Huawei Nexus 6P :: Unlocked Bootloader And Rooted Phone
Jan 3, 2016After i unlocked my bootloader and rooted my phone, everytime i boot up my phone i have this msg and then the phone start, how do i get rid of this msg?
View 10 RepliesAfter i unlocked my bootloader and rooted my phone, everytime i boot up my phone i have this msg and then the phone start, how do i get rid of this msg?
View 10 RepliesIs there a way to remove the warning on boot, after the bootloader has been unlocked.
View 8 Replies View RelatedCannot seem to flash factory image from Google. Trying to do it via adb but cannot push onto device. Says "cannot open no such file or directory". What can I try?
View 7 Replies View RelatedI have rooted and unlocked bootloader xperia neo v. I can't turn on it.I'm using custom rom and kernel. It doesn't respond to power button, you can hold power button as long as want and no vibrate or red led blink. I tried to repair via update service, but it can't find my phone... Phone looks bricked..
View 1 Replies View RelatedI recently unlocked the bootloader and rooted my Nexus 6P and just this evening received an update for the November Security Update. This downloads fine but when the phone reboots to install, it just goes to TWRP and doesn't install.
This is most likely incredibly simple and stupid for me even to ask, but is it possible to install one I've unlocked/rooted?
My son's nexus started rebooting on its own here and there a little less than a month ago. Last week it started boot looping. I would have to turn it off(only worked sometimes by going into fastboot mode). Tried resetting and wiping in recovery with no luck. This problem gets worse when it's plugged up to a computer the phone turns into a reboot machine. I read up it could be the power button and took it apart to find the button works fine (still cleaned out though).
View 10 Replies View RelatedI have rooted and installed TWRP in my nexus 6p and now I have received the OTA update but I can't install it. How can I install it without losing my data?
View 10 Replies View RelatedIf I was to unlock my bootloader and root my phone, should I still grab ota updates?
View 4 Replies View RelatedHow to be able to get snapchat working if they are rooted? I've tried the rootcloak xposed modules and snapprefs but still can't get through. So many of my friends use snap chat I don't want to completely avoid it.
I did not have this problem with my rooted Z3c so not totally sure what's wrong.
Rooted and seeing this on 6p? I unlocked this phone, installed TWRP, and then installed the N6PanglerM ROM. When an app request root, I see the box appear and I can grant or deny, same as always. But in my app drawer, there is no listing for SuperSU. When I go to the Play store and look at SuperSU, it says installed but the Open and Uninstall buttons are both missing.
How I can get the SuperSU app to be visible?
Is their a way to update while being rooted, and keep the data. I am thinking that after I lock the phone and update it, and re root it, that my phone will be wiped completely
View 1 Replies View RelatedSnapchat is not working right after I tried to use snaprefs to upload a pic, I cleared app data to get snaprefs working! I did softreboot a few times, then when I tried logging in snapchat I wasn't able to.. I got a pop up saying
"Oh no, your login temporarily failed, So please try again later. If your login Continues to fail, please visit (I can't Add links as I'm a new member)....
Image : [URL] ......
Later I installed rootcloak and tried to hide root acess to Snapchat, even then I get the same message! How to get snapchat working without unrooting ?
I would like to have my phone rooted but i like stock and i like having the security updates. is there a way to have my cake and eat it too?
View 10 Replies View Related128 GB Frost Nexus 6P, just got it today in the mail and decided to restart the phone after a day of installing all my apps and re downloading all my music, and now its stuck in the colorful bootloop and has been for over 2 hours. Not Rooted Not Unlocked, how to get it out of this.
View 10 Replies View RelatedI am currently on stock rom but rooted. An Ota update popped up can I update without bootloop....
View 10 Replies View RelatedI'm not an Android rooting noob (my rooting goes back to OG Moto Droid in late 2009) and I'm sure it's something ridiculously simple I'm missing but I can't get my bootloader to unlock. I've tried ADB/Fastboot, WUG's Nexus Root Toolkit, and Chevy's Android Job Box. Nothing works.
I got my 6P today, SIM'ed it up, booted up, logged in, enabled USB debugging, installed the drivers, and let it update. When I opened WUG's NRT, I saw that I had an Android build one step later than the NRT. Mine's MD80BL and K is the latest in the NRT. I thought that shouldn't be a problem and selected the "any build" option with the Nexus 6P. I went through the installing drivers process and can access the file structure of the phone through W10.
I then went to the unlock bootloader option, clicked through the prompts until the phone rebooted into the bootloader and clicked the OK button to unlock the bootloader. About two seconds later a window popped up on my desktop telling me my bootloader was unlocked, my data was wiped, and I would have to go through the setup process on the phone. Excellent, except my phone booted right back to my stock homepage. I tried again with the same result.
I then tried it manually using ADB/Fastboot. The "fastboot devices" showed a connected device which I assume is my 6P since I have nothing else Android connected. When I type in "fastboot flashing unlock" I get all the fastboot commands/options as if I typed an unknown command. "Fastboot oem unlock" didn't work either. I went and downloaded the latest SDK and retried everything with the same result.
