IPhone :: Can't Get Out Of White Screen When Clicked Power Button Again
Feb 24, 2010
i was txting people when like always when i finished, i clicked the power putton to turn off the screen. it did turnit of.problem is, when i cliecked the power button again, it gave me a white screen and i cant get out of this white screen at all.i dont see the "slide to slide: thing,
i have a curve 8520 and for some weeks now it shuts down every now and then.if i'm on the phone or in an app and generally use it,the screen gets all white.i cannot even turn power off with the button,so i remove the battery and place it again.but if i do not connect it to the pc or charger,again the screen gets white on the reboot.i don't know if you understand what's going on because
My phone will not turn off. I have held down the top button as well as set the screen to use the white key nothing works. The battery also is reading 70% which it has read all day.
This happens in both third-party and music apps. I have been having problems with my earbuds lately and I'm not sure if the problems are related. I hope that it's just a setting.
I was on instagram and it froze I hit the power button to put it to "sleep" and I tried to open it back up and its been stuck at a dark screen. I tried holding the power button in order to reset and nothing happens.. When I press the home button siri turns on but I can't get anywhere with that either.
Getting quite frustrated with this phone now. I've had my BlackBerry Curve over a year now, and I'm on a 2 year contract with Orange. But I've had this problem. My phone will be fine when it's plugged into my computer or my charger, but when I take it out and start to use it, sometimes within 5 minutes, sometimes within hours, it can come up with this whiteness filling the screen. This leaves me with no choice but to take the battery out.
Then after that it refuses to turn on until I plug it in again. This is annoying me to the extreme because I can spend hours waiting for it to charge, then when it's fully charged I'll take it out, go out, put music on or something and it'll go off yet again. Sometimes it can just cut off without the white screen. Even then it won't turn back on without a power source. I've tried updating the software and that won't work.
Suddenly my phone hanged and it got dead completely. This screen popped up when I turned on the power button. I have no clue how to fix it. I tried to reboot, but no success.
A lot of times when I pick up my N6 the screen does not turn on so I'm forced to hit the power button. What is the "trick" to get this to work? What do you normally do to turn on your screen besides hitting the power button? Or is that my only option...
My phone came up with a message asking if i wanted to update to the new software so clicked ok, it seemed to be taking ages and then suddenly went off. Now when holding down the power button and the home button it is still not working and wont restore?
I'm currently facing this problem and it's really annoying. I never update my phone or whatever because it will slow it down.
My phone went out of battery and it turned off. So i plug the charger in and waited for it to restart. After restarting it, I realize there are several settings that ran away IE: My ringtone preferences and keyboard preferences. So far, I've already readjust it, But ever since the phone restarted like that, I can no longer lock my screen, not even if it times out itself after 15 seconds. and when i press and hold the power off button, instead of showing the menu for options like "Silent phone"/Flight mode"/"Shut down" it only shows power off. What can i do to get the original settings back ?
just got the moto x 2014. How to sleep the screen without pressing power button. In that case the power button, which BTW is kind of fragile, will be free. Any virtual button we can set?
A friend of mine just switched from Android to WP and got the Icon. He loves the phone but is having an issue with the phone becoming unresponsive at times. When hitting the power button to turn on the screen it sometimes stays black and becomes unresponsive for 5-10 minutes before it will work. I think it may be a faulty proximity sensor...
My girlfriend and I both bought 1020's and they both show the backlight when hitting the power button. It happens when the device is at whatever current screen youre on, after you hit the button the screen closes as should, but then I get a glimpse of backlight.
Hitting the power button does not turn the display on. Actually nothing turns the display on. This began happening occasionally, for a few seconds at a time. Then it became a few minutes at a time. Now it is permanent.
What's truly odd is that the phone seems to be completely working otherwise. It rings, alarms go off, indicator lights flash. It connects to my car over bluetooth and if I plug in headphones and hit the play headphones' action button, music starts. If I hold the power button down, every 5s I get a little haptic feedback, and it appears to reboot if I hold power and volume up (or down, I can't recall), so I know the buttons are working.
I even have a suspicion that touchscreen digitizer is working because I think I've dismissed a few notifications by double-tapping (I'm on Lollipop). Also, I swear I have seen very fleeting, very dim views of the unlock screen a few times.
