Huawei Nexus 6P :: Password On Bootup
Nov 12, 2015
Ever since I have unlocked my bootloader I have 2 things that bug me.
1. Whenever I restart my phone it asks for my password/pin/pattern everytime before it will start. It's not a huge deal except when I restart my phone and forget I have to do that part it sits a while waiting for the password.
2. The little "warning" screen that tells me my bootloader is unlocked. Just like the way the old Nexus's were with no warning, just the little white unlocked pad lock on the google screen.
View 10 Replies
ADVERTISEMENT
Nov 16, 2015
Ok so if your phone reboots or crashes, you will need to enter a password or pattern in order for the phone to work. Even alarms and everything won't work until you enter the password. That's pretty bad especially if you NEED an alarm
Some people mentioned turning it on and off and it would give you a prompt to disable it.
View 3 Replies
View Related
Jan 23, 2016
so I accidentally wiped the entire phone and tried to install chroma rom. Now after boot I'm getting an "Encryption Unsuccessful" message. and its asking me to reset phone.
I tap the Reset Phone button and I am taken to TWRP where it asks for a decryption password. I enter "default_password" and the phone reboots with the same issue.
View 1 Replies
View Related
Nov 20, 2015
Damnit. Something went wrong and I don't know how to get out of it.
I used Nexus Root Toolkit 2.0.7. Bootloader Unlock went just fine. Root went wrong (I think). It just sits there at the white Google logo. It never goes to the animated loading portion of boot up.
So, I stopped the process. Then went to select Flash Stock + Unroot to hopefully start over. It still stays at the white Google logo. Instructions say it could take up to 20 minutes, but I waited for about 30 and nothing happened.
So I entered Recovery. Formatted/Cleared all data and started fresh with the unlocked boot loader. I was able to flash TWRP and actually flash a custom ROM. It loaded, but the phone boot looped when I tried to flash a custom Kernel.
Fine. I went to restore a backup I made before flashing the Kernel and it boot looped. Restoring the backup did nothing and I couldn't load anything.
Loaded up Nexus Root Toolkit again, tried to root and it just stays on the white Google logo. Tried Flash Stock + Unroot and it still sits at the Google logo.
WTF. I've been doing this for a long ass time now.
View 9 Replies
View Related
Nov 6, 2015
So I went ahead and started to root my Nexus 6P. I installed the systemless modified boot.img and TWRP, then I sideloaded the systemless SuperSU in TWRP. I am encrypted and TWRP can decrypt still, however when I try to boot the phone, I get the Decryption unsuccessful message and it wants me to reset the phone. I hit reset, it factory resets in TWRP, and it just comes to the same screen upon boot.
View 3 Replies
View Related
Nov 23, 2015
I'm looking to find a way to move my app settings, data and passwords (mainly settings and passwords...just hate having to re-enter all that mess) from my Note 3 to my new Nexus 6P. Looked at a few apps but those seem to only move contacts, pics, and stuff like that. I always backup everything on my Note 3 with Titanium backup...so am I going to have to transfer my backup from my Note 3 to my Nexus 6P to restore all that or is there a direct way to do it?
View 10 Replies
View Related
Nov 5, 2015
I unlocked my bootloader, flashed Chainfire's systemless boot.img, flashed TWRP twrp-2.8.7.1-angler.img and when I took into recovery TWRP is asking me for a password to decrypt. I don't remember setting a password and don't know if there is a default one.
View 10 Replies
View Related
Jul 27, 2015
Have a Nexus 5 running the latest lollipop build that has been working properly for a while (Phone is a Google refurb from November 2014, replacing my original N5 that had battery issues; Warranty expired Feb 2015)4 days ago, it randomly rebooted and then got stuck on the "Optimizing apps" page on initial bootup - would never go past a certain app number.First tried wiping cache - which didn't complete even after 48 hours.
Next tried full wipe from recovery, which worked but then shutdowns still happened.Reflashed all stock images (Phone is stock, not rooted) last night - problem still exists with random shutdown - but I can always get past initial setup; shutdown problems happen a little while later during use.Wiping cache from recovery now gives a "Could not mount /cache/" error in recovery
that there's sector(s) on the eMMC that's borked. It's a 32GB phone - is there a way I can flag off a certain sector as "bad" and put the cache partition somewhere else? Also, replacing the eMMC chip if needed (I can find someone set up for BGA work). I considered doing a file check from Philz / TWRP, but since the issue persists after a full reflash/reformat I assume that it's not a software bug.
