BB Torch :: How To Change Alarm Clock Weekdays Setting
Apr 5, 2011
I have set the calendar so that Sunday (in UAE) is the first working day of the week. When I select weekdays for the alarm it doesn't recognise this and doesn't go off on a Sunday. It still goes off on a Friday which is the weekend. So I have to remember to keep switching it on or off How can I change this setting?
Every time I try to it says connect it says speaker cannot be turned on while using bluetooth headset. If I don't have it connected to the headset it says please connect the handset it works as the antenna. What can I do? I would like to be able to use the radio on this as an alarm clock as it is an option in the alarm settings but yet it cant be played out loud?
so, thing is that i have wednesday and thrusday off at my work.now i had nokia before and it allowed me to setup my daily alram for mon, tues, fri, sat and sun (my work days)i cant seem to do that on my bold 9000(i know my schedule sucks but hey .. i have a job atleast )
I have a problem where the alarm going off makes the UI almost impossible. I have to keep tapping on the snooze or the disabling button until it finally takes my input, it is aggravating. Another one is that when I tap on the headphones, from the jack, the music switches to handset, I have to tap it a bit hard and at a certain point again to get it to switch back to headset.The headset jack problem got worse in an update with 6.0(later type of 6.0 version), so I reverted(maybe the first 6.0 version), but that doesn't fix the problem, still, but it is less aggravating than before.
Lumia 900 failed to wake me up this morning. The alarm just did not sound at all.
- Alarm was set and was shown to be in use. Even the Icon in the start screen was shown - Tried multiple times afterwards setting the existing alarm a few minutes forward. None of the attempts alarmed.
How I set the alarm is that I always edit the existing alarm, edit the time and push the alarm on.When I tried creating a new alarm (a few minutes forward), that ringed ok. But the existing alarm failed to ring
I love the bedside mode of the Storm 2, especially with the dock I recently purchased. The only problem is, I like the room dark as possible and even with the phone in bedside mode when charging, and the setting check to dim the clock, it's still far to bright.
Is there a way of having clock on, but have the screen go off with the usual setting to black the screen after say 30 seconds or whatever I choose for the backlighting time out, then have the screen come on if I reach over and touch the screen to display the clock, then letting the backlighting go off again after the preset time?
This would make the setup perfect for me, allowing me to use the Storm 2 as a bedside clock without having to have the display on all the time, but being able to turn it on for a short period of time as needed. If this is possible, can somebody post the settings needed
I have a blackberry torch. it has recently been replaced on the insurance, but now i can not set up my e mail accounts or connect to blackberry net (facebook, twitter). When i try to set my e mails up it asks me for the enterprise activation password. I have tried countless times with vodafone to rectify this. They sent me a link to activate my e mail accounts, but they are still associated with my old blackberry pin number. Vodafone have now told me to contact the manufacturers to change the security access to my new pin number, as my details have not updated like they should have done.I can not find any numbers to contact these though. I am getting increasingly frustrated with this as i am paying for a service i can not use, and they cant rectify.
I use my iPhone's alarm clock to wake up on weekdays. Twice now, it has failed to go off in the past week or two. When I look at it, it's "Off," but I haven't turned it off. In fact the only time I ever launched the clock app was to set up this alarm, except when I've had to turn it back "On."
Of all the bugs, this one really bothers me. I just deleted the alarm and made a new one. Hopefully, this doesn't happen again.
I am a long time Android user, but just recently got the LG G3 (32GB version) with Bell Canada. I had a Samsung SIII for the past few years and upgrade time came. So I did my research, found the LG G3, and so far I've been very happy.
There is one issue, though, that I have found with the alarm clock. I first noticed it Saturday (I got the phone Friday), set up the alarm clock app, and made sure it worked (by setting it 2-3 min in the future and waiting). Saturday morning, I found myself naturally waking up, I didn't think much of it as that is normal for a Saturday. Then I realized that it was around 9 AM (the alarm was set for 8 AM), I asked my wife if she heard it --- she said, "no". So then I set it for a few minutes in the future again, "must have slept through it", I thought (even though I could wake up to the SOUND of the display coming on).
Sunday morning I got woke up by the kids at 6 AM, but noticed that the alarm DID go off at 8 AM (the difference being that since 6 AM, I had the device unplugged and had been using it).
