Been using Lightflow to change the LED indicator colors but cant find the brightness. The phone has like 10 detected LED lights according to the app but all of them are set to off and i still see the LED but the brightness is nowhere near what my S4 was.
Been reading about how it may cause more battery drain. I've been using it myself but if I switch, I feel like I'd have to run a higher than normal brightness to accommodate for when I go outside. So thinking it may not even be beneficial then.
I came from a Nexus 5 and had to always leave my screen brightness on about 1/3 in order to preserve battery. After playing with my 6P for over a month, I feel like the battery can handle a brighter setting (with my usage). But, I have concerns about burn-in if I put the setting too high since this is an AMOLED panel. What brightness settings are you using and have you had any issues with burn-in?
Having issues with video recording and the brightness fluctuating while recording? While I'm recording a video, it's like the iso rapidly changes making the video go bright then dim very rapidly.
I'm running stock 5.1.1, and even though my auto brightness is off my phone occasionally dims my display when it's on full brightness. It's not running particularly hot (37 degrees C according to my battery widget) so I don't know what's causing it to dim.
Does anyone know if there's an easy means to reduce the brightness of the indicator LED on the 9700? Similar to the way it is a bit dimmer when the phone boots up initially. I've got the Color I'd app installed (free version), but it appears only to alter the color - but not the brightness of the LED.
I have the phone setup to auto brightness. sometimes the brightness will go up and then go back down. is the sensor just sensitive and detecting the angle changes of the phone relative to the room lighting?
I wanted to start using android pay so I decided to flash back to a stock rom instead of aosp rom. I flashed my Nexus 6 to 6.0.1, everything went fine and I set my phone back up the way I wanted. Shortly after that I would turn my phone to see my lockscreen and my screen brightness would go to full brightness until I unlocked my phone then it would bring the brightness down to a normal level for light the phone was receiving. Then it would do this no matter if I would in a dark room, in direct sunlight or in a room with average lit lights.
I am on Tmobile so I thought maybe it was the firmware, even though it shouldn't matter. So I flashed back to LYZ28N and I let the phone upgrade to MRA58X and had the same issue.
I have my brightness slider just over the Wifi icon on the toggles in the notification shade. I do have auto brightness turned on . Ambient screen is off.
Now I see that MRA58X is available as a download I will try to flash straight to that.
I was running a website online that says if you have adaptive brightness turned on to non set your brightness turned into minimal level because it'll make the screen go blank and dark pretty much. For all the people on the forum that have adapter brightness turned on, what is your brightness level setting at? Mines at about at say 35 percent or as it lines up with the Wi-Fi symbol on the quick toggle settings menu.
My screen is always at max brightness but sometimes, like once or twice a week, i see it "bounce" slightly to a "just a bit" brighter level. it happens only once, so it's not "flickering" but given it's set at max brightness i wonder why this is happening?
auto screen brightness when I am outside and receive a call is so bad that I cannot see who is calling me . So I use max brightness when outside . Is there anyway way to change/adjust the auto screen brightness
I've noticed over the past few weeks since owning my N5 that the LED notification light does not work half the time (not using any 3rd party apps to control the light just the stock setting under the settings/display setting.) Is this because I'm not using a 3rd party app or does this even happen when using 3rd party apps to control the LED?
Just curious who is using auto brightness? I'm trying to determine if better (ie. significantly) for battery life to use the auto brightness feature turned on, or if better to leave it on say 50% brightness at all times.The auto brightness is a bit annoying more distracting But I'd be willing to live with it if proven to be a ton better on battery life.My battery was sucking down real fast, and has brightly about 2/3rd full so I turned on auto brightness but found out the IM ("Hi AIM" app)i had running in the brackground was what was causing the major battery drain.Any one run actual tests on auto-brightness vs manual brightness?
