I have had my phone for a few months, and all of a sudden, the dial pad won't pop up when I want to make a call that is not in my contacts. It works fine when I am on a call and need to enter numbers in the dial pad. I have three ways - from the little phone icon on the bottom of the screen, in Recent Calls or Favorites on the Dialer tab on the top of the screen, and in Dialer under Apps.
View 5 RepliesI installed and configured cisco jabber for IP-dialing,
but i only can receive calls how i can dial a call on Xyboard??
I upgraded yesterday, and the only issue I seem to have is not being able to dial directly from my browser.
I did a search from Google for Walgreens in my local area. After finding the number, the browser shows the phone number in a "gray" box. When I click the link for the phone number, my dialer pops up, but ther number doesn't carry off.
How do I delete someone's number out of my speed dial?
View 1 Replies View RelatedOne thing I miss that my old Blackberry could do is to automatically dial both the conference bridge number and the passcode. In the location field on calendar appointments I could type the conference bridge number, then "x" and then the passcode. When I clicked the number, it would dial it, and then prompt me to enter the passcode. For example, if the number was 800-555-1212 Passcode 1234, I would enter it in the calendar as 8005551212x1234. It would dial the number, and then prompt me to click ok to enter the passcode number (1234). The RAZR will let you memorize one conference bridge, but that is all.
View 3 Replies View RelatedI just performed what seemed to be a fairly major update. The phone is stuck on emergency dial and a soft reset hasn't helped. In the background I can see that incoming mail is being registered, but I can't get past the emergency dial screen.
View 5 Replies View RelatedI just found a problem with my Bionic today. I was trying to access my voicemail and had to hit the number 1 on the dial pad during a call to enter my mailbox number.
The number 1 would not do anything during the call. All other numbers worked. If I kept trying to press the number 1 the screen would go black for a second then return with the dial pad. A factory reset did not cure it.
I went to a local Verizon store and the person there told me that this is a known issue and it only happens when the volume is up full. He then said that I have to put the volume down to 1/2 in order for the number 1 to work properly during a call
I called Motorola when I returned home and was told that this is not a known issue - they never heard of it.
Researching on Google and this Forum I have found others that have had this same issue. I have not heard of any resolution yet.
Both Motorola and Verizon Phone Tech Support recommended replacing the phone. Verizon Tech Support was supposed to call me back in an hour after my call with them to see what I wanted to do but never did. I was supposed to keep trying the number 1 after they had me force stop and clear the dialer and virtual keyboard. The problem still exists.
I only have a matter of hours before my 14 days is up at Verizon at which point I will be given a refurbished phone. For some reason I could not log onto this forum today to post this. I just now got in.
Do any other owners of the Bionic experience this? I don't want to replace the phone if they all do it. It's down to the wire now!
I took the "beta" update to My Motospeak and now I cannot give voice commands to dial from my bluetooth! How do I fix this or get back to the old software? I am using a Bionic with a compatible Mototola bluetooth.
View 15 Replies View RelatedI would like to know if I can use voice commands to dial a call and then dial into an extension or conference number. I often take conference calls while I am driving and being able to get into the conference room without manually dialing would be great.
View 6 Replies View RelatedUnder 2.3.4 on the Bionic when you placed a call using the stock calling app you would see under the photo of your caller his/her Facebook status update (providing they were linked via Facebook).this seems to have been removed on 2.3.5 with the Razr.or am I just not flipping some switch?
View 5 Replies View RelatedWhen placing a phone call the Droid Pro seems to dial the number then as connection is being made it automatically ends the call. Then it automatically redials the number and it connects properly. This was acceptable until I tried to use the blue tooth connection in my car. How do I fix this?
View 3 Replies View RelatedI am using a Droid Eris and a BlueAnt V1 earpiece. The BlueAnt offers voice-controlled speed dial on with phones that "adhere to the Bluetooth specification for speed dialing."For example, I should be able to say "Call Speed Dial 8", and the headset would tell the phone what to do. The V1 recognizes my commands (and repeats them), but when it sends them to the Eris, I always get a last-number redial.I suppose that means the Eris isn't fully Bluetooth compliant. Odd for a relatively new phone. Any hope in getting this to work? (and is this the best place to ask?)
View 2 Replies View Relatedis anybody know about rocket dial? if u know how to dial double digit speed dial number ?
View 3 Replies View RelatedI have a brand new ozone that I need to program for Pageplus. I need to dial *22890, but I can't dial. The phone prompts me to hit the send key which dials *228, which does me no good. Is there any way to make this thing dial the number I need?
View 3 Replies View RelatedI would like to know if it is possible to change this number from within the phone. Right now it is not calling the proper number for voicemail.
View 1 Replies View RelatedI'm having a senior moment, I choose the option to "auto show dial pad", and now I don't remember how to turn it off. Does anyone know how?
View 3 Replies View RelatedHas the add direct dial to homescreen been removed in ICS? Or am I not looking in the correct place?
View 3 Replies View RelatedI am not able to understand the behavior of photons stock dialer application. Say I have 3 gmail contacts with phone numbers listed in order mobile first and Home afterwards:
Mike
Mob:XXXXXXX
Home:YYYYYYYYY
Dan
Mob:AAAAAAAA
Home:BBBBBBBBBB
Tim
Mob: CCCCCCCCC (set as primary selected)
Home: DDDDDDDDDD
To dial Mike from the Dialer, i key in 6453, Its brings up Mike with Home number
To dial Dan from the Dialer, i key in 326, Its brings up Dan with Mobile number
To dial Tim from the Dialer, i key in 846, Its brings up Tim with Home number
As you can see above the behaviour seems to be random. I want it to always bring up the mobile number. For this I tried couple of things below (did not work):
1. Deleted all contacts from phone and gmail and imported to gmail from csv again ensuring the order of phones listed is correct. I even verified after sync to photon that the order is mobile first and then home for all contacts.
