Dropped S6 in water, turned off and left in rice bag for 2 weeks.
Tried to turn on today and it only boots to download mode, everything else just reboots the phone. Also it will only turn on when connected to USB so i'm guessing the battery is dead also.
My main concern is I have photos that I really want to try and recover and yes I know I know, always have a backup, as a desktop technician I really should have had that setup on my phone but here we are.
So my main target is to somehow get into recovery mode and then use ADB to pull files from the phone.
I've tried to flash many different recovery files but they always fail in Odin v3.10.7, log for Odin is:
I downloaded all the necessary tools and followed the steps in that tutorial and I'm now at the step where you have to put the phone into download mode. It's now just sitting here doing nothing -- stuck at 0 % for the past several minutes. After scratching my head I realized that I needed to install the LG G4 drivers on my laptop (Verizon version). It was never mentioned anywhere in the tutorial when the drivers needed to be installed so I didn't know. Anyways, I did that, rebooted my laptop and tried it again. NOTTA. Download mode, still stuck at 0% and phone isn't doing anything at all.
The tutorial says I need to save the 4.6 GB image file in the root of the internal SD card for this work correctly. I'm pretty sure i have the image in the correct location.Just before I started all this rooting business, the phone was nagging me about an "update" so of course I took the update *derp*. (bad move) Before: V98611A. Now it's at 13B
Do I need to find a new image? If that's the case, I'd much prefer to revert back to 11A if possible. I'm new to modding/rooting so I didn't think that the image I downloaded would be incompatible with my new phone post update status.Really irked that I applied that update before rooting because now it seems i night need to find an image specifically for the 13B version.
I have a Galaxy S6 that I purchased off Ebay and on the back of the phone, the model is SM-G920i but in the settings of the phone, the model number is SM-G920F. I want to get this back to original stock firmware based on the G920i. The only problem is that I cannot get into Download Mode to be able to use Odin. I have tried all of the hardware combinations and the only thing is does is take me to a Factory Mode, where the options are Auto Test, Manual Test, Item Test, Test Report, Debug Test, Clear eMMC, Version, and Reboot.
Got the S5 back in March about a week ago my phone went into headphone mode. I've tried all the tips and tricks to resolve it. All except factory resetting and resetting my phone would be my last option. Did the cotton swab, paperclip, inserting headphones in and out repeatedly, restarting, taking battery out, switching to mono and then switching it out.
I have not used my phone in any wrong way. I did not install a custom rom or anything. no root. randomly in my every day normal usage of my phone, it started to restart. and the the problem got worse and worse. for a few minutes, i will be able to use my phone but then my phone will restart and be stuck restarting. most of the times I can't even go into recovery mode. It restarts again when i get to that. I already resetted my phone, and I wiped the partition.
I have a samsung galaxy s6 SM-G920W8 telus/koodo 32 gb. i got the battery replaced by samsung but that didnt work. i noticed that after a few hours, my phone stops restarting when it reaches to 10% battery life.
I have galaxy s5 I'm currently on a vacation so I and I wish I didn't ,putted my phone in the pool,it worked fine for like 2 mins but then it told me that headset is connected although I didn't connect any,and then the screen went off,I hurried to the romm and wiped all the water inside ,but still it wouldn't work , I tried exchanging batteries,didn't work,but then outta hope I tried one last time and luckily I had a screen saying "downloading. Don't turn device off" which means that the processor and screen are working .
I recently rooted my samsung s5 to try and troubleshoot my power button not working, as when I restarted before root, it would work for a minute then stop. But after rooting i accidentally restarted my phone with a power manager app in recovery mode and now I can not connect to my phone via odin. Volume up/down to move highlight power button to select.
I had less than 7% of battery and I went into Ultra Power Saving Mode where I got only notification upper tab and blank screen below. I reboot my phone but stuck on Samsung logo. How to fix this?
Tried wipe cache in recovery mode and charging phone up to 100% but no luck, still stuck on Samsung logo.
Phone is international S6, not rooted, official. Any options except hard reset?
After turning my phone on after leaving it off for the day I am unable to connect to my Network Provider (Displays "No Service). When I look at my options it displays "Flight Mode On" under the power button options. I turn this off but it still shows Flight Mode selected under my Network Settings?
S6 stuck in download mode. I tried to unroot and flash the old stock software. It's now stuck on a screen that says to use emergency recovery or I can get it to go to download mode. When I open up Odin I don't see the blue section where the driver should be.
The last flashing process was a while back. I must have been a little rusty... Anyway, I today tried to install the 6.0.1 compatible TWRP Recovery on my Galaxy S6 920F and made several mistakes in the process using Odin 3.10.7 on my Windows PC (flashed a wrong file in AP, it was an .img and not a tar.md5). Now I'm still in the Download Mode and can't exit it at all. I tried the Home Button + Vol Up + Vol Down like 1000 times, but it still won't work. It really seems to be stuck. Odin finds the device, but when I try to re-flash the recovery the right way (at least I hope it is), it tries to establish a connection before flashing and after that it's stuck, too.
