Cseries :: No Connection For Second Call By Helmet Bluetooth?
Jan 11, 2012
I have two Nokia C5-00 and both have the same problem, I make the connection with my helmet Bluetooth and everything it's OK, but when I receive a second call the cellular disconnect Bluetooth. If I use an old Nokia 3124 or 6730c everything run well.
I bought new phone Nokia C7 with Anna software and I have a problem with pairing with my car (Bluetooth device Parrot CK3000 Evo). I think that the problem is with phone, because when I paired devices all things work well, but when I turn off the car (Parrot is switched off) and go away, other phones that I previously used disabled connection and can be used normally. But with this phone I see that for the phone connection still present (?!?) The car symbol on display still shown, and when I try to use the phone, I can make call, other people say that they receive calling , but I can't hear them, and they can't hear me. When I manually disconnect Bluetooth device, phone work normally, but when I am in the car again, two devices doesn't initiate pairing, and again I have to do this manually.
My E71 used to work fine in car hands free via bluetooth - now it pairs OK but then gives "unable to create bluetooth connection" message. Another E71 works fine.
I did try (twice) to e-mail Nokia care - each time I filled in all details only to get a Gateway timeout message when I tried to send it - and all details wiped out!
I've had problems connecting to any blue tooth aparatus. I've tried with a couple of headsets and then this week I had a problem connecting to the bluetooth in the Sonata I rented. The bluetooth will connect but almost immediately drop the bluetooth connection.
I have a iPhone 6 (32gb) OS version 8.1.1 and a Jabra BCE-BT350 bluetooth ear piece. For the last month or two every time I make a call using my bluetooth it rings once on my bluetooth then automatically switches over to my iPhone speaker (not loud speaker, just regular). I have to get my iPhone and manually select my bluetooth device as the speaker, which defeats the safety feature of using a bluetooth. I've had this bluetooth for a while now and never had this issue until recently. Not sure its an issue with iPhone 6, OS 8, settings or Jabra.
Info: Mac Pro, OS X Yosemite (10.10), D700, 16GB, 12 Core
I use my C3-01 as a modem on my laptop. Since i updated the firmware to 7.15 the connection doesn't stay for more than 2-3 hrs. It disconnects automatically. Sometimes even after a min. Earlier i was able to connect for even 16 hrs at a stretch.
I am useing nokia c5-00.02 mobile.I just want to know Is there any way tolock bluetooth feature completely ordisable bluetooth feature. orblock all outgoing data through bluetooth orset password for enabling and disabling bluetooth.set password for sending data via bluetoothi just want this feature because if i last my mobile or if my friends use my mobile they can only view the content and they cant copy the content.
I've lost all Internet capabilities on my C7; it happened two weeks ago when I went to the middle of nowhere and had no reception whatsoever, upon returning to civilisation the normal phone reception returned fine but the Internet and email will not work at all - it won't pick up previously recognised wi-fi networks and won't connect through my WAP either.
It has happened before but always came back within a day or so, but as said this has now lasted two weeks and absolutely nothing.
Just upgraded my wifes phone to Belle, everything works fine with the exception that Social 1.5 refuses to connect. I have restored default settings, but still wont connect.
I can use the web, connect to store, asks me if I want the 3G or WiFi connection, but only social refuses to connect. I have removed and re-installed Social. Always the same, Network is not available. Social works fine on my N8 with the same settings
after updating from Anna to Belle some widgets like RSS are stoped working. Today I updated Belle to the latest version and the problem is the same: When I add RSS widget to some screen recieve the message: "Connection failed. Connection unavailable
I've a Nokia C3-00 and Sitecom WL-174 Wireless Network ADSL 2+ Modem Router 54g TURBO.
The WiFi/Modem router is working fine with PC but not with my C3-00. I'm sure there is no issue of access protection mechanism ( I switched Off psswd and MAC filter to be sure). My C3-00 see the router and initiate the protocol to get IP address from the router but it fails : "connesione WLAN non riuscita"
I'm quite sure the issue is in a sort of not compatibility between the router DHCP and the mobile because I experienced same issue with Nokia E51 on which I sorted out assigning statip IP address to it.
The issue with Nokia C3-00 is that there is no way to assign static IP Address from menu. I tried to contact Nokia support but no answer . even at the Nokia service in my town (Catania) they don't know how to do it .
is there any way to check my email on a C3-01 only using wifi connection? ( I never connect to internet by network due to crazy costs!) When I try to check I get a message saying "communication error, please try later" I know there is no communication problem 'cos I can go to web pages etc ( while on WiFi)
the problem is the connection gprs is start automatically , when i use the chat or nimbuzz or ebuddy the gprs start automatically i can't work the apliquation with WLAN !
My nokia c6-00 just lost all my Access points for connection (Connectivity -> Destinations:/ ) I used to have Access points from my supplier, But I no longer do. And now I can't connect to internet. What can I do to bring them back?
Yesterday the software update Nokia Belle for C7 was approved for my region. I installed it instantly by following the instructions. After the update my device worked well, but I noticed some things that may point to a software problem on the device. I decided to reinstall it. I followed the instructions, the Nokia Suite checked and found the installation file on my PC and the reinstallation began normally. A backup was made of my contacts and other stuff, then the installation began.
