BB Bold 9700 :: Double Blinking Red Light After Failed Update
Jul 6, 2010
When I installed my BB Desktop Manager and first plugged in my Bold 9700, it asked if I would like to update various features on my phone, to which I accepted. The update froze- I can't remember quite at which stage but I recall it was at the end stages and the stage at which it froze started with JVM. After waiting an hour or so, I disconnected my Blackberry, not knowing what to do. The screen remained black and the red light started blinking.I looked up fixes for the problem and they seemed simple- one used JL_Cmdr to do a full wipe- but I am using Windows 7 and it isn't compatible. I get a brief command prompt screen for a half second before it closes.
The second fix involved using the command prompt to get to the Loader in the AppLoader file- but I ran into another problem- when trying to open Loader.exe, I got a "The Application Loader requires the Blackberry Device Manager to be installed." Then looking up THAT fix, I downloaded a new OS and redownloaded the Desktop Manager, but am getting the same error.
So my bold 9700 LED light will start flashing for a few seconds and then stop, about every ten minutes or so. I don't have a message or any notification and it drives me crazyyyyy. Does anyone know what I can do to stop this!
my blackberry 9700 wont turn on and the red light comes on for a lil than it starts blinking but still wont turn on and the charging lightning bolt wont come on either.
I've recently got a brandnew blackberry bold 9700, which I've got one day now and it just won't turn on anymore. I rebooted it because I removed an app, and the only thing it does now is blinking the red led light 4 times in a row. I tried almost everything (apploader, jl_cmder, leave batt out for one hour).
new to blackberry in general. have the bold 9700 and mostly have it on silent so i rely heavily on the red led blinking to signal a missed call. i could have sworn this was always the case cause a vm would generraly acompany the call. the other day the light was green so i thought i was good but in fact i had missed an important call. is this the way it is or is there a setting to have the led blink red with a missed call just like a message.
I have this old 9700 I got from a friend that he says is bricked. I took a look at it and when I put a battery on it, it blinks twice, pause and blinks twice again. It does that and never loads. So I thought, this would be an easy fix. I would just reload the OS and it's good to go. But I was wrong.First thing I did is I went and installed an OS6 (.650) and tried the loader.exe but when I click on Next, it does't recognize a PIN, it says USB-PIN: UNKNOWN. I clicked on next nevertheless and tried to reload the OS but then it won't go past the Loading JVM step which is the second step I guess, being 'Erasing Applications' as the first one. I left it for a couple of hours and it still won't load the OS.Next thing I did is tried to wipe the phone using BBSAK, CrackUtil and JL_Cmder. With the CrackUtil, it says 'Phone not connected' while the JL_Cmder won't let me wipe it. It just keeps on going back to the Menu after I've typed 'blackberry'. The BBSAK won't recognize the phone either.I tried using Desktop Manager as well. It can see that the phone is a 9700 but on the PIN, it says 0.One more thing I noticed, when I put on the battery, the red blinks but when I take off the battery and just plug the USB cord, it won't do anything. My computer will do something (makes a sound and 'recognize' the device in a way) ONLY if I have the battery put on before I put the USB cord on. If it's the USB cord alone, without the battery, it stays dead. Which is weird since in my experience, my computer always recognize BlackBerry devices whether a battery is present or not when you plug the USB cord.Oh and BTW, now my computer doesn't read my phone anymore, whether I put the battery in or not. The phone keeps blinking though, when I have the battery on. Blinks twice, pause and do it all over again.
The red light is keep on blinking ... And I am not able to start the phone ..... When I put my phone charging the red light appears and keep on blinking .... And it blinks when I remove the battery ..... I tooth my battery might be dead so I charge it from external source and put the battery back wide almost full power ....but its not working .
I left my phone charging last night, and when I woke up I just saw the red LED blinking, but it doesn't turn on. THE DISPLAY DOESN'T TURN ON EITHER, so it's not the problem in which the phone reboots over and over. The LED just blinks and then a long blink and then a pause. My computer won't recognize my cellphone. I tried batter pull but it didn't work.
I Have Sony Ericsson w610i about 2 years and before one week. It started stucking and I had to put of the battery and making reboot to be unstucked. I tried to update it with SE update service but it stuck in the middle of the update and after that it doesn't opens. Only a red light blinks. I checked the battery but it is ok. So as I searhed I found out that the problem is the EROM or GDFS. I am trying to repair it with flashing programs, but nothing.How can i fix it?