2. Tried setting Mobile number as primary number by pressing the number under contact and setting it as primary (like for Tim above).
I have a Motorola Atrix on AT&T. I've called technical support multiple times but still have the issue. In my apartment, my phone shows full bars but when I dial a call out, the phone will hang up right away. Other times it will hang itself up and error "call failed".
I've been to the corporate store where they have given me a new SIM card, but it still does not fix my issue. I am trying to figure out if this is a hardware or network issue so I can contact the right people to have the issue fixed.
If my phone is showing full bars that means I have network coverage.
I swore I could hear them when I first got this phone back in early November. I just noticed as I was keying in a phone number, the touch tone is barely audible. Like I held my ear to the rear speaker, and the sound is very faint. I have Sounds:Dial pad touch-tones checked. While the dial pad is open, I turned the volume rocker on the side of the phone all the way up. All that did was turn up the in call volume, did nothing for the touch-tone volume. I have tried turning up all the volume sliders to see if it had any effect. No, that didn't work. I also tried the hard re-boot (power and volume down buttons), and still no luck.
View 3 Replies View RelatedHaving searched high and low, I am still unclear as to wether my Xoom WiFi is capable of dialing a simple telephone number. This eminates from my asking Speaktoit Assistant to dial a number and she keeps saying that she is unable to find that name in the contact list. I am using GoogleVoice Contacts.
Is the problem that Xoom WiFi can only access numbers that are on an installed microSDHC card?
I do not have one of these cards to install yet. If someone can tell me if Xoom WiFi can do this, please tell me what I need to do.
Just recently my voice-dial over my bluetooth stopped working - when I hit the button on my headset, all it does it redial the last number I had dialed. I'm not aware of any phone updates since it last worked. I've powered the phone off and on and still no luck. It was bad enough when I had to "wake it up" in order to use it. This is very frustrating - when I'm driving, I'm on the highway. I'm not stopping regularly for traffic lights so I can dial!
View 3 Replies View RelatedHow do I create a speed dial number? Meaning I press one button and the phone dials (my wife!). I can't find it in the manual and have tried looking under every setting. I thought it existed in the contacts area as an option for the contact but I don't see it there now.
View 1 Replies View RelatedMy Photon automatically defaults to the dial screen when I press the call button from the home screen. It used to display the last tab used or recent calls if I had missed one. I have scanned through all of the options and can't seem to find an option to change this.
View 1 Replies View RelatedDoes Motorola intentionally make their new products inferior at release?I've been using a Droid and a Droid 2 for about 18 months.I shoot a lot of pictures outdoors, some macro, lots of nature and concerts.I also shoot indoors under challenging conditions (concert lighting.) They have both prtovided a passable point-and-shoot camera.The Droid 3 camera is dissapointing in that several important features have vanished:
-There is auto white balance, only a manual and difficult-to-use control.
-The user can no longer set ISO
-The user can no longer set EV
-Focus is iffy under a variety of conditions
-Photos have a bluish cast under most conditions, with and without flash
So instead of getting pretty good shots with a convenient camera, I'm getting washed-out, bluish garbage.(Issues with the video vs. Droid 2 also, in a separate post.)I want to know if Motorola intends to make the experience of this camera catch up with the spec soon, or if i should return my phone while I can still get something else from Verizon.
Just received the GB 2.3.3 update on my Droid X and all I can say is WOW!does it ever change the look of the phone. Still getting used to the changes but one thing I've noticed is that when you click on the blue Voice Dial button on the phone page, it syas, "Application is not installed on your phone". if this was by design with the 2.3.3 update? Is so, can you please advise as to where to download the app. I had voice dial on the previous version.
View 1 Replies View RelatedI used Google's https: market.android.com to transfer all my apps from my Droid 1 to my Bionic. By and large it was seemless and quick. However, less than half of my Gallery pictures made it over. Because the Gallery is a stock app and not in the marketplace it is not on the the above market transfer desktop application.I also have astro and estrong on my device.
View 3 Replies View RelatedAfter several months of going thru various LG, Nokia and Htc phones, I couldnt pull the trigger on who I was going to give my next 2 years to. And if any of you have been with Verizon for a while you guys know how we cherished that NE2 (new every 2 yrs and 100 dollars towards it)....lol. With Verizon pushing the Blackberry and tons of dumbphones (2009) I even considered changing carriers. So after months of media hype I decided to wait before the change. In Dec of 2009 I got a OG Droid. Awesome phone which my daughter uses now. In Dec 2010 I got a Droid X and in Dec 2011 I got a Moto Xoom wifi. I chose the Xoom this year instead of a phone because I honestly feel that the DX2 and the Bionic shouldve been 1 phone instead of 2 phones tryning to fill gaps till the Razor came out.....thats another story for another time......To sum it all up: The OG droid will always be one of the phones that changed the market! The first android phone that was released to Verizon's Captive Audience with only blackberrys and dumbphones to choose from.....
View 1 Replies View RelatedOdd, one of our Droid1 phones just started to not ring only from other cell calls - the ringer works perfectly from landline calls. We have checked every setting we can think of - rebooted - pulled battery - nothing reinstates the ringer from cell numbers.
View 2 Replies View RelatedI can here my ring tones and text. When calling another caller I cannot hear the phone ring or the other caller. I rebooted which h didn't help. I also gave it a hard boot and pulled the battery.
View 1 Replies View RelatedI am trying to encrypt data files on my Droid. Does anyone know where this option is in the Droid Security Settings?
View 6 Replies View Related