Is there a setting/app which will allow me to add the brightness slider to the dropdown notification menu? I have notification toggles which adds, well... toggles, but i want the slider.
just got my nexus 6 today and I've noticed that when lowering my brightness really low the screen starts becoming pink. Is there a fix to this. Some say it is a feature but I've never really seen this on other phones and personally the pink hue is bothering me quite a bit.
My nexus 6 recently got updated to 5.1.1 and I noticed that now is going extremely dark when I turn on the Adaptive(automatic) brightness. Been using it for a month now and never had this issue, but now is going really dark...
since replaced the display on my nexus 5, the indicator of the battery charge remains always at 0% ... if the detachment from the current, continues to run regularly for a few hours. I also tried replacing the battery with an original but to no avail. If i turn off the phone there is no way to turn it back on if you disconnect the battery, attacking power, get it going in the bootloader, reattach the battery and then start.
I am generally satisfied with Google's Camera app for the Nexus 5; however, there is one feature I could really use - a Horizon Level indicator. I am taking most of my pictures using a 16:9 aspect ratio/6 megapixels setting, and for landscape pictures a Horizon Level indicator would keep them aligned. I have looked at a couple of apps which include this option (Camera Awesome and HD Camera), but from what I can see, neither provide a high image resolution/16:9 combination - in both cases I think it is around 2 megapixels.
My S6 keeps randomly changing brightness even though auto brightness is off. And so I found this option via search within settings, which may very well be exactly what I was looking for but couldn't seem find it in the settings menu in developer option(which has already been enabled).....
When I try change Notification LED Color, The primary color "Green" and "Blue" do not seem to work. But when I move the slider down, I get RED, Pink, Yellow and Cyan.
Using Elemental-X 1.02 Kernel and tried with Chroma, Noobuilds and PureNexus.
Any good recs for a USB to USB C cable that is longer than 1 foot? At work I'm constantly plugged into my lap top but this short ass cable isn't cutting it.
Is there a way in the stock messaging app, or is there a specific messaging app available in the play store where I could:
Draft a txt and then send to multiple recipients without each recipient being able to see the other? Basically the same thing as sending an email to multiple people via BCC option.
Would be handy for business purposes. I don't care if they see my contact. I just don't want them to see eachothers contact since not everyone I'd send to would know the other (and/or want their contact information shared).
Obviously I could copy and paste the same message to multiple people via individual txt msgs... but being able to send a group txt would be way more efficient.
I got my Nexus 6P in australia yesterday and I was playing around with the settings. One of the things I wanted to enable was Now on Tap but everytime I try and enable it (either through holding the home button, or doing it through Settings), it won't enable! When I click Get Started, nothing happens. If i'm in the settings app, the toggle just turns off after I press Get Started.
I searched all over the internet for the SAR level in the EU standards but all i could find is the US. (I probably not going to answer to you in the next few days going to work).
I am rooted on stock 6.0.1 with ElementalX kernel. I have Xposed installed, but I've tried disabling all modules. I've tried deleting the stock clock data and cache. There are no alarms set or off. I've checked the alarms.db file and there are no entries.
How do I get rid of the icon and lock screen info? I only have the Google Clock installed.
The only Google result says to do a battery pull on a different device. Can't really pull the battery on this phone, though.
I tried to install Cataclysm ROM, and then it went into some sort of installer, after that I tried to reboot, but TWRP said it didn't have any OS?? So i tried to boot it up anyway? but nothing, just stuck on Google Logo. After that I tried to boot into TRWP agian. But then TWRP says "Mount Decrypt Data" and then i have to enter a password?? but i removed my pattern lock before flashing.
Because i made a Nandroid and i read i had to remove the password before making a backup. But then i just press cancel. Then it says " Unmodified System Partition" "Swipe to Allow Modifications" and i do that. Now i have nothing on my SD card?? Then i thought i could flash stock through Fastboot/ADB, but now it won't see my device in ADB? I have updated my drivers, both by Google and Intel But nothing? so i cant return to stock and can't boot up.
Some how i got i to reboot by an ADB command and then i could flash factory image and return to stock.