cannot connect home's wifi
Info:
iPhone 4S, iOS 5.1.1
I've tried everything. My Mac Book, iPad and Apple TV are all connecting fine as well as my room mates iPhone!
Info:
iPhone 4S, iOS 5.1.1
I have tried both turning on and off the wifi on the phone. I have done the forget this network and reinput the wep password, I have reset the router 3 times. I am sitting next to the router and my macbook pro ( which is connecting with no problem) I have input the wep password perfectly.
View 1 Replies View RelatedMy iPhone will not connect to my home wifi. My iPad is connected and my husbands phone is connected. My cell phone gives me the error message it is unable to locate my wifi address. Do I have an incorrect setting? How do I connect?
View 5 Replies View Related