Screenshots: SETOOL2LITE Identify http://img202.imageshack.us/img202/1654/w610i.png JD FLASHER http://img405.imageshack.us/img405/2744/jdflasher.png OFLASH ERROR http://img143.imageshack.us/img143/7282/jdflasheroflash.png OFS ERROR http://img251.imageshack.us/i[....]80/ofsstartingfssevererror.png SE King Identity http://img5.imageshack.us/img5/8121/seking.png XS++ Identity http://img130.imageshack.us/img130/97/97587919.png It appears as Z520, but it is W610i! Backup GDFS After Identity http://img132.imageshack.us/img132/6471/xsidentifybackupgdfs.png Flash After Identify http://img693.imageshack.us/img693/3593/xsflashingmode.png
I baught my blackberry Bold 9900 this year (March 2012). I've been using it since then but recently it started developing problems like freezing and all. Last night the battery was around 30% (Enough to last couple of hours) the phone just freezed and won't turn on. It keeps flashing red light 3 times every 3 seconds.
I don't own one but am scouting out the BBB9900. I saw a uTube video and the phone had a red light blinking on top right hand side of phone. Blinking lights bother me on a device I need to work with. When is it blinking, How long, and when does it not.
Does the BBB9900 have an external antenna port so I can boost the reception ?
I upgraded UT to 0.945, and for a reason it keeps blinking when I launch it, knowing that, there are no DM or mentions/replies posts. I'm sure it is something has to do with the options and it bugs the helll of me not finding it.
I have a remaining problem with LED blinking light:How to disable this red blincking LED while a call is in progress?I could not find the info on the internet.
Sometimes when I have a new email, sms, and BBM, the LED will shut off or stop blinking after a certain amount of time. I was just curious to see if this was a glitch with my phone, or it was a bold 9700 thing. Or it was just something normal?
I want the 9700 to blink red only when I have something of attention.Please help, I do have IM+ installed on the 9700...I've turned off the LED network coverage, etc etc...and yet even when I dont have any emails, im's etc....the silly thing STILL blinks..I have Bebuzz loaded which is fine I think...But for the life of me I dont know why it's flashing...
how long does the led stay blinking after you receive a text msg?im askin because i have heard ppl say it blinks forever, until you acknowledge the text, but today i got a text at 6 (i was away from bb) but when i came back there was no led blinking. at 10 i got another text i was with my phone so i looked at it, and saw 2 new msgs.. 1 received at 10, the other received at 6
Just wondering if your bold drops calls as frequently as mine does. it seems that sometimes the phone decides to act up and gives me a 'call failed' message whenever i try to make a phone call. I always check how many bars i have and its usually at 4 or 5. sometimes a battery pull fixes this, but other times, the problem is persistent. my old bold 9000 had the same problem, so i'm not sure if it's at&t or blackberries in general.
I've recently acquired a blackberry pearl and I'm wondering if there is a way/application to keep the LED light blinking red until I've read the SMS or looked at the missed phone call (instead of timing out after 15 min). I know there is an application like buzzme, however I really don't need all those customizations and was wondering if anyone knew of a free application to just keep the light red until the SMS has been read.
the red flashing light keeps on blinking but i dont have any notifications. it kinda bothers me because this didnt happen before. it started affter i updated my phone.
I dropped my blackberry and it hasn't worked since. It wont turn on but it will for a few minutes, then will randomly shut off and blink like 2 times in a row in perfect intervals. After it turns off... it will not come back on no matter what. I have tried a different charger and even bought a new battery to put in it... But nothing has changed. Its still the same red light! Is there anything I can do that I haven't tried, before taking it to a repair shop
I don't see any notifications anywhere to clear other than the quick toggles I use. I'm thinking those might be the culprit since they're basically just an omnipresent notification, and the light stops blinking for a time once I pull the notification shade down. Having a constant green light going off? Also, whatever it is could be the same thing that's keeping the CPU awake all the time. It doesn't seem to be affecting battery life too much though.
when v recieve any notification for eg.message it blinks a green light.n keeps blinkin after regular interval.bt now i can see a blink only when i recieve a notification,bt it doesn't blink after regular interval.