Not long after that the Suit says that the connection to my device is lost (not a windows warning). It suggested several things to do to continue, but it couldn't. Currently my C7 is not working. I tried to remove and put back the battery & recharge it but still can't start the phone. When I plug it to my PC via USB, I hear the windows sound for USB device connected and disconnected after that. The only living sign of my device is the little white light, next to the USB port, which is blinking when I plug the charger and try turn the phone On.
After updating my Nokia C7 to belle I have noticed that the Social app fails at connecting to the internet, be it wifi or 3g. As soon as it starts it says: Network is unavailable. please try again later. I'm in the UK on 3 network.
I have problem with nokia c5-03. My cell start automatic wifi searching, while i have disabled all posible option to search wifi automatically like (Show WLAN availibility = Never, Internet Connectivity test= Never Run). Beside these setting, i also delete all wifi Network destinitions. but still i found after every 2- 5 mins device prompts for available wifi connection. I dont was such prompt.
software Version 22.0.007 Software Version Date 30-12-11 Custom Version 22.0.007.C01-01 Type RM-697
My phone connects to the Bluetooth in my e46 M3 ('05) fine but as soon as it rings and I answer the call (pressing call button in car) the phone takes over rather than the in-car Bluetooth. It shows a dot next to the Bluetooth in-car when the call comes in on the phone.
Whenever I am trying to connect to WLAN, it got connected but the moment I start browsing, it displays message 'Connection Failed - Access Denied'. Sometimes, it shows 'Invalid Server'. I am really not sure why it is happening as 3G is working fine in my phone.
I have a Nokia C6-00 and the battery is not lasting more than one day operating with connection in dual mode. Is it normal? What can I do the extend the life of battery?
my previous blackberry automatically connected to my Merc car radio as soon as I turned the radio on. My new bold 9900 has to be synced/ paired each time.
I've recently upgrade the software on my BOLD 9700 bundle 2475 (v6.0.0.546, Platform 6.6.0207). Since the upgrade my handset will not connect to my Ford Mondeo car kit. I've deleted the pairing on both handset and car kit a number of times - it works the first time I get in the car but after this I just get an error message "connection failed". The car kit works fine with other members of our family mobile phones - toggling between handset and connecting everytime. I've even tried deleting the other phones from the car kit - still it will not connect. I've even rebooted the car system just in case there was a problem with the carkit.The only way I can get the handset to connect is by switching my phone off and turning it back on once the engine is running. it worked fine prior to the upgrade...
My BB 9700 cnnected fine with my handsfree carkit when I used OS5. After going to OS6 the connection with my carkit always gave troubles. I've experienced that after a reload of the OS (battery out and in again) the conection works fine one time. After disconnection it will not work again, only after reload of OS (battery out and in) it works again for one time. This must be a bug in OS6.
i bought my nokia c3-00 two weeks before, i have connected my phone via bluetooth to my car audio (ford figo), there is no problem in connecting the phone, i can make calls and receive and use all the features of the phone, but i coudnt play my music /mp3 files via blue tooth to the car audio. earlier i was using samsung star 3g, and there was no problem in it.
I have C7 with Anna SW in it (022.014). What I noticed was that when other devices are trying to pair with the C7 it automatically fails. BT is visible to all and the are now block connections. The other devices can find my C7 but somehow C7 rejects the the other devices immediately and won't even prompt the safety word (or security code?).
But when I initialize the pairing from the C7 everything goes fine. The security number is prompt and pairing is finalized.
I have not tested this whit other phone (5800) and PC BT software.
It is a problem because Nokia Suite (3.2.100) needs to do the BT pairing. And it won't accept even if the C7 and PC has already paired.
I recently purchased the C2-00 (RM-704). I have thoroughly tested the phone and am happy with its features except for an issue with low volume while using bluetooth with a hands free car kit. I know it is a basic phone but the ability to use a bluetooth hands free car kit was one of my mandatory requirements The issue seems to only be the output volume through the cars' speakers. I do not have this issue with any other phone, including Nokia C2-01 and Nokia E71, and other non-Nokia devices. When making calls the other party seems to hear me fine, indicating that the microphone volume is OK, but it is very hard for me to hear the other party even at maximum volume. Due to the road noise I have even had to pull over and stop the car so that I can have a conversation, which totally defeats the purpose of having a bluetooth hands free car kit.
I have laptop with Nokia Suit 3.4.49, nokia C6-00 Software Version 41.0.010.When i am trying to connect my phone to laptop, nokia suit detects my phone through bluetooth, but not further action is initiated, not able to sync anything or send songs from laptop to phone.
I have a new Nokia X6 and can not connect it via Bluetooth to any of my PCs, the previous Nokia 6300 did with no flaws whatsoever, this X6 is by far a better phone but can not even be detected by a PC.......Am I missing something ? (see attached for error message)
I installed ovi-suite on my windows XP laptop and tried to connect my X6 using bluetooth. I was able to punch in passcode on my X6. Then ovi suite simply won't continue recognizing my x6. I do see my laptop been paired in my X6, but ovi-suite simply won't continue to next step. After a while of "searching" ovi suite simply shows an error and the process continues. So how do I connect x6 to my PC with bluetooth?