View 1 Replies
View Related
Jul 4, 2010
Having purchased a new Nokia E75 yesterday I set the phone up today. After switching off the phone and placing it on-charge I now find the phone will not start at all?
View 6 Replies
View Related
Dec 16, 2015
When I try change Notification LED Color, The primary color "Green" and "Blue" do not seem to work. But when I move the slider down, I get RED, Pink, Yellow and Cyan.
Using Elemental-X 1.02 Kernel and tried with Chroma, Noobuilds and PureNexus.
View 10 Replies
View Related
Nov 4, 2015
Any good recs for a USB to USB C cable that is longer than 1 foot? At work I'm constantly plugged into my lap top but this short ass cable isn't cutting it.
View 10 Replies
View Related
Jan 19, 2016
Is there a way in the stock messaging app, or is there a specific messaging app available in the play store where I could:
Draft a txt and then send to multiple recipients without each recipient being able to see the other? Basically the same thing as sending an email to multiple people via BCC option.
Would be handy for business purposes. I don't care if they see my contact. I just don't want them to see eachothers contact since not everyone I'd send to would know the other (and/or want their contact information shared).
Obviously I could copy and paste the same message to multiple people via individual txt msgs... but being able to send a group txt would be way more efficient.
View 1 Replies
View Related
Dec 19, 2015
I got my Nexus 6P in australia yesterday and I was playing around with the settings. One of the things I wanted to enable was Now on Tap but everytime I try and enable it (either through holding the home button, or doing it through Settings), it won't enable! When I click Get Started, nothing happens. If i'm in the settings app, the toggle just turns off after I press Get Started.
View 1 Replies
View Related
Jan 16, 2016
I searched all over the internet for the SAR level in the EU standards but all i could find is the US. (I probably not going to answer to you in the next few days going to work).
View 1 Replies
View Related
Jan 6, 2016
I am rooted on stock 6.0.1 with ElementalX kernel. I have Xposed installed, but I've tried disabling all modules. I've tried deleting the stock clock data and cache. There are no alarms set or off. I've checked the alarms.db file and there are no entries.
How do I get rid of the icon and lock screen info? I only have the Google Clock installed.
The only Google result says to do a battery pull on a different device. Can't really pull the battery on this phone, though.
View 2 Replies
View Related
Jan 18, 2016
I tried to install Cataclysm ROM, and then it went into some sort of installer, after that I tried to reboot, but TWRP said it didn't have any OS?? So i tried to boot it up anyway? but nothing, just stuck on Google Logo. After that I tried to boot into TRWP agian. But then TWRP says "Mount Decrypt Data" and then i have to enter a password?? but i removed my pattern lock before flashing.
Because i made a Nandroid and i read i had to remove the password before making a backup. But then i just press cancel. Then it says " Unmodified System Partition" "Swipe to Allow Modifications" and i do that. Now i have nothing on my SD card?? Then i thought i could flash stock through Fastboot/ADB, but now it won't see my device in ADB? I have updated my drivers, both by Google and Intel But nothing? so i cant return to stock and can't boot up.
Some how i got i to reboot by an ADB command and then i could flash factory image and return to stock.
View 1 Replies
View Related
Nov 23, 2015
I've noticed something since I got my phone and that is that certain notifications (Snapchat and Messenger are the main 2 for at the moment) will not make a sound unless my phone is either: Unlocked or locked with the screen turned on. Sometimes I won't get even get the notification until I actually unlock my phone which then all the notifications (sometimes 10+ messages in a facebook group) will pop up and vibrate my phone multiple times.
View 2 Replies
View Related
Jun 20, 2012
I recently downloaded BBM updated version and rebooted the phone, which rendered the phone completely useless. It does not boot up, just gets stuck at the Blackberry first loading page with the status bar showing 100%.
View 1 Replies
View Related
Dec 18, 2015
when I open my camera it shows only camera logo and the shot button at the bottom. it happned on stock and I am now on purenexus and the same. what can I do. (its not hardware because camera is working after few seconds when restart and than its crashes)
View 10 Replies
View Related
Jan 1, 2016
I've been on the Pure Nexus rom for a while now and I wanted to try out the Screw'd Rom. So I downloaded and installed said rom. When It boots up and goes to the setup wizard I get no network data what so ever. I looked through the thread and it said to also flash the update vendor.zip. I did that hoping it would bring back my data but it didn't. So I decided to go back to the Pure Nexus rom, clean install, and again I have no network data. What I could do to get it back? I've tried messing with the APN settings but no dice. I should have made a back up before switching roms but unfortunately I forgot to do so.
