I have just purchased a new Nike + iPod sensor and the 'Sensor' option on my iPhone 4S has remained greyed out (or disabled) throughout. Actually activating Nike + iPod from Settings proved problematic at first. Attempting to launch the app from the home screen does not work, in fact it simply crashes within a few seconds of launching.
Info:
iPhone 4S, Windows
7
When I click Nike + iPod in settings, the buttons are all grayed out.
Info:
iPhone 4, iOS 5.1
I don't want this app taking up space. I've tried to delete it when I sync but it won't go away.
Info:
iPhone 4S, iOS 5.0.1
I cannot get the sensor to conenct to my iphone? I even bought a new sensor and am getting the same result. My girl friends sensor does connect to mine, but hers is not always available, what do I do?
Info:
iPhone 3GS, iOS 5.1
I just bought a brand new pair of Nikes with the Nike+ sensor built in. I tried to activate the sensor by walking around as it said to do but it just stays on the activation screen and doesn't seem to recognize the sensor at all. I can't see anywhere a battery would go so I don't even know if it came dead on arrival. I have an iPhone 4S running iOS 5.1.1. They're great shoes and I can live without Nike+ as I have all these years but it would be nice to have. I'm disappointed that the shoes themselves came with no sort of instructions.
Info:
iPhone 4S, iOS 5.1.1
I know there's supposed to a shuffle/repeat option on my iPod... But there isn't anymore!! My songs are stuck on repeat =( this has happened before (still don't know how) but I fixed it...
Info:
iPhone 4, iOS 5.1
Sorry if this has been posted before, but whenever I'm listening to the iPod and I go into Settings the music stops. Bug, or does Apple have it set this way?
View 8 Replies View Related1) I want to change the proximity sensor settings i.e. turn off or on. apart from the secret menu is there is a way to do in x10 mini. I am using droid 2.1
2) When one receives an sms an envelope icon appears in the notification bar. how do we disable that feature.
so this "nike + ipod" app appears after i JB and install winterboard. i've never downloaded it, and when i click on it, it just crashes. so i re-spring the phone and it dissapears..........but shows up on my sbsettings/hide icons, as "on" (don't hide). anybody wanna tell me how to remove this?
View 13 Replies View RelatedMy Settings is Missing "IPOD" and I want to use Home Sharing.
Info:
iPhone 4S
my iphone will not link to a new nike plus sensor, under settings "nike+" there used to be an option to link a new sensor, there is no longer that option it just says walk around to activate your sensor. I know that the sensor battery is fine as it is a brand new sensor. There are no other sensors anywhere in the house. I have tried going as far as resetting all the factory settings on my iphone and reloading everything. I have also tried turning off the nike+ from iphone and turning it back on again, as well as pressing and holding the button on the back of the sensor.
Info:
iPhone 4
I have the Nike+ GPS app, and it has worked fine for almost a year, but a few weeks ago it wouldn't let me log in to sync my runs anymore, and today it stopped working entirely, quitting on startup every time... what I can do to fix an app that quits on startup all the time?
I've tried deleting it, and installing it again, but that just made me loose my saved runs, so I restored my phone from a backup, and now the app is there and should contain my data, but it quits on startup!
Info:
iPhone 4S, iOS 5.0.1
I want to buy an ant+ Cadence sensor which is really inexpensive and I'd like to know if I could pair it and use it as a SPEED sensor for my bike. Since a cadence sensor just counts how often the magnet passes by it then I guess they are the same as speed sensor.What would be the steps to complete this? or are the profiles baked in the firmware of the sensors and there's no way for the Motoactv to profile it as a different type of sensor?
View 2 Replies View RelatedI've just bought a 5230 and I'm really annoyed that I don't have the functionality my E51 had where if it was really dark the screen would dim down. This is an important thing to me since I tend to read at night and I dislike having to go all the way to settings and so on.
Do you know any piece of software that could change screen brightness based on the light sensor readings?I'm just amazed the phone software doesn't do that on its own but hey s60v5 is worse than s60v3...
This app is for runners to keep track of where and how far you went throughout a jog. If I'm jogging with my iphone4s for an hour, how much data will be consumed?
Info:
iPhone 4S, iOS 5.1
When talking on my iphone4, I continually push buttons on my phone with my face.I've learned it,s a problem with the proximity sensor. Is there a fix for this problem.
Info:
iPhone 4, iOS 5.1
got my iphone 4 this morning, and the face sensor works, but it seems to randomly not. on almost every call i've made today i find my face is randomly popping stuff up during the phone call...anyone else experiencing this?
View 17 Replies View RelatedNoticing someting wierd with my new iPhone 4 - the proximity sensor doesn't seem to work well (or at all..)When the phone is up against my ear or if I'm cradling the phone between my ear and shoulder the proximity sensor should disable the screen and touch controls until it detects that I've pulled the phone away from my head. My iPhone 3G excelled at this. My iPhone 4 however seems to want to keep the screen on at all times, causing "cheek dialing" issues, mostly trying to initiate FaceTime.
Anyone else experiencing this?
So I've had my iPhone 4 for a day or so now and have noticed the proximity sensor is much weaker and you have to be pushing your head against the actual phone and that when I have speakerphone turned on the mic does not work. This problem is only confined to speakerphone, the mic works in every other situation even on skype speakerphone works.
View 10 Replies View RelatedI have fixed my proximity sensor and can now make calls without hanging up/muting etc. I was having severe problems with the proximity sensor on my IPhone 4. During calls my ear was hitting mute, end call, face time etc. Today I had the hardware replaced at a retail store and restored a backup. The problem remained. Then I read a post on this site suggesting resetting the network settings and thought, why not, Apple had no fix.