On my device the last lines are: B:2 K:2 S:2
What can I do? Is there a way to bring this device back to life?
I have the international galaxy s6. SM-g920I. I have rooted it already, then I tried flashing a recovery. Now it is stuck in the Samsung logo. I can still go to the download mode. What to do. And if I need to download the firmware file, can you tell me what the baseband is? This is urgent. I can enter download mode, but not recovery. Only have access to Odin mode right now.
I've been trying to take advantage of googles 10p app promotion but it seems that for any app I buy I get stuck at the "starting download" screen. This is the first time I've tried buying an app and its just not working. I can download free apps from the Market just fine, its just the paid apps that are giving me grief! I've googled about and tried the "clear cache" from Market app and "clear data" from download manager but it just doesn't work!
Rooted GS2 on standard O2 firmware connecting via wifi.
I was in a bootloop because of a failed ROM flash, however i could enter Download Mode and i used Kies3 to initialize my device and that brought me back to a working system (COI9) But now I have a serious issue, I don't have a download mode?
When rebooting, holding the combination does nothing, just continues me into Windows (Volcume Down + Power + Home) Recovery is accessible, but its the stock Samsung recovery, the option to 'Reboot into bootloader' also doesnt work, my S6 just starts up normally.I need Root and Xposed back, what should I do?
My phone gets stuck in headset mode whenever I plug in my earphones. I unplug the earphones and the headset icon is still at the top. Tried reinserting the headphones and pulling out and still doesn't disappear. No sound will play through my speakers when the icon is there. The only way to turn it off it seems if when I restart the phone. It happens to this on different types of earphones too. I can't listen to music anymore without having to restart my phone afterwards
i was charging my phone via usb through my laptop and it suddenly went into white/grey screen with weird screen and so i pressed the home + power and went into recovery mode (itunes + usb logo). i tried to restore it and i keep on getting error 1600. after a few hours, the screen just went black and whenever i press home + power button, nothing happens. i went to a repair shop and a guy "shocked" the battery and there it went back to recovery mode. i tried to restore it again on dfu mode and still getting error 1600.
if i try it on restore mode, i will get error 21. what i did is i plug in the device, put it on recovery mode and then put it in dfu then restore and still error 1600 ---- googleed and Internetd so,me videos until i saw a video to change the host file and downloaded it and then boom --- it was fixed! while i was fixing my newly repaired iphone 4 version 5.1 -- all of a sudden it went to restarted then went into recovery mode. after a few hours again, it went to dfu mode and i went to the repair shop to shock the battery but that didn't work until now. i can't get my phone to restore mode even if i press the home + power button. stuck on dfu mode.i have a saved shsh for 5.0.1 and 5.1 -- so i built a custom firmware with snowbreeze and ifaith but i keep on getting error 3014, 1600, 1601, 1608 on restoring it.
I recently uninstalled smoothboard from my iphone 4 via rock and now my iphone is stuck in a never ending cycle of safe mode. How I can get out of this safe mode?
My BlackBerry Curve 8520 got wet a few days ago, it's since been left to dry out with all parts removed on top of my Virgin Media box. I checked for damage today & it appears to be working fine, apart from the fact that it's stuck in alt mode.Any suggestions on how I can get it out of alt mode? The button doesn't appear to be stuck. The 'alt' icon in the corner changes to '123' when I select the left shift button, but when deselected it changes back to alt mode.I've done a few battery pulls, removed all third party applications & re-installed its OS. To be able to type normally with letters I have to either hold down the 'return/back' button, 'X' 'V' or 'B' button, or the '$' button. Whilst holding these I can select whether I want 'alt' or not, but then it returns when I let go anyway
I just got my device back from the repair depot. I sent it in b/c I cant charge my battery. Everything else worked great on the device. I was told that it was out of warrenty and it was sent back. (Not a problem, I have a broken screen 9800 that I was using to charge my battery in the first place)When I got my device back, it is stuck on a white screen that gives me an option on testing the camera, LED, FLASH, etc.. But it does not give me the option of exiting or anything. When I plug it into Desktop Manager, I get that it doesnt connect and gives the options of retry or upgrade. So I go and press update, it connects and starts working. It gets upto the JVM and then it states that it can not connect to the device.What can I do here? It was fine (software wise) before I sent it off and the depot screwed it up!!! What steps can I take into getting my Torch back to where it was?
While attempting to update to 2.1 through SEUS, the installation failed, telling me that my battery was too low. The phone is now stuck in flash mode, the SE logo flashes for a brief moment, then I am met by a screen with a phone and an Exclamation Point in a triangle for awhile, then the phone restarts and does it again.
I have obviously tried removing the battery and trying again. SEUS has the same result every time I attempt this. I have also installed PC Companion, and one of two things happen 1) PC Companion completely hangs my Win7 (32bit) machine, or 2) Prepares to repair the phone, and while 'preparing', an error pops up and directs me to the webpage.