View 2 Replies
View Related
Jan 15, 2016
As the title says, on LG G3 I used CPU Temp app but it doesn't support Nexus 6P (it only gives estimated reading). I tried many apps and none of them works except for CPU Z but this one gives me like 15 different temperature readings and doesn't say what is what.
View 1 Replies
View Related
Jan 5, 2016
I've been getting reboots semi randomly for the last week or two. Going back two weeks ago I was having some pretty poor battery life compared to some other users so I tried to do a full purge and restart. I went through the file manager on twrp and deleted any folder for any app that I wasn't using in a possibly misguided attempt to curb any file conflicts. After I did this I did a fresh install of cataclysm and Franco. After running into some reboots I tried with Kylo kernel and had the same issue. I then tried full wipe with Ubermallow and Kylo and had the same issue. Then I did a full lock, unlock, flash stock, root and recovery, and fresh install of chroma and Franco and it still reboots.
What I want to know is whether or not this could be a hardware issue and if not how to get this to stop. It's seems so random yet specific and it's happened on so many different installs. I have been rooting my phones since the OG Droid but I have never had an issue like this that lasts through so many installs of so many different things.
View 1 Replies
View Related
Oct 31, 2015
I have just come from a Note 4 and the one thing I miss is the teamviewer control via a PC (quicksupport addin for Samsung). All you get with the Nexus 6p is mirroring and not control currently. Any reliable remote control ie desktop controls the android phone?
View 2 Replies
View Related
Nov 11, 2015
Occasionally, when using the slow motion setting the video will record, play back in slow motion, but the fps will not be up to par - as in, it'll be set to 240 fps but will most definitely look choppier and not as smooth as I know it should be. A restart of the phone usually fixes this but there's no way to tell if it's not working until I record a video and play it back. Also, all the sample slo-mo videos online look so crisp and clear, while my videos tend to look pretty noisy, even with decent light.
View 4 Replies
View Related
Jan 31, 2016
I Have the nexus 6p on version 6.0. Just this morning my phone was working fine and all of a sudden I have No sound audio. Notifications work. I cannot hear any sound apps like youtube, music players.. Do Not Disturb is not on. I go into sound and notification and everything is turned on and all the way up. When changing a ringtone I can hear all the options.. But NO audio... I have factory wiped/data my phone.
View 1 Replies
View Related
Oct 14, 2015
I purchased Huawei Nexus 6P phone 1 week before and i want to print screen like samsung note-II phone but i am not able. I have to send print screen for my web hosting site.
View 7 Replies
View Related
Jan 30, 2016
Just got my 6P today, activated it on Verizon, and noticed I have no internet access while on a call. upgraded from a Galaxy S4 which was able to do both at the same time.
View 3 Replies
View Related
Feb 10, 2016
I deleted both my Facebook app and messenger, and I had much better battery life for a few days. Now however, my sot is barely at 2 1/2 hours again, and my top usage is chrome. It's pretty frustrating because I stopped using Facebook altogether, and in still having poor battery. I think chrome is not letting it doze.
View 9 Replies
View Related
Nov 22, 2015
I'm looking to get a Nexus 6P, but I'll be using it for around two years (give or take, depending on what devices I can choose from in two years), and I've heard that AMOLED burn-in may become prevalent within a year or so. For some probably won't notice, even I probably wouldn't if I didn't find out that burn in exists, but I'm paranoid, so I'm thinking to use GMD's Hide Nav Bar (Root) app that I've been using on my Nexus 4 (for the sake of extra screen real-estate).
I'm wondering if this will minimize and effectively prevent burn-in of the Nav/Status bars? My main concern is the Nav bar, as Samsung's devices don't have them, making burn-in far less of an issue.
View 6 Replies
View Related
Feb 21, 2016
How come when I add different themes they don't stay after a reboot? I'll add a whole theme...then just add a status bar from another theme and after a reboot it defaults to my first theme applied. I've tried different combos of adding themes and no go.
View 1 Replies
View Related
Oct 25, 2015
Question 1)Can I use both? Will ambient display show messages... Then when screen closes, the led kicks in?Or would screen light up and led at same time
Question 2)I use AC display... Which is sort of ambient display(never owned a moto or nexus 6). Is ambient display basically the same thing? Meaning I won't need that.
View 3 Replies
View Related
