Galaxy S6 :: Samsung Boot Animation Shown Without Sound
Jan 9, 2016
I have a G920F and the boot animation is not working as it should. I'm on 6.0 Beta and don't think the problem is coming from the beta because if I remember correctly, the first time I booted the beta everything went smoothly. I am not rooted and the phone is completely clean.
The problem isn't a big one, but it isn't working normally. When I boot my S6, the 'Galaxy S6' screen comes, then no boot animation is shown, a black screen is shown instead, then after the small vibration, the boot animation is then shown without the sound. (an the phone is not in silent/vibrate mode)
My guess is flashing a new stock ROM fixes the problem, but I don't have enough time to sort the settings and stuff out after flashing.
...and none of them state their file type. I understand I'd need to backup/rename the file before I replace it with bootanimation.zip ?I also tried flashing the .zip file in CWM recovery mode, but I hadn't renamed the file to bootanimation.zip and the update aborted. Would this be necessary for it to work?
I upgraded a few days ago to the Razr from the X2. I noticed that the boot animation sound volume is so low I can barely hear it. Is this normal? Is there any way to increase the volume of the boot animation sound?
very first message here at this forum, I've just got my SGSII 1 week ago :-) wanted to organize all my apps into folders, so I did create folders and distribute them all among them.urious thing is that if all folders fit in one single page and all apps are inside those folders, apps are not shown at all.'m getting thing:If I pinch to see all pages, I can see my page with all the folders:f I touch to select, I'm back at a blank page, as in the first image attached.To see my apps, I just edited them and moved one folder to another page, and now I can see a page with one folder and another with the rest.
I recently rooted my HTC M8 (Carrier - 3) and am trying to remove the carrier boot animation. I already like the HTC/Android bot animation I already have, it's just that the carrier boot animation gets in the way. I don't need to change or replace the boot animation in any way whatsoever - I just want to REMOVE the carrier boot animations.
Upon navigating my way through System>Customize>Resource I find the following folders:
Now, assuming I am correct that the files beginning with "H3G" are the carrier boot animations, I have proceeded to go ahead and delete all of them, except the files starting with "hTC". Upon rebooting my phone, the carrier boot animation is still present, and when navigating back to the Resource folder, the "H3G" have magically reappeared. Now I'm a little annoyed.
So I turn back and head into the CID folder and play around with the XML files. When entering the CID folder, as well as the default.xml file, I find the following:
So recently for some reason my Nexus 5 gets stuck on the booting animation. I think it was updating to 6.0.1 or something but I'm not sure, because I just woke up one day and the phone wouldn't boot, and when it finally did it just gets stuck on the boot animation. I've tried to flash stock images and etc but I need an unlocked boot loader and for some reason if the phone doesn't boot completely after unlocking the bootloader, then it gets re-locked. So now my last option is to use the stock recovery to wipe data or something but when I go to the screen with the dead android guy, no combination of buttons seem to make the recovery options show up.
I recently got my 6P and immediately proceeded to unlock the bootloader and flash TWRP to start loading custom roms. I decided to start use Pure Nexus with it's accompanying gapps package but when I go to reboot the device, I am stuck at the circles boot animation.
I decide to try CM13 nightlies and the same problem occurs. After searching online for some time, I realize I needed to flash a SuperSU file from recovery that flashes a custom boot.img. I flash Version 2.66 and restart the device. After 5+ minutes on the boot screen, I decided I am stuck still. What do I need to do, I am unable to boot the device.
My N5 decided suddenly the other day to stop working. I held it, it turned off and on and then the boot animation just continued. I have googled and tried everything I can but it seems to go wrong someplace every time. I tried to wipe it from recovery mode but then it gave this as "error message".
-- Wiping data... Formatting /data... E:Failed to mount /cache (Invalid argument) Formatting /cache E:Failed to mount /cache (Invalid argument) E:Can't mount /cache/recovery/log
My device: LG Nexus 5 - Lollipop 5.1.1 LMY48B Unlocked bootloader; Rooted; ClockWorkmod 184.108.40.206 (not flashed - just boot on image when used);
I've made a nandroid backup with cwm. Backed Up the files to notebook via adb pull. Then, wiped factory reset (in cwm) and flashed Developer Preview of android M. Boot on android M works like a charm. Then, made an android M nandroid backup with cwm. Backed up these files to notebook via adb pull.
Then, bring back the files of first nandroid backup to device, via adb push. Pushed the correct folder to /data/media/clockworkmod/backup.
Trying to port a custom Xperia Z1 Rom to Nexus 5.This custom Rom has all features from Xperia Z5.
Edit : Advanced, see logcat Edit 2 : fixed mediadrm fatal crash. Now, i need to fix SDCARD Edit 3 : seems i need to fix sound Edit 4 : Booting, as logcat says.
The problem is : Google Logo stays displayed. Bootanimation doesnt displays and so, it seems it prevents phone from displaying Setup Wizard, and Android UI. Maybe the problem is "libsecureui.so" dlopen failed.
I am running the Purity Rom on my Nexus 5. Now I wanted to change my boot animation. I wanted to know if Purity allows me to change the boot animation and what is the quickest and safest way to do this. And one last question is changing the boot animation risky?
A friend asked me to look at his Nexus 5. It seemed as though his son was trying to flash a custom rom but somewhere along the way things went wrong and it got stuck on the boot animation.
I tried resetting it to factory using this thread. Followed method 2 and finished it up with "Wipe data/factory data" reset. I did not however relock the boot loader.