I should also add that I took advantage of Google's recent replacement policy lenience - this is a refurb I've had for a month or two.
I'm contemplating replacing the screen/digitizer on the theory that this is a broken screen. It feels like the backlight is broken. But I'd rather not spend the $$$ and time if the problem is deeper than that.
I am having trouble with my HTC Wildfire S since when I press the power button, the touch buttons switch on but the screen remains black. In order for the screen to appear, I either need to touch the screen or else wait for a few seconds until something comes up.
I don't like having to use the power button to wake my display screen. My old droid I only had to press the home key. I am afraid the power button will wear out fast on this phone.
I keep pressing the power button whilst holding the phone. Is it possible to disable power button? Also why is there a long space/gap? like the above when I type
Has anyone tried this app? It uses the proximity sensor to turn the screen on. From what I have read, the "lite" version was designed for one certain phone but the pro version ($1.28) is supposed to work on all phones. There are not a lot of reviews as it is a relatively new app but almost all are positive. It is in the Google Play Store under Smart Screen On Pro. Curious to know if it actually works as they say it does. I really dislike using the power button to turn the screen on. I guess I was so used to the home button on the DX turning it on. if anyone has tried it, would like to hear yeas or nays on how it works.
I just got my Razr Maxx and charged it before using it. When the screen time out and goes to sleep i can´t turn it back on by pressing power button. I can turn it back on by doing soft reset (pressing power button and vol down) when doing soft restart I don´t have to press pin number, as needed when i turn the phone off and back on. When the phone is in the charger there i no problem.
This morning the screen of my Z5 Compact starting coming back on after I press the Power Button to turn it off. It seems to be triggered by movement: If I'm holding the phone after pressing the PB, the screen comes back on immediately when my hand moves. If I place the phone flat on a table and press the PB, without additional movement, the screen stays off. Â The screen stays off if allowed to Sleep past the set duration. Â The past couple of days I've also been getting notifications that certain Apps are preventing Stamina mode from operating. This morning it was Facebook. Yesterday, it was another one I can't remember. Can these issues be related?Â
So i have a 2 month old sony z3 and the power button suddenly became unresponsive, today. Everything else is working fine on the device.  The screen begins to dim and then sleeps but instantly wakes up. So basically the device screen is on all the time now. I think I've tried everything i could.
I would want to bring an issue to Sony's and all the Z2 users' notice that I am trying to observe a display burn in issue on pressing the power button while unlocking the phone a lot of times and this usually happens when I have set the brightness to adaptive. When I press the power button to unlock the screen, the colors burn for a second and the backlight comes to life with all the real colors the next second.
Its been happening quite a lot now and now I am atleast able to figure out that adaptive brightness is the culprit here. I am not sure is this another bug that sony needs to fix in lollipop or what it is? But just to mention, I have recently clean formatted my phone using the repair phone method on Sony PC companion and it has not worked to solve this issue. Lollipop is seriously making life bitter in a lot of ways than being sweet atleast for Z2 users like me. We would love to see the almost flawless Z2 back as it was on Kitkat 4.4.4.
So. My Xperia is on (I can hear the notification ringtone go off whenever my phone gets a text message or a Facebook message) but it won't respond when I push the power button to light/wake up the screen. This started happening at 9PM and it is now 1:30AM. I don't know what to do.
Having issue when pressing the power button, the lockscreen will come back on for about 3 seconds and then turn off again. I can't figure out what is causing this to happen.
Has anyone else seen some white distortion across the screen right above where you swipe? Its really noticeable on bright backgrounds. I thought my screen was just getting old but when they replaced my phone because of the restart issue(didn't know it was on OS bug) it was still there! I am also having an issue where my volume buttons stop working about every three days, I have to restart the phone to fix it. This has happened with my old one and the replacement.Adroid version 2.3.3System version 4.5.596.mb870.verizon.en.usmeid a00000227b76bf
I use the alarm clock function on my BB 9550 and have been noticing the alarm does not ring if the screen is locked (i.e., using the power button function on the top of the device). Specifically, there is still an alarm notification on the screen (to dismiss or snooze), but there is no sound. That's a problem. Seems to work fine if the screen is unlocked.
This just became a problem with the upgrade to O/S version 5.0.0.607. Before that I noticed that the alarm would only be a low hum if the screen was locked, but now there is nothing at all!