I came from getting my nexus 6P and I wanted to install twrp and etc... So I went to into developer mode, I check USB debugging and enable OEM unlock.
I head to my computer open a commend prompt that's has the fastboot and adb drivers. I connected my nexus 6p and I enter the following commends
Adb reboot bootloader
Fastboot devices
(Showed me my devices)
Fastboot OEM unlock
And just after I hit that I got the following
...
Failed ( remote : commend not found)
Finish 0.18
I checked oem unlocking and usb debugging. Fastboot and adb work. I unlocked to update to 6.0.1 a few days. I want to flash custome roms. so I went to unlock bootloader and get the following:
C:adb>fastboot devices
ertyugg(this edited for privacy) fastboot
C:adb>fastboot flashing unlock
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
[Code] ....
Message shown :
options:
-w erase userdata and cache (and format
if supported by partition type)
-u do not first erase partition before
formatting
-s <specific device> specify device serial number
[Code] .....
I left my phone on over night and it downloaded a January security update. I'm on systemless root, is this thing safe to install? Here's a screen I took.
View 10 Replies View RelatedOk, so I just got my awesome new 6P. Here's what I've got so far:
I have the SDK, ADB and Fastboot components installed, drivers listed, and everything like I've been reading here and other forums.
So far I've been able to verify that ADB and Fastboot both seem to see my device OK so I know the drivers are good.
USB debugging mode is enabled in the Developer menu, and the option for 'allow oem unlocking' is enabled as well.
From what I'm seeing this all adds up to 'should work', but it isn't.
I originally tried the 'fastboot oem unlock' command found in older posts, and when that didn't work found (from what I'm able to determine) the latest command of 'fastboot flashing unlock'. Unfortunately, all this gets me is this: [URL] ..... (wont let me just link the image since I just had to make a new account. Been too long since I last logged in apparently ...
So I think I know the answer but wanted to validate. If I leave the bootloader locked on my device and download a factory image from Google, cannot I just put the zip on the sdcard storage and run it through recovery to update? I don't think that I need to unlock the bootloader do I? I am trying to keep everything stock for now, but updates are a big reason I wanted this phone. Also don't want to break Android Pay.
View 4 Replies View RelatedI forgot my unlock pattern and I don't have my device in ADM ... But the bootloader is unlocked, so I think I can install any image I want, right? Could this be a way to get into my device? So any solution to unlock my device without doing a hard reset?
View 5 Replies View RelatedI'm running stock 6.0.1 rooted with Xposed (only using gravitybox). When I do the double tap on power to launch the camera, nothing happens other than the power button functioning normally. It did work at one point but I'm not sure if it was an app, Xposed or a system setting which stopped this feature from working. I tried disabling Gravitybox but left Xposed itself still installed. I've also tried changing the "Power buttons locks instantly" setting under Security but that didn't make any difference either.
View 4 Replies View RelatedI haven't received mine yet, but probably one of the first things to do is unlock the bootloader. Does the fingerprint verification/ unlock still works with an unlocked bootloader.
View 2 Replies View RelatedI am already unlocked and rooted, but I would like to relock the bootloader assuming that I can unlock it for future updates without losing data. The Nexus 5 had a boot locker app in the App Store which allowed this, but I do not find an option for the 6 P.
View 2 Replies View RelatedI noticed there were 2 newer images on the Google developers page and thought I would flash the latest and greatest (MDB08M) since it wasn't coming down OTA. I enabled Developer Options and set USB debugging and OEM unlock, rebooted to bootloader, did a fastboot oem unlock, rebooted then back to bootloader and ran the flash-all.bat from the new image, rebooted and all was well. I re-enabled USB debugging and went back to bootloader to re-lock the bootloader and am getting an error:
...
FAILED (remote: unknown command)
finished. total time: 0.016s
Results of fastboot getvar version-main are blank:
version-main:
finished. total time: -0.000s
I rolled back to MDB08K but it made no difference. I then tried rolling back to MDA89D and letting it pull MDB08K OTA but that too made no difference.
Do you think it may be possible that we can get root access without unlocking the bootloader - I'm a little reluctant to unlock the bootloader because of the QFuse blowing.
View 5 Replies View RelatedI've an m8 from Verizon unlocked and I need to change my son because I'm using it on t mobile and I've found that I can't change my apn settings in order to have a better internet access I'm uploading a pic of how the setting looks like , and also I've found that there is no option called apn protocol which is the one I am more interested about ....
View 5 Replies View RelatedWith root/unlocking, the finger print sensor will be somehow disabled?
View 2 Replies View RelatedLast year I bought the nexus 6 and for the first time (I've had a lot of android phones) in my phone was also disabled force encryption after the bootloader unlock, twrp and root. So I decided to decrypt it because reading on the nexus 6 forum some devs suggested this to increase the phone performances.
I read that now twrp supports encryption and that Google increased the phone performance also with force encryption enabled.
Is it possible to unlock bootloader, root, flash twrp and somehow flash the stock rom? If yes, where can I get the rom files for flashing with twrp?
View 9 Replies View Related