I used the factory image 6.0.1 (MMB29S).
Everything went well, no errors, but even after doing all that the phone is still stuck on the boot animation. I tried redoing the "Wipe data/factory data" reset, but the phone is still stuck on boot animation. I left for around 20 minutes with no change.
All the other threads I have read seem to indicate doing the "wipe data/factory data" reset should correct this issue but it hasn't seemed to work.
Then i installed Pure Nexus rom and it was working fine. Then i installed Elemental X kernal, didn't change anything from stock options other than double tap 2 wake, and it would stay forever in the boot animation. Not a boot loop, but the animation with the circles. So i figured, i had a TWRP backup from before i rooted and all that and restored from that, still same never ending boot animation
EDIT::: I unchecked selinux enforcing but i still get the same issue. I noticed when trying to restore from recovery it would reboot when trying to flash the system, and that it would not be able to flash the system while trying to install pure nexus rom.
So I updated to Marshmallow from Lollipop via fastboot on my Mac. Upon installing SuperSU and rebooting, I got stuck on the boot animation. Cache wipe and factory reset - still no go, and after the factory reset, I lost TWRP. I tried installing it again only to receive a black screen when rebooting into recovery mode. Tried another factory reset and reinstalled Marshmallow - same issue. I have contacted Google and there's nothing they can do.
I just want to preface this by saying I cannot root my phone. Not because I am incapable but because this is my corporate phone and I would no longer be able to use it for work related things if I rooted it.
I am using a Bell Canada Samsung Galaxy S6. Every person I've come across that has an S6 or newer samsung phone is able to boot up on silent and not get the samsung noise when the logo comes up. I tried doing a hard reset on my phone just to test to see if my phone would boot silently if I set it on "Mute" mode and it did WITHOUT encryption but I am forced to use encryption by my company's device management policy app or I can't access other things like my e-mail.
How to get the device to boot silently without rooting with these factors in mind? I reached out to samsung and they were clueless. As far as the support knows, the phones cannot boot without the noise even on "Mute" mode which is clearly not the case.
I've tried the Silent boot app as well with no success. I've noticed this happens only when encrypted and upon checking the volume settings on the screen where you have to put your encryption password after booting up, the volume settings are kicked back to default.
I modded my RAZR V3t last year with a custom startup animation and sound. I lost the backup of the originals and I need them back to Re-T-Mo it to give the phone to someone else.Anyone have the "Stick Together" animation (RAZR-sized) and the newer version of the Moto Startup sound?
I have had several occasions on turning on my AT&T Galaxy S2 phone where all 7 of my screens were blank except for the 4 icons at the bottom. In fact, every screen had a message in the middle saying to drag items to add them to the screen, like it was *supposed* to be blank. Before today, turning the phone off and on again resolved this.In fact, when I clicked on the Applications icon at the bottom, got nothing but a spinning circle. After a minute or two, I pulled the battery, returned it, and powered up again. This time, everything is again normal. But I am concerned. This phone is just 5 weeks old.
I got a Samsung S6, been good for 6-7 months now. Today it just shut off, battery was at 25-35%. I turned it on and it has since been stuck on the logo screen. I searched it up on the internet and tried doing a reboot with Volume down and Power/lock screen, but it just goes back to the logo screen and wont go past it.
My GS5 was working just fine this morning. Out of nowhere I picked up my phone and it was on a black screen with green, white, red, then white again, then grey, blue and red words. It reads as follows;
BOOT RECOVERY MODE CHECK BOOT PARTITIONS sbli partition doesn't exist ODIN MODE PRODUCT NAME: SW-G900A CURRENT BINARY: SAMSUNG OFFICIAL SYSTEM STATUS: CUSTOM REACTIVATION LOCK(KK): OFF KNOX WARRANTY VOID: 0x0 QUALCOMM SECUREBOOT: ENABLE (CSB) RP SWREV: S1, T1, R1, A2, P1 SECURE DOWNLOAD: ENABLE UDC START
I have tried everything from removing battery, removing SD CARD, SIM CARD, connecting to charger, connecting to USB cable on my laptop, holding volume up, home, and power button. My biggest fear is losing all my data. I have 100's of photos of my 3 month old newborn on my phone memory because I was running low on my SD CARD. I can't fathom losing all her newborn pictures.
I wanted to root my galaxy s2, i followed the instructions up till the point where i flash with odin with an insecure kernel, after reboot , the phone is now stuck on the samsung boot screen.I cant even boot into recovery modem.
I was charging my phone while using it and it suddenly shut off. Whenever I try to turn it on the welcome screen "samsung powered by android" comes up for 1 second and then goes black and nothing else happens. I've had the phone for about 8 months and never rooted or installed any software other than official updates. I was just playing a game while it was charging when it stopped working.
every combination of buttons i press even the factory reset gives the same result, the welcome screen for 1 second and then nothing. I was able to get to the OS change warning screen though but when i cancel it goes back to the welcome screen problem. Charging it shows the charging symbol going on and off every second.
Is it only possible to use one sound for all notifications? I thought I'd be able to set different sounds for email, text, calendar. I also use BT Fon app for wifi and this uses the same as all the rest.
I've set tone for email in email settings but now that gets played as well as the tone that's set for notifications in settings>sound>notification ringtone, when I only need one alert.
I have a problem with my new SGS2 and could not find anywhere a solution for this. When I record a video there is no sound recorded also, only the image... In the camera application there is no option for enable/disable this feature like in the SGS1.