Before I started I tested and recorded that the proximity sensor required my hand to be about 5mm above the sensor before it kicked it and blanked the screen. Then I used Settings/General/Reset/ Reset network settings. After this the proximity sensor worked at about 3cm under exactly the same conditions. I have continued using the phone including setting my WiFi password which had been cleared.
This wont clear everyone's problems but: As it takes 30 seconds and doesn’t wipe your phone, give it a try before sitting on the phone to Apple, driving to the Apple store etc. Besides they don’t have a fix yet. My testing pretty much proved that for me, changing hardware didn't help but a configuration change did. Therefore even though other users may have other setting, which in combination with a complex bug mean this fix doesn't work for them, it is a software bug in some cases, probably most. So Apple should work this out in the end and post an update to the OS.
If this fix doesn’t work for you and you want to do something, test your sensor by starting a call, leaving the speakerphone off and putting three fingers over the top of the phone covering the entire phone above the screen. If the screen blanks when your hand is close but comes on when less than a couple of centimetres away, then see if a software fix helps. Take a backup and then wipe the phone and then retest.
My big beef with the phone is the proximity sensor and if I'm in a call longer than 5 minutes, I can pretty much rock the phone off my ear ever so slightly and the screen comes on. My only fear is that once I get it there, the genius won't be able to replicate my problem and tell me it's fine.
Basically I'm asking for advice/tips on what to say to this guy (I've never been to an Apple Store and I haven't heard how nice the people are in the Florida Mall) so I don't overreact to whatever this guy is going to say to me.
I'm also curious to know if anyone else has had Apple replace the phone for this specific issue because I seem to be the only one out of my batch of friends that is having this problem. Even when I use their phones, I cant seem to find an issue.
Again, any advice is greatly appreciated.
I've noticed that when I talk on my left ear (which is how I always talk), I have CRAZY problems with the proximity sensor. I cannot go through even ONE call without either putting them on speakerphone, hanging up, going into contacts or dialing numbers by accident.However, when talking on my right ear, no problems at all it seams. I don't know why but it's annoying as I can't talk on my right ear, it just doesn't feel right and I'm not used to it.What have your guys' experiences been with this?
View 5 Replies View RelatedDid 4.0.1 fix your proximity sensor?
View 5 Replies View RelatedI got my nes iPhone 4s like a month and a half ago. After 2 weeks the proximity sensor stopped working, I took it to my carrier and the held it for a month (they say it was sent to Apple), they said they fixed it but that issue remains. I've tried all kinds of resets but nothing is working,
Info:
iPhone 4S, iOS 5.1
last week i upgrated my Hardware form 4.1 to 5.1.1. Until this time everythings are ok. On my old firmware my proximity sensor working Good but in my new hardware not working. My iPhone is black and o tried all the things restarted, reset, restored, and turned my old firmware but nothing... Everythings goes the bad. Yesterday in my room and it was so dark i saw on dial screen top the loudspeaker a red light if i close dial red light is closing if dial a number red light is turning on i thing the proximity sensor is working as technique,but not working as software bug what can i do?
Info:
iPhone 4, iOS 5.1.1, Proximity sensor not working
So I recently upgraded to IOS 8.1.1 and since I made that update with my iPhone 5 32gb my proximity sensor has stopped working and has caused me to face time or end calls or mute conversations with my cheek while on a call. I have done a soft reset, and rebooted numerous times and the problem persists.
Info:
iPhone 5, iOS 8.1.1
proximity sensor not working on ios 7 in iphone4.can i downgrade to ios 6?
View 2 Replies View RelatedI update my iphone 4 to ios 5.1.1 ,after update ios i am unable to find APN settings for EDGE/GPRS settings?
Info:
iPhone 4
I had a bit of an accident with my iPhone about 8 weeks ago, some tool spilt their drink down my leg, which got liquid into the docking port of the phone (sensor has been tripped) The backlight died and the phone wouldn't play sound out loud, although if it was rang it was fine (??) I left it switched off and the next day it started to function normally again.couple of weeks later and the backlight has died again, this time for good. i've tried resets etc, and it looks as if it needs a hardware repair, an LCD screen one would assume. The phone has been opened by a 3rd party, and they quoted a £110 repair, so i've decided i'm going to buy the part and fix it myself.
Will replacing the LCD solve the problem, as i have read of occasions where this has not fixed a backlight problem?Any ideas on where I can get the cheapest deal on a replacement 3GS LCD screen?Could this be a problem thats related to something other than LCD?
I've had an iPhone 3G for one year and a half. I Opened it up a few months ago to change the back cover, which was broken; and I broke a bit the plastic piece of connector 3 of the mother board (see at the Attached image); However, It worked perfectly... Until now, that I've reopened my iPhone to change again the backcover (false covers aren't very good...), and when I finished... Noticed that the earpiece is not working! I can't hear anything while calling! I know that the connector 3 of the screen is the cause, because proximity sensor isn't working neither...
But my question is:
Is there any way to know which part of the "connector 3" has been broken? The MoBo, or the Screen Flex? Because if it's the second, I can replace it for a few bucks, but if not... :S Or... Is there any other connector that I could damage or put badly, so they are doing contact with wrong pieces, etc etc? Notice that I had to disarm the whole iPhone to change the cover... So perhaps.
Earpiece and proximity sensor do not work. I can hear people fine when they are on speaker. The screen does not turn off when I place my hand over it.
View 4 Replies View Related