Today, I had my alarm set for 5:30 (my normal waking time during the week), I woke up to the sound of my wife's alarm at 5:45, mine definitely did not go off. I rolled over and opened the alarm app --- everything is set up properly. So then I figure that I'll set it for 5:50, do so, and it goes off at 5:50, I snooze it and it goes off at 6:00.
This morning I installed Alarm Clock Plus, but I won't know if it works properly until tomorrow morning. All my Stock alarm settings are correct, I DO have Quiet Mode turned on for the duration of the night (10 PM -- 6 AM), but some of the tests I ran (eg the 5:50 one) were ran during Quiet Mode. In Quiet mode I have "Block alarms" unchecked. Under the stock Alarm Clock's settings I have "Ring in Silent Mode" checked as well.
I set my alarm the night before and by the time morning comes the alarm is turned off by itself. The icon goes away and I have to go into the clock app to turn it back on.
I am not able to set the alarm on the clock or calendar I don't know wats wrong because I have only had this fone 4 two weeks I have tried to pull the battry out several times and even went to the extent of updating the software and its still not working .
in the Applications folder but can not find the alarm clock, but in the main screen of my blackkberry curve is the clock symbol. So the clock will continue playing but I can not disconnect because I find the clock icon in the Applications folder.
I have Lumia950 and Windows 10 and time settings is set to 24-hour clock and region and local set to Iceland (I've tried other region settings and all the same).
When I set an alarm I only have option to use 12-hour AM/PM format. Is there a way to have the alarm using the 24 hour format?
(Good news is that the calendar alarms now allow 24 hour format for reminders which was not possible on my 1020!)
Alarm clock app for 950XL with following attributes: can use customized sounds like Ringtone/Music each different alarm time can be customized for its own sound from Ringtones/music. Does not repeat at all if at each preset time when alarm sounds is not snoozed or cancelled, i.e., just sounds once at specified time and waits for next alarm time.
Having issue with the alarm clock not staying on the alarm they choose. Today is the second time I chose an alarm and it didn't go off because the phone had a different alarm set.
I can not set my alarm for 2:30 am since daylight savings time went into effect today. It changes to 1:30 - I can set it for 3:30 correctly. Will this correct itself after midnight tonight?
how to turn off the vibrate function on the alarm clock on the 5S without I must install other apps? Note that I still want it to vibrate for the other notifications.
Since I installed the maemo update, my alarm clock is not working anymore. well, it's working, but it doesn't make any sound. I tried to change almost all possible settings concerning sounds on the phone, but it still doesn't make any sound.Does anyone else have this problem? Or a solution?
When I set the alarm clock on my new 2700 classic, it does not sound or vibrate in the morning, and the alarm bell symbol indicating that the alarm clock is set has disappeared?My dad has the same problem with his Nokia, it may be the 3610 fold but I am not sure. We have both had many Nokias before and never had problems with the alarm clocks.I searched the discussion boards for similar topics but found no threads?
I cannot seem to find a setting to adjust the volume of the tone that the alarm clock makes. The alarm volume is very soft and not loud at all. It doesn't wake me up.Could someone please show me how to adjust the volume of the alarm clock? Please?
I have a black nokia lumia 800. The firmware version in 1600.2483.8107.11501 (still waiting for 12070 one). Battery is ok, sound quality is horrible, but my real problem is the alarm clock - it just doesn't work! I rely on my phone to wake me up for work and it doesn't do the job. I've tried renaming the alarm, setting it to repeat on couple of days or just one time and it doesn't go off. The alarm worked perfectly on my HTC HD7 (the sound quality was also great on this device), but since I've switched to lumia I have to put up with more and more problems
There are + and - buttons on the right side of Nokia X2-02 which you can use for adjusting the volume. Using these buttons you can adjust every application, accept the alarm clock. There isn't also an extra option in the advanced menu of Alarm clock for volume adjusting. While ringing the alarm cannot be adjust using the + and - buttons because when you press them, the alarm just snoozes. The + and - buttons while you are in the alarm menu don't adjust the volume too. But when you set the radio as alarm clock then it works - the volume is so loud as the phone ringing settings. There is also no extra option in the Settings menu for the alarm clock.
I am using on of the song I have downloaded onto my phone as an alarm clock tone. The volume on the device is set to a minimum yet the alarm volume is extremely high - too high to be waking up to. How do I adjust the alarm clock volume.