The remote on the earbuds isn't working, I cleaned the jack out and no lint was there, I'm thinking it's a hardware issue? If i turn the plug, then it works sometimes.
I'm having problems with getting my remote control on my iPhone 3GS to work. I've tried out the headphones out on different iPhones and they work so it's not the headphone itself. I've had this problem for around 6+ months now I attempted the trick where you get a paper clip and get all the fluff out of the jack however it came to no avail. What is left for me to do? Is it a problem with my audio jack flex cable?
I have an HTC One M9 and a pair of HTC headphones which should allow me to skip back and forward between music tracks.
However, this function does not work and pressing the skip forward or back buttons only turns the volume up or down. I have actually tried several different brands of headphones and experienced the same issue.
I have a very oldCK-200, which had 1.21 SW, and I updated it yesterday to 4.0 ... remote no longer works, and I did try the ignition off/remove control head/power on with switch after 30 seconds...
my remote control has stopped working. it was working well at the beginning but after some days of non-using it, it does not want to work anymore.i tried to take out the battery but didn't work, i double checked whether the Bluetooth was on but it didn't make a difference.
Headphones with remote - the remote controls don't work. Dr. Dre Beats earbuds that say "designed for Android" - mic/headphones work, play/pause and volume buttons do not
I have a new 8350i and downloaded the new 5.0.0.807 (?) version software. For some reason, after doing this, the ability of my Plantronics Voyager 815 headset to perform remote controls (answer, hang up, volume, etc) has quit working. Has anyone else had this happen to them?
since the Upgrade to firmware 53.001 (053.001.237.03, dated 29th Nov 2010/06th Jan 2011) on my E52 (E52-1, RM-469), none of my remote drives work any more.
I tried looking up videos before coming onto here. Everytime I go to "add library" in the remote app, it gives me a passcode like normal. Then I god to iTunes and I'm stuck there.
I would like to know if there is a way to use my iPhone as a remote microphone in conjunction with apple tv and associated conected display and audio system.
Is there anything like VLC (or logmein.com, etc) for an iPhone which will let me control the iPhone remotely, either from a computer or another iPhone?Recently my wife's phone went missing. We can see it in Find iPhone.But, we would like to get a sense of what is going on with it. Whoever found has it on and is not responding to messages we are sending to it
I have not been able to get the remote app to work ever since upgrading to iTunes 10. It appears that iTunes 10 breaks the app as some other people on the Apple forums are experiencing the same problem. And just to be sure I completely disabled my firewall.
My 3GS was stolen this morning so I set up a Remote Wipe using Find My iPhone. Turns out a neighborhood kid stole it and, luckily, his parents brought it back to me. As soon as I turned it on, the Remote Wipe started. Now, it's stuck on the Apple logo and isn't responding (won't reboot, iTunes doesn't see it, won't go into DFU mode). The Remote Wipe didn't complete.I am *NOT* a thief! This really happened. I have a good reputation on a couple other forums where I post more often and I can post a photo of my purchase receipt from June 2009 if someone tells me how. don't have Edge or 3G data service. I use my 3GS over Wifi. I thought this might be the problem, but the instructions to start remote wipe came to the phone over Wifi, so it should be able to continue over wifi.
Q: Has anyone experienced this type or problem or heard about it? Q: Any ideas on how to fix this problem?
PHONE INFOS: 3GS, 3.0.1, jb with RedSn0w, not unlocked WHAT HAPPENED - remote wipe initiated - screen went black - Apple logo appeared - empty white progress bar box appeared under Apple logo, but no progress bar started or went accross it - white progress bar box disappeared - spin wheel appeared superimposed over Apple logo, but did not spin
CURRENT STATUS - for the past 4 hours, the steps above keep repeating, minus the empty progress box - every few minutes it starts over again with the black screen - 3 seconds later, the Apple logo pops up - about a minute later the spin wheel shows up on top of the Apple logo and doesn't spin - after a while the screen flashes black again and this process repeats
I have a 3Gs J.broken, Locked running on 3.1.2 custom firmware, 05.11.07. I use the Remote App a lot on my iPhone, it was working fine last week, but this week so far nothing.I reseted/deleted the Library connection that wasn't connecting, tried to set up a new one, I have absolutely no response from iTunes, my PC and the iphone both share the same wireless WiFi channel, I don't understand
My girlfriend thought her iPhone was stolen today, so she did a remote wipe so no one could steal her information off her phone. It ended up that she had just left her iPhone someplace and was able to get it back. Now that she's got the phone back, she's trying to restore it, but it looks like the iPhone was set to back up to iCloud, but never did because of an error (she had no idea she was getting), and it seems that since it was set up to back up to iCloud, the last iTunes backup was from before she got her iPhone 4s (so it's 5 months old). Is there anyway to pull information off of an iPhone after it's been remote wiped? I have a program for pulling information off of digital camera memory cards that have been formatted. Is there something like this for iPhones?
Got my iPhone stolen. The person turned it off right away. So far it has been offline. I have been sending messages and locking commends through iCloud.com, but have not chosen the remote wipe option yet.
Is it possible for a stolen iPhone be identified after restore? An iPhone has a series number, I assume iTunes would be able to identify this number somehow. Can anything be done on this front?
My iphone was stolen and i put a lock on it from find my iphone, now that i got it back its says IPHONE IS DISABLED CONNECT TO ITUNES. When i connect it to itunes it says it cant access it because the iphone is locked with a passcode. There is no option to enter a passcode.
I lost my iPhone today while playing soccer. I used iCloud to remotely lock the iPhone and since my device is offline right now. As soon as I put on the lock, I realized that if the person who found my iPhone finds it locked, would they be able to connect to the internet? If they can't, could I remove the remote lock so it can connect to wifi manually and let iCloud track it? Also, my phone is under the AT&T carrier in the USA, and I am currently in China and will be staying there for a few months. I have no cellphone service so iCloud will only be able to track my iPhone via wifi.
Summarize this in bullet points for those who prefer a short explaination:
-Lost iPhone
-Remotely locked it
-Want to remove the remote lock but I do not have possession of the iPhone
-Can an iPhone connect to wifi even with remote lock on?
-No service (American carrier, in China, no international plan)
I need an app that uses the iphone's camera and i can somehow view it on my computer so i can use it as a spy camera, i have an iphone 4 ios 4.0.1 and it's jailbroken
I own a pair of Audio-Technica MTH-50 headphones that sound great with the iPhone. The one problem is that the input is large, and needs to fit flush against the phone. I like to have my phone in a case, so I can't really use the headphones unless I'm willing to leave my phone unprotected.
I've received about getting around this is a simple headphone adapter, which would plug in to the top of the phone, then allow me to plug my phones in above the case.
This seems impractical, as I don't think the trade-off is worth it. I wouldn't, however, mind it if I could add an extra feature. So is there a headphone adaptor/extender out there includes a remote for basic volume